Interstate 74 in North Carolina

Interstate 74
I-74 highlighted in red, future sections in blue, and unbuilt future sections in orange
Route information
Maintained by NCDOT
Length	124.91 mi (201.02 km)
Existed	1997–present
NHS	Entire route
Major junctions
West end	I-77 at the Virginia state line
Major intersections	I-77 near Mount Airy US 601 in Mount Airy (unfinished segment) I-40 in Winston-Salem I-85 BL / US 29 / US 70 in High Point I-85 in Archdale I-73 / US 220 in Randleman US 64 near Asheboro (unfinished segment) I-95 / US 301 in Lumberton
East end	US 74 / NC 41 near Lumberton
Location
Country	United States
State	North Carolina
Counties	Surry; Forsyth, Guilford, Randolph, Montgomery, Richmond; Robeson
Highway system
Interstate Highway System Main Auxiliary Suffixed Business Future North Carolina Highway System Interstate US State Scenic
← NC 73 → US 74

Interstate 74 (I-74) is a partially completed part of the Interstate Highway System that will eventually run from Davenport, Iowa, to Myrtle Beach, South Carolina. In the US state of North Carolina, I-74 currently exists in three distinct segments; from I-77 at the Virginia state line to US Highway 52 (US 52) near Mount Airy, from I-40 in Winston-Salem to US 220 near Ellerbe, and from US 74 and US 74 Business (US 74 Bus.) near Maxton to US 74/North Carolina Highway 41 (NC 41) near Lumberton. I-74 has an extensive concurrency with I-73 from Randleman to Ellerbe in the Piedmont. When completed, I-74 will link the cities of Mount Airy, Winston-Salem, High Point, Rockingham, Laurinburg, and Lumberton.

The 1991 Intermodal Surface Transportation Efficiency Act (ISTEA) authorized a new high priority transportation corridor from Michigan to Myrtle Beach, originally to be I-73. Conflicts over the routing of I-73 led to a compromise in 1995 that created a proposed extension of I-74 from Cincinnati, Ohio, to Myrtle Beach. The first section of I-74 was completed on August 27, 1996, between Steeds and Ulah. I-74 replaced North Carolina Highway 752 (NC 752) in 1998 near Mount Airy, and the entirety of the Mount Airy segment was completed by 2000. A segment of the Interstate was opened in 2008 between Maxton and Lumberton, creating the third segment of I-74 in North Carolina. In 2012, I-74 was extended from Ellerbe to Winston-Salem along US 311. The Piedmont segment was extended south in June 2013 and June 2018 in concurrency with I-73 and US 220 to Randleman.

Route description

As of September 27, 2018, there are a total of 124.91 miles (201.02 km) of I-74, broken in three segments across the state: the Mount Airy, Piedmont Triad, and Laurinburg areas.

Mount Airy

Southern terminus of the Mount Airy segment of I-74. Pilot Mountain can be seen in the background.

The first section of I-74 begins at the Virginia state line (overlapped with I-77 for approximately four miles [6.4 km]). After separation, it goes east and connects to US 52 near Mount Airy, where the first section ends.

I-74 is to be routed along US 52 from Mount Airy to Bethania, where it will then separate onto the new Winston-Salem Northern Beltway and go east around Winston-Salem before connecting to existing I-74 south of Kernersville. Under a new accelerated construction plan for the Beltway, right-of-way acquisition began in 2012 and construction started in December 2014. Until construction is completed, travelers wanting to connect between the first and second section of I-74 should stay on US 52 through downtown Winston-Salem and then take I-40 east to I-74 east toward High Point.

I-73/I-74/US 220, near Asheboro

Piedmont Triad

The second section of I-74 extends from the intersection with I-40 in southeastern Winston-Salem to High Point. Until January 2019, this section of I-74 was concurrent with US 311. This section was designated despite not having 10-foot (3.0 m) shoulders, with the promise that shoulders would be widened later. Signs were installed by August 2014. This section connects directly to another section, called the High Point East Belt. It connects High Point with both I-85 Bus. and I-85. Construction completed on June 7, 2013, extended the freeway an additional eight miles (13 km) to US 220/I-73 at milemarker 86 in Randleman. The highway was originally to be completed by October 2012.

I-74 joins with I-73/US 220 south in Randleman going south to Asheboro. The freeway is already completed but was not allowed to be signed as a full Interstate until the segment through Asheboro was converted to Interstate Highway standards in December 2013. The fourth section of I-74 (and I-73) starts along a bypass of Asheboro where a project to convert US 220 to Interstate standards was completed, and Interstate signs went up in 2012.

