Template:Infobox bridge/doc

Sydney Harbour Bridge
Sydney Harbour Bridge
Coordinates	33°51′8″S 151°12′38″E / 33.85222°S 151.21056°E
Carries	Trains, Motor vehicles, pedestrians and bicycles
Crosses	Port Jackson
