Template:NSWint

LGA	Location	km	mi	Destinations	Notes
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Template documentation[view] [edit] [history] [purge]

This is a template for generating an intersection or exit for a New South Wales road article. It is a member of the {{Jctint}} suite of templates.

General usage

This is the basic syntax you need to get a complete intersection table. Just copy and paste the code below:

{{AUSinttop}}
{{NSWint
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

...and fill in the variables! For more entries, use this:

{{NSWint
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Within a single LGA

If a road is entirely within a single local government area, you may omit the LGA column by using the following code:

{{AUSinttop|noLGA=yes}}
{{NSWint
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

Just copy and paste the above code, and fill in the variables! Also note that the table should be preceded by line explaining the omitted column, such as:

The entire freeway is in the [[w:City of Mitcham|City of Mitcham]].

For more entries, use this:

{{NSWint
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Parameters

For the above parameters, here's what you should fill in:

• LGA: The name of the local government area in which the intersection is located. Full wiki markup is required, for example |LGA=[[w:City of Mitcham|Mitcham]]. Parameters such as LGAC can be used instead to avoid using full wiki markup (see below)
• LGAspan: number of rows the LGA spans. If value=1, omit this parameter. If set, LGA (or LGAC etc.) should be omitted from the other rows it spans.
• location: the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, New South Wales, so if the intersection is in multiple suburbs, you must use location_special (see below).
• lspan: number of rows the location spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans
• type: use to specify a shading for that intersection's row. The permitted types are:
  • closed: for highway intersections or interchanges that are now closed to traffic
  • mplex or concur: for a route multiplexing terminus or concurrencies.
  • trans: for a route transition – from one route number to either another route number, or a section without a route number, along a named road
  • unbuilt: for unbuilt roadway intersections/interchanges.
  • incomplete: for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.)
  • hov for interchanges that are only for High occupancy vehicle lanes
  • toll or etc for an interchange where tolls or electronic tolls are collected
  • Note: If the type parameter is used, the table must include a colour key at the bottom of the table. Use the |keys= parameter in {{jctbtm}} to generate a compliant legend.
• km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres (see below)
• road: road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations>
  • Generate route shields using {{AUshield}}
  • If there are multiple roads (i.e. intersecting road changes name at this intersection), use a slash (/) to separate roads
  • Generate an ndash (–) and wikilinked destinations using {{NSWcity}}
  • If destinations are to be entered manually, an ndash can be generated by the HTML character code –
• notes: any notes regarding that junction. This must include an explanation for any usage of the type-generated shading.

Additional Parameters

In addition to those in the basic syntax, the following parameters may be used:

• LGA_note: a note that appears in small text below the LGA
• location_special: (replaces location) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup. {{SAcity}}, {{VICcity}} etc. are a useful shorthand.
• km2: use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route.
• uspan: number of rows the units spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans.
• rcspan: number of columns the road cell spans-if value=1, omit this parameter. Set |rcspan=2 to generate a left aligned cell that spans both the destination and notes column. Do not use for features such as a rivers and bridges - see place below. Important: if using this parameter, set |notes=none to avoid the notes cell spilling over the edge of the table.
• nspan: number of rows the notes spans—if value=1, omit this parameter. If set, notes should be omitted from the other rows it spans.
• place or bridge or tunnel: a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text.
• pspan or bspan or tspan: number of rows the above multicolumn cell spans-if value=1, omit this parameter.
• Parameters that replace LGA: The parameters in the table below allow you to enter the LGA name as plain text, and the template will generate the necessary piped link. For example, |LGAC=Mitcham will generate  Mitcham , which links to the Wikipedia article City of Mitcham

Parameter	Type of LGA (name of article on Wikipedia)
LGAC	"City of <name>"
LGA-C	"<name> City"
LGARC	"Rural City of <name>"
LGA-Co	"<name> Council"
LGADC	"District Council of <name>"
LGA-DC	"<name> District Council"
LGAM	"Municipality of <name>"
LGA-M	"<name> Municipality"
LGA-R	"<name> Region"
LGAS	"Shire of <name>"
LGA-S	"<name> Shire"
LGAAS	"Aboriginal Shire of <name>"
LGAT	"Town of <name>"

Any parameter which is empty can be omitted.