I-74 continues concurrently with I-73 and US 220 between I-73 milemarkers 68 and 42 (26 mi or 42 km), the first section marked as I-74 (and I-73) in North Carolina in 1997. It continues south, bypassing the towns of Seagrove, Biscoe, and Candor. Visitor centers (completed in 2010) are located eastbound and westbound at milemarker 61. After exit 41, US 220 leaves the freeway and the route continues as I-73/I-74 for another 16 miles (26 km) toward Rockingham. Though this part of I-73/I-74 was completed in 2008 and is up to Interstate standards, it was initially signed as a future Interstate route because it had not been accepted into the Interstate Highway System by the Federal Highway Administration (FHWA) by the time it was opened, necessitating the posting of future shields. This situation was remedied on July 7, 2011, when the FHWA approved the addition of this segment to the Interstate Highway System. The route was finally signed as I-73 and I-74 in late 2013.

I-73/I-74/US 220, near Biscoe

In late 2018, this segment was extended by 2.91 miles (4.68 km), from US 220/Haywood Cemetery Road to a partially completed trumpet interchange on US 220 north of Rockingham. A bypass under construction will extend this stretch to the US 74 bypass south of Rockingham.

Sandhills

The Western Rockingham Bypass, from the US 74/US 74 Bus. interchange to US 220, near Ellerbe, has all right-of-way purchases completed along the proposed route. Construction on a 3.724-mile (5.993 km) section, along US 220 (south of Ellerbe), began in March 2014; with a contracted amount of $49.8 million (equivalent to $63.1 million in 2023), it was completed in April 2018. The remaining sections of the new bypass were scheduled to start construction by late 2017; however, under reprioritization of construction projects announced in 2014, they were first removed from the list of projects to be started through 2024 then had funding restored with a construction date of 2022 in mid-2016. In January 2017, however, the project, though still funded, was delayed four years due to a low score in prioritizing projects for the 2018–2027 NCDOT State Transportation Improvement Program. On January 9, 2019, it was announced that the North Carolina State Transportation Improvement Program for 2020 to 2029 included connecting I-73 with US 74 six years sooner than planned. A $146.1-million (equivalent to $172 million in 2023) contract was awarded for the 7.2 miles (11.6 km) of four-lane freeway with "substantial completion" by late 2023. As of March 2022, the completion date was 2024.

Future I-73 ends near the NC 38 exit where it is planned to be routed south into South Carolina. Future I-74 continues to the end of the freeway. Between Hamlet and Laurinburg is an at-grade expressway that will eventually be converted to Interstate standards. At Laurinburg, I-74 is to use the Laurinburg Bypass that was at the standard North Carolina freeway grade and signed as I-74 in 2008; however, the North Carolina Department of Transportation (NCDOT) had to remove the signage the following year when the FHWA ruled against using them until the freeway was up to Interstate standards.

The third section of I-74 is officially named the American Indian Highway; completed in 2008, this 19-mile (31 km) section stretches from Maxton to south of Lumberton, connecting with I-95/US 301. After NC 41, I-74 ends for the final time as the highway continues on as an at-grade expressway signed as US 74/Future I-74 Corridor.

East of I-95

I-74/US 74 near the intersection with I-95 in Lumberton

Future I-74 is to continue to follow US 74, going through the city of Whiteville and bypassing the town of Lake Waccamaw. While there are no funded projects to convert the entire highway to Interstate standards, NCDOT is funding several smaller projects to replace intersections with interchanges for several of the remaining cross streets, including for NC 72/NC 130 north of Boardman and replacing other intersections with grade separations, such as with Old US 74 near Evergreen. Before the town of Bolton, it will separate from US 74 onto a proposed new freeway toward Shallotte, then go west on the proposed extension of South Carolina Highway 31 (SC 31; Carolina Bays Parkway) into South Carolina. This entire section of I-74 is still under a feasibility study with several possible routing options; it thus may take years before reaching South Carolina. Current NCDOT plans suggest that construction may not begin until after 2020 and that this will likely be the last section of I-74 to be completed.

Construction of the Old Boardman Road interchange in March 2023

An interchange at Boardman Road began construction on May 25, 2021, and is scheduled for completion in 2024. Two intersections at NC 72 and at NC 130 are planned to be converted into a single interchange and that project is scheduled to begin February 2023. A third and fourth project, now combined, will build an interchange at Chauncey Town Road (SR 1735) and an overpass at Old Lake Road (SR 1740). Those projects were contracted on June 21, 2022, for an estimated cost of $44 million. This would almost build a completed freeway to the NC 211 interchange in Bolton with one exception: the at-grade intersection at US 74/Creek Road (SR 2225) will be converted to an overpass in 2025 according to the NCDOT 2020–2029 STIP.

