Utah State Route 160

From the AARoads Wiki: Read about the road before you go
(Redirected from SR-160 (UT))
Jump to navigation Jump to search

State Route 160

I-15 Business Loop, Beaver
Route information
Maintained by UDOT
Length3.808 mi[1] (6.128 km)
Existed1971[2]–present
Major junctions
South end I-15 near Beaver
Major intersections SR-21 in Beaver
North end I-15 in Beaver
Location
CountryUnited States
StateUtah
Highway system
  • Utah State Highway System
SR-159 SR-161

State Route 160 (SR-160) is a state highway in the U.S. state of Utah providing a business loop around I-15 for the town of Beaver in the south-central portion of the state. The route is the main street for the town and spans 3.8 miles (6.1 km). The highway was established 1961 as I-15 was constructed through the area, replacing US-91.

Route description

The highway begins at a diamond interchange on I-15 heading east and quickly turns north into Main Street. It continues in a northerly direction through the center of the town of Beaver for about 3 miles (4.8 km). In the main part of town, it intersects with SR-21 to the west and SR-153 to the east. After leaving town to the north, the route turns back to the west and ends at another diamond interchange with I-15.

History

The current incarnation of State Route 160 was created in 1961 while I-15 was under construction in the area.[2] It consisted of just 0.4 miles (0.64 km) of road from the I-15 interchange about 1.3 miles (2.1 km) south of Beaver northwest to US-91 (SR-1), which ran through the center of town as Main Street. At the same time, State Route 161 was also created, serving a similar purpose, but on the interchange 1 mile (1.6 km) north of Beaver.

When I-15 was completed north of town in 1964, SR-1 was rerouted as it left Beaver to connect with the new interstate, following the same route as SR-161.[3] As a result, SR-161 was withdrawn to avoid the two state routes overlapping. In 1969, the rest of SR-1 through the town was realigned with I-15. As a result, SR-160 was extended northward to follow the former route of SR-1 along main street north through town, then turning northwest to the interchange at I-15.[2]

Major intersections

The entire route is in Beaver, Beaver County.

mi[1]kmDestinationsNotes
0.0000.000 I-15 – Cedar CitySouthern terminus
2.0063.228
SR-21 west (Center Street)
2.1943.531
SR-153 east (200 North, Beaver Canyon Scenic Byway)
3.8086.128 I-15 – FillmoreNorthern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

  1. ^ a b {UDOT Reference Info |route=SR-160 |access-date=2009-08-17|date=December 2008}}
  2. ^ a b c "State Road Resolutions SR-160.pdf". Utah Department of Transportation. Retrieved 2009-08-17.
  3. ^ "State Road Resolutions SR-161.pdf". Utah Department of Transportation. Retrieved 2009-08-17.