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:NSWint in articles based on its TemplateData. TemplateData for NSWint <templatedata> { "description": "A template for making intersection tables.", "params": { "1": { "label": "Exit number columns", "description": "For an exit number column, set to \"exit\". For exit number and old exit number columns, set to \"old\"" }, "sspan": { "label": "State-cell span", "description": "Number of rows that the state cell spans, for interstate routes. For routes within a single state/territory, do not use this parameter" }, "LGAspan": { "description": "Number of rows the LGA cell spans. If value=1, omit this parameter. If set, LGA (or LGAC etc) parameters should be omitted from the other rows it spans.", "type": "number", "default": "", "label": "LGA-cell span" }, "LGA": { "description": "The name of the local government area in which the intersection is located. Full wiki markup is required, for example: Mitcham", "type": "string", "required": true, "suggested": true, "label": "Local government area" }, "LGAC": { "label": "Local government area - City of ____", "description": "Name of the local government area, when the name is of the form \"City of NAME\"" }, "LGA-C": { "label": "Local government area - ____ City", "description": "Name of the local government area, when the name is of the form \"NAME City\"" }, "LGARC": { "label": "Local government area - Rural City of ____", "description": "Name of the local government area, when the name is of the form \"Rural City of NAME\"" }, "LGA-Co": { "label": "Local government area - ____ Council", "description": "Name of the local government area, when the name is of the form \"NAME Council\"" }, "LGADC": { "label": "Local government area - District Council of ____", "description": "Name of the local government area, when the name is of the form \"District Council of NAME\"" }, "LGA-DC": { "label": "Local government area - ____ District Council", "description": "Name of the local government area, when the name is of the form \"NAME District Council\"" }, "LGAM": { "label": "Local government area - Municipality of ____", "description": "Name of the local government area, when the name is of the form \"Municipality of NAME\"" }, "LGA-M": { "label": "Local government area - ____ Municipality", "description": "Name of the local government area, when the name is of the form \"NAME Municipality\"" }, "LGA-R": { "label": "Local government area - ____ Region", "description": "Name of the local government area, when the name is of the form \"NAME Region\"" }, "LGAS": { "label": "Local government area - Shire of ____", "description": "Name of the local government area, when the name is of the form \"Shire of NAME\"" }, "LGA-S": { "label": "Local government area - ____ Shire", "description": "Name of the local government area, when the name is of the form \"NAME Shire\"" }, "LGAAS": { "label": "Local government area - Aboriginal Shire of ____", "description": "Name of the local government area, when the name is of the form \"Aboriginal Shire of NAME\"" }, "LGAT": { "label": "Local government area - Town of ____", "description": "Name of the local government area, when the name is of the form \"Town of NAME\"" }, "LGA_note": { "description": "A note that appears in small text below the LGA" }, "location": { "description": "the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, <state>, so if the intersection is in multiple suburbs, you must use the \"location_special\" parameter", "type": "string", "suggested": true }, "location_special": { "description": "(replaces \"location\" parameter) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup." }, "lspan": { "description": "number of rows the location cell spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans", "type": "string" }, "lcspan": { "description": "number of columns the location cell spans—if value=1, omit this parameter. If set, LGA and/or state cells should be omitted from this rows" }, "lcalign": { "description": "Alignment of the location cell, if \"lcspan\" parameter is used. Can be set to \"left\", \"right\", or \"center\"" }, "type": { "description": "use to specify a shading for the intersection's row. The permitted types are: \"closed\" for highway intersections or interchanges that are now closed to traffic; \"concur\" for a route concurrency terminus; \"trans\" for a route transition – from one route number to either another route number, or a section without a route number, along a named road; \"unbuilt\" for unbuilt roadway intersections/interchanges; \"incomplete\" for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.); \"hov\" for interchanges that are only for High occupancy vehicle lanes; \"toll\" or \"etc\" for an interchange where tolls or electronic tolls are collected" }, "unit": {}, "km": { "description": "km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres", "type": "number", "suggested": true }, "km2": { "description": "use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route", "type": "number" }, "uspan": { "label": "units-cells span", "description": "number of rows the units cells spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans." }, "old": { "description": "Old exit number" }, "ospan": { "description": "number of rows the old exit number spans—if value=1, omit this parameter. If set, \"old\" parameter should be omitted from the other rows it spans" }, "exit": { "description": "Exit number" }, "espan": { "description": "number of rows the exit number spans—if value=1, omit this parameter. If set, \"exit\" parameter should be omitted from the other rows it spans" }, "road": { "description": "road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations> ; Generate route shields using {{AUshield}; If there are multiple roads (ie intersecting road changes name at this intersection), use a slash (/) to separate roads; Generate an ndash (–) and wikilinked destinations using [[w:{{{1}}}, Australian Capital Territory|{{{1}}}]], [[w:{{{1}}}, New South Wales|{{{1}}}]], [[w:{{{1}}}, Victoria|{{{1}}}]] etc; If destinations are to be entered manually, an ndash can be generated by the HTML character code –", "type": "string", "required": true, "suggested": true }, "rspan": { "description": "number of rows the road cell spans—if value=1, omit this parameter" }, "rcspan": { "description": "number of columns the road cell spans—if value=1, omit this parameter. if using this parameter, set the \"notes\" parameter to \"none\" to avoid the notes cell spilling over the edge of the table." }, "notes": { "description": "any notes regarding that junction. This must include an explanation for any usage of the type-generated shading.", "suggested": true }, "nspan": { "description": "number of rows the notes spans—if value=1, omit this parameter. If set, the \"notes\" parameter should be omitted from the other rows it spans." }, "place": { "aliases": [ "bridge", "tunnel" ], "description": "a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text." }, "pspan": { "aliases": [ "bspan", "tspan" ], "description": "number of rows the place/bridge/tunnel multicolumn cell spans—if value=1, omit this parameter." } } } </templatedata>

See also

• {{jctname}}, {{AUshield}} and {{WAcity}}, are templates used to generate route shields and wikilinked destinations
• {{AUSinttop}}, a template that generates a MOS:RJL-compliant header for the junction list
• {{jctbtm}}, a template that closes the junction list table
• {{jcttop}}, {{CTint}}, {{ILint}}, {{INint}}, {{MIint}}, {{MNint}}, {{NHint}}, {{NYint}}, {{OHint}}, {{PAint}}, {{VTint}}, {{WIint}} are other templates in the {{Jctint}} suite, used in American road junction lists
• {{jctbridge}}, a template that generates rows for bridge crossings
• {{jctco}}, a template that generates rows for counties without junctions
• {{jctgap}}, a template for generating a row for a gap in the route
• {{jcttunnel}}, a template that generates rows for tunnel crossings
• {{jctrestarea}}, a template that generates rows for rest areas, service areas and the like

The above documentation is transcluded from Template:AUSintcore/doc. (edit | history)
Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages.
Subpages of this template.