Alternate names

Though the highway is commonly known as I-74 throughout the state, the highway does have other known names it uses locally in areas.

• American Indian Highway—official name of the 19-mile (31 km) section of I-74 in Robeson County (milemarkers 191–213). It is named to honor the large American Indian population in Robeson County.
• Blue Star Memorial Highway—unofficial North Carolina honorary name of I-74 in Randolph County (dedicated on June 7, 2013).
• High Point East Belt—road name in Guilford County.

History

ISTEA initially authorized the new high priority transportation corridor 5, tentatively known as I-73, to travel from Michigan to South Carolina. Because of several disputes to the routing, a compromise was reached in 1995, by Senator John Warner and Senator Lauch Faircloth, that extended I-74 from its then current eastern terminus of Cincinnati to overlap I-73. (Original plans called for I-73 to run through Winston-Salem and Mount Airy, but, when its alignment was shifted to serve Greensboro, North Carolina, instead, this compromise resulted in I-74 using the Winston-Salem to Mount Airy route.) In Virginia, I-74 would follow I-77 into North Carolina, while I-73 would go east to Roanoke then south along US 220 toward Greensboro. However, when I-73 crossed a border between two states, the federal law authorizing the road required that the two states agree that their sections meet. Originally, both Carolinas selected a route running south from Rockingham. North Carolina had more money to spend on roads, though, and, on May 10, 1995, the US Senate Committee on Environment and Public Works approved North Carolina's plan for I-73 to run eastward to the coast and enter South Carolina at North Myrtle Beach, South Carolina. Another compromise, between Faircloth and Senator Strom Thurmond, agreed to have both Interstates enter South Carolina: I-73 south of Rockingham and I-74 south of Wilmington, North Carolina. After later amendments and the 1998 Transportation Equity Act for the 21st Century (TEA-21), on July 25, 1998, the American Association of State Highway and Transportation Officials (AASHTO) accepted I-73/I-74 into the Interstate Highway System within the states of South Carolina, North Carolina, and Virginia.

I-74/I-77 near Pine Ridge

The 12.6-mile (20.3 km) portion from south of Steeds north to south of Ulah was completed August 27, 1996, and was the first road marked as I-74 (and I-73). Future signage was also installed north to the Greensboro area. The remainder of the 26 miles (42 km) of existing and new freeway between Ulah and Candor was also signed as I-73/I-74 along US 220. In 1998, NC 752, a freeway spur of I-77 was renumbered as the segment of completed I-74, from I-77 to US 601. On June 30, 1999, the freeway was extended an additional five miles (8.0 km) to US 52, south of Mount Airy. In April 2001, I-74 was overlapped with I-77 from the Virginia state line to exit 101.

In January 2008, a 16.8-mile (27.0 km) section of freeway was completed from Candor to Ellerbe; however, it was signed Future I-73/I-74. On November 22, 2010, a 14-mile (23 km) section (known as the East Belt) was added between North Main Street in High Point to Cedar Square Road near Glenola. This also includes the 6.4-mile (10.3 km) section of new freeway that opened between I-85 Business Cedar Square Road. On October 4, 2012, I-74 was extended west from High Point to I-40, in Winston-Salem.

On June 7, 2013, I-74 extended eight miles (13 km) east onto new primary routing from Cedar Square Road to I-73/US 220, near Randleman. Continuing in concurrency with I-73/US 220, it now connects two segments of the Interstate from Winston-Salem to Candor.

American Indian Highway and Laurinburg Bypass

On September 26, 2008, a 19-mile (31 km) section of I-74/US 74 was opened between Maxton to NC 41 near Lumberton, known as the American Indian Highway. The Laurinburg Bypass was also resigned I-74/US 74 at the same time. By the middle of the following year, the Laurinburg Bypass was removed of its I-74 designation by NCDOT after a ruling from the FHWA (it was resigned as a Future I-74 Corridor). The reason was that the section, though a freeway by North Carolina standards, it was not up to Interstate standards. It was also at this same time that NCDOT fixed an exit number error along milemarkers 181 to 191.

