Kentucky Route 212
Route information | ||||
---|---|---|---|---|
Maintained by KYTC | ||||
Length | 1.131 mi[1] (1.820 km) | |||
Existed | 1972[2]–present | |||
Major junctions | ||||
South end | CVG Airport in Hebron | |||
I-275 in Hebron | ||||
North end | KY 20 in Hebron | |||
Location | ||||
Country | United States | |||
State | Kentucky | |||
Counties | Boone | |||
Highway system | ||||
|
Kentucky Route 212 (KY 212) is a short state highway located in Boone County, in the northern region of the U.S. state of Kentucky. The highway is approximately 1.3 miles (2.1 km) long, and partially constructed as a freeway, with the rest being a divided highway. The roadway links Interstate 275 (I-275) to the Cincinnati/Northern Kentucky International Airport (CVG Airport), and has been designated as a connector route by the Federal Highway Administration (FHWA). A road first appeared near the location of KY 212 around 1937. A short road was built in the location of KY 212 when the U.S. Army Air Corps built the predecessor to the CVG Airport. The road was reconstructed to a divided highway in 1972, and has remained relatively unchanged since.
The original KY 212 went southeast from KY 100 in Meshack southeast to Center Point. This road was decommissioned by 1972, and is now KY 2439.
Route description
Kentucky Route 212 begins at an incomplete interchange with a one-way loop road, named Terminal Drive, in the central region of Cincinnati/Northern Kentucky International Airport. At this interchange, KY 212 is a four-lane divided highway. The highway proceeds northeast reaching a diamond interchange with Kentucky Route 236 (Donaldson Road). A turnaround ramp that transfers southbound traffic to the northbound lanes is located a short distance from the termini of the southbound ramps of the interchange. The roadway continues northward from the interchange, passing a large airport parking lot and a small airport road before reaching a partial cloverleaf interchange with I-275. The road proceeds northward from the interchange, passing a few small businesses before reaching its northern terminus, an at-grade intersection with Kentucky Route 20, known as Petersburg Road.[3][4]
Kentucky Route 212 is maintained by the Kentucky Transportation Cabinet (KYTC). Part of the job of the KYTC is to measure traffic along the highway. These counts are taken using a metric called annual average daily traffic (AADT). This is a statistical calculation of the average daily number of vehicles that travel along a portion of the highway. The highest AADT along KY 212 at the southern portion of the interchange with I-275, with an approximate count of 21,219 vehicles. The lowest AADT along the highway is just north of the interchange with I-275, with an approximate count of 11,100 vehicles.[5] The portion of the highway traveling from the interchange with I-275 to the southern terminus is designated as an Intermodal Connector Route,[6] part of the National Highway System, a network of roads important to the country's economy, defense, and mobility.[7]
Exit list
The entire route is in Hebron, Boone County. All exits are unnumbered.
mi[1] | km | Destinations | Notes | ||
---|---|---|---|---|---|
0.000 | 0.000 | Terminal Drive | Southern terminus | ||
0.293– 0.345 | 0.472– 0.555 | KY 236 (Donaldson Road) | Diamond interchange | ||
0.872– 0.914 | 1.403– 1.471 | I-275 to I-71 / I-75 – Cincinnati, Lexington, Louisville | Partial-Cloverleaf Interchange; exit 4 on I-275 | ||
1.131 | 1.820 | KY 20 (Petersburg Road) | Northern terminus; at-grade intersection | ||
1.000 mi = 1.609 km; 1.000 km = 0.621 mi |
References
- ^ a b Division of Planning (n.d.). "Official Milepoint Route Log Extract (Boone County)". Highway Information System. Kentucky Transportation Cabinet. Retrieved July 2, 2016.
- ^ Kentucky Transportation Cabinet (1972). "I-275 Road Signing Plans". Kentucky Transportation Cabinet. Archived from the original on October 26, 2012. Retrieved November 27, 2012.
- ^ Google (November 5, 2015). "Overview map of Kentucky Route 212" (Map). Google Maps. Google. Retrieved November 5, 2015.
- ^ State Primary Road System: Boone County (PDF) (Map) (2012 ed.). 1 inch=4 miles. Cartography by Planning Division. Kentucky Transportation Cabinet. June 2012. Retrieved November 27, 2012.
- ^ KYTC Traffic Counts (Map). Cartography by Commonwealth of Kentucky. Kentucky Transportation Cabinet. 2012. Archived from the original on October 8, 2012. Retrieved November 27, 2012.
- ^ Staff (October 1, 2012). "National Highway system (NHS) Route List" (PDF). Kentucky Transportation Cabinet. p. 20. Retrieved November 27, 2012.
- ^ Adderley, Kevin (April 4, 2011). "The National Highway System". Planning, Environment, & Realty. Federal Highway Administration. Retrieved November 27, 2012.