North Carolina Highway 752

North Carolina Highway 752
Location	Pine Ridge
Length	1.0 mi (1.6 km)
Existed	1994–1998

North Carolina Highway 752 (NC 752) was the designation of the four-lane limited-access highway that traversed from I-77 to NC 89, near Pine Ridge. Established in 1994, it was a one-mile (1.6 km) freeway spur. In 1998, the freeway was extended to US 601 and was renumbered as I-74. Its short four-year existence was simply to be a placeholder for I-74.

Future

Pilot Mountain Parkway

Currently, three segments are proposed to be part of I-74 in the future. The first corridor is from Mount Airy to Rural Hall, where US 52 is planned to be converted to Interstate standards. The second is a proposed new freeway in Columbus and Brunswick counties would traverse from Whiteville to SC 31 in South Carolina. The section of US 74 from the Rockingham–Hamlet Bypass to the Laurinburg Bypass is also planned to be converted to Interstate standards. However, all of these projects are currently flagged "Scheduled for Reprioritization", with no estimated cost or date established.

Winston-Salem Northern Beltway

Main article: Winston-Salem Northern Beltway

North Carolina Highway 74
Location	Winston-Salem
Length	12.5 mi (20.1 km)
Existed	2020–present

The Winston-Salem Northern Beltway is an under construction freeway loop around the North Carolina city of Winston-Salem. The western section has been designated as NC 452, which will later become I-274 when completed, and the eastern section of the beltway is designated as NC 74, which will later become part of I-74 when completed.

On September 7, 2011, North Carolina Governor Bev Perdue announced that construction of a part of the eastern leg of the beltway would begin in 2014. The section to be built connects US 158 to I-40 Bus. (now US 421/Salem Parkway). Right-of-way acquisition began in 2012 and cost $34 million (equivalent to $44.6 million in 2023); construction was estimated to cost $156 million (equivalent to $205 million in 2023). Construction on the segment, Project U-2579B, commenced in December 2014, with an anticipated completion date of November 2018. However, after delays, including an opening date of late 2019, it was finally opened to traffic on September 5, 2020.

Since then, funding has been allocated to complete the remaining sections of NC 74 between US 52 and the current I-74 (formerly cosigned with US 311), starting with the segment between US 311 and US 158, known as Project U-2579C, in October 2017. Construction on this segment began in 2018; this section has since opened to traffic effective December 23, 2020.

That same year, a contract for the segment between NC 66 and US 311, Projects U-2579D, U-2579E, and U-2579F, was awarded. Actual construction began April 2019 and opened to traffic on November 7, 2022. Next, construction on the segments between I-74 and US 421/Salem Parkway, Projects U-2579AA and U-2579AB, are scheduled to begin in 2020 and will open in 2024. Construction on the interchange with US 52, which began in 2019, is scheduled to be completed in mid-2023.

Rockingham Bypass

Construction of the Rockingham Bypass in March 2023

A western bypass of Rockingham is planned, beginning at the partially-built trumpet interchange with US 220 where I-73 and I-74 currently end and running southwest to the trumpet interchange between US 74 and US 74 Bus., which will be reconfigured to accommodate the new bypass. Construction was initially scheduled for 2026 but was rescheduled for late 2019 and was planned to last three years, costing $146.1 million; however, it is still under construction as of April 2023. Upon completion of the bypass, I-74 will be designated along its length and along US 74 around Rockingham and Hamlet, terminating east of Hamlet at US 74 Bus. The bypass will also carry I-73, which will terminate at the interchange with US 74 west of Rockingham until the section of I-73 extending into South Carolina is completed.

Exit list

County	Location	mi	km	Exit	Destinations	Notes
Surry	​	0.0	0.0		I-77 north – Wytheville	Western terminus of I-74 at the Virginia state line
	Pine Ridge	5.0	8.0	5	I-77 south – Statesville	South end of I-77 overlap
		5.6	9.0	6	NC 89 – Mount Airy
	​	7.8	12.6	8	Red Brush Road
	Mount Airy	11.0	17.7	11	US 601 – Mount Airy, Dobson
		13.0	20.9	13	Park Drive
		17.0	27.4	17	US 52 north – Mount Airy
				Route transition from I-74 to Future I-74
	​			20	Cook School Road	Existing interchanges of US 52 (conversion to Interstate standards, unfunded)
	​			21	West Main Street – Pilot Mountain
	Pilot Mountain			23	NC 268 – Pilot Mountain, Elkin
	​			26	Pilot Knob Park Road – Pilot Mountain State Park
Stokes	​			28	Perch Road – Pinnacle
Forsyth	King			33	South Main Street – King, Tobaccoville
				34	Moore-RJR Drive
	Rural Hall			37	Westinghouse Road
				41B	NC 65 – Rural Hall, Bethania	Completed October 2019 (preliminary work for Northern Beltway project)
	Bethania			41A	US 52 south – Winston-Salem	Under construction (completion rescheduled to July 2023)
	Winston-Salem			42	NC 66 (University Parkway)	Segment currently designated as NC 74, opened on November 7, 2022
				43	NC 8 (Germanton Road)
				45	Baux Mountain Road
	Walkertown			49	US 311 (New Walkertown Road)	Segment currently designated as NC 74, opened on December 23, 2020
				50	US 158 (Reidsville Road)	Segment currently designated as NC 74, opened on September 5, 2020
	Kernersville			53	US 421 / NC 150 (Salem Parkway)
	​			55	Kernersville Road	Under construction as of April 4, 2022 (contract awarded December 2021; scheduled completion in November 2026)
	Winston-Salem			56	I-40 – Statesville, Greensboro
		55.2	88.8	Route transition from Future I-74 to I-74
				55	I-40 – Statesville, Greensboro	Temporary designation of I-74, future NC 192
		56.6	91.1	56	Ridgewood Road
	Union Cross	58.0	93.3	58	NC 192 west – Winston-Salem	Future interchange (contract let October 2022; also scheduled for completion in November 2026)
		58.9	94.8	59	Union Cross Road
	​	60.3	97.0	60	High Point Road
	Horneytown	63.0	101.4	63	NC 66 – Kernersville
Guilford	High Point	65.0	104.6	65	North Main Street
		66.4	106.9	66	Johnson Street
		67.4	108.5	67	NC 68 (Eastchester Drive) – High Point, Greensboro	To Piedmont Triad International Airport and High Point University
		69.0	111.0	69	Greensboro Road
		70.3	113.1	70	Martin Luther King Jr. Drive	Formerly named Kivett Drive
		71.1	114.4	71A	East Green Drive
		71.7	115.4	71B	I-85 BL / US 29 / US 70 – Thomasville, Greensboro
	Archdale	75.2	121.0	75	I-85 – Charlotte, Greensboro
Randolph	Glenola	79.4	127.8	79	Cedar Square Road
	Sophia	84.0	135.2	84	Old US Highway 311
	Randleman	86.8	139.7	86	I-73 north / US 220 north – Greensboro	North end of I-73/US 220 overlap; eastbound left exit
	Asheboro	87.9	141.5	79	Pineview Street
		89.3	143.7	77	Spero Road
		90.7	146.0	76	To US 220 Bus. north / North Fayetteville Street / Vision Drive
		91.5	147.3	75	Presnell Street
		92.4	148.7	74	NC 42 – Asheboro	Left exit; western terminus of NC 42
		94.0	151.3	72 A-B	A: US 64 Bus. east / NC 49 north – Raleigh B: US 64 Bus. west / NC 49 south – Lexington, Charlotte	To North Carolina Zoo
		95.1	153.0	71	McDowell Road
	​			70	US 64 – Raleigh, Lexington
	​	98.7	158.8	68	US 220 Bus. north / NC 134 south – Ulah, Troy	To US 220 Alt
	​	100.9	162.4	65	New Hope Church Road	To North Carolina Zoo
	Seagrove	105.1	169.1	61	NC 705 – Seagrove, Robbins
	​	108.4	174.5	58	Black Ankle Road
Montgomery	Ether	111.1	178.8	56	US 220 Alt. – Ether, Steeds
	Star	114.2	183.8	52	Spies Road – Star, Robbins
	Biscoe	117.4	188.9	49	NC 24 / NC 27 – Biscoe, Carthage, Troy
	Candor	122.4	197.0	44	NC 211 – Candor, Pinehurst
	Emery	125.5	202.0	41	US 220 south / US 220 Alt. north – Candor	South end of US 220 overlap
	​	127.4	205.0	39	Tabernacle Church Road
Richmond	Norman	131.4	211.5	35	Moore Street – Norman
	​	133.2	214.4	33	NC 73 – Windblow, Plainview
	​	136.5	219.7	30	Haywood Parker Road
	Ellerbe	138.8	223.4	28	To NC 73 west / Millstone Road
	​	141.5	227.7	25	US 220 north – Ellerbe
	​			23	Dockery Road / Haywood Cemetery Road
	​			22	I-73 end / US 220 south – Rockingham	Partial interchange (rest to be constructed by 2023)
	​			Route transition from I-74 to Future I-74
	​			20	Cartledge Creek Road	Future interchange to be built as part of Rockingham Bypass project
	​			16	US 74 west / US 74 Bus. east – Wadesboro, Rockingham	Future interchange (funded)
	​			15	Galestown Road – Cordova	Existing interchanges of US 74
	​				US 1 to US 220 – Rockingham, Southern Pines, Cheraw
	​				NC 177 – Hamlet, Cheraw
	​				NC 38 – Bennettsville
	​				I-73 south – Bennettsville	Future interchange (unfunded)
	​				NC 381 – Hamlet, Gibson	Existing interchanges of US 74
	​				US 74 Bus. west – Hamlet
Scotland	Laurel Hill				NC 144 east (Old Wire Road) – Wagram	Existing interchanges of US 74 (conversion to Interstate standards, unfunded)
	​	180.4	290.3	181	US 74 Bus. – Laurinburg
	​	181.2	291.6	182	NC 79 – Laurinburg, Gibson
	Laurinburg	182.8	294.2	183	US 15 / US 401 / US 501 north – Fayetteville, Aberdeen, Bennettsville	Existing interchanges of US 74 / US 501 (conversion to Interstate standards, unfunded)
		183.2	294.8	184	US 15 Bus. / US 401 Bus. – Laurinburg
		184.1	296.3	185	US 501 south – Rowland, Myrtle Beach
	​	185.8	299.0	186	To US 74 Bus. (Highland Road) – Laurinburg	Existing interchanges of US 74 (conversion to Interstate standards, unfunded)
	​	186.6	300.3	187	US 74 Bus. – Laurinburg, Maxton
	​	189.4	304.8	190	Airport Road – Laurinburg–Maxton Airport, Maxton
Robeson	Maxton	190.8	307.1	191	NC 71 – Maxton, Red Springs
		194.0	312.2	Route transition from Future I-74 to I-74
				194	US 74 Alt. east / US 74 Bus. west – Maxton	Signed as 194A (west) and 194B (east)
	​	197.0	317.0	197	Cabinet Shop Road
	​	200.7	323.0	200	NC 710 – Pembroke, Red Springs
	​	203.9	328.1	203	Dew Road – Pembroke
	​	207.9	334.6	207	Back Swamp Road
	Lumberton	209.3	336.8	209	I-95 / US 301 – Lumberton, Fayetteville, Florence	Signed as 209A (south) and 209B (north)
		210.5	338.8	210	US 74 Alt. west
		213.1	343.0	213	NC 41 – Lumberton, Fairmont
		213.6	343.8	Route transition from I-74 to Future I-74
	​	219.4	353.1	219	Broadridge Road (SR 2220)	Completed November 2019; not currently signed as I-74
	​			223	NC 72 west / NC 130 west – Lumberton, Fairmont	Project contract let March 1, 2023; construction to start May 2023
Columbus	Boardman			225	Old Boardman Road (SR 1506)	Contract awarded April 20, 2021; interchange construction has started effective May 25, 2021 (completion scheduled for February 2025)
	Evergreen	228.9	368.4	228	NC 242 (Haynes Lennon Highway) – Bladenboro, Cerro Gordo	Current interchanges of US 74 (conversion to Interstate standards, unfunded)
	Chadbourn	233.7	376.1	233	US 74 Bus. east / NC 130 east / NC 410 – Chadbourn, Bladenboro
		235.7	379.3	235	US 76 west – Chadbourn, Fair Bluff	Existing interchanges of US 74 / US 76 (conversion to Interstate standards, unfunded)
	​	238.5	383.8	238	Union Valley Road
	Whiteville	241.4	388.5	241	US 701 – Whiteville, Clarkton
		244.3	393.2	244	US 74 Bus. / US 76 Bus. west to NC 214 east – Whiteville, Lake Waccamaw
	Hallsboro	248.0	399.1	248	Hallsboro Road (SR 1001)	Opened to traffic June 12, 2020; not currently signed as I-74
	Lake Waccamaw	252.4	406.2	252	Chauncey Town Road (SR 1735)	Roundabout interchange; contract awarded on July 11, 2022; interchange construction will start effective August 2022 (completion scheduled for mid-2025)
	Proposed Interstate 74 corridor from US 74/US 76 to US 17/South Carolina state line via Brunswick County (route unconfirmed)
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Concurrency terminus       Incomplete access       Route transition       Unopened

External links

• Media related to Interstate 74 in North Carolina at Wikimedia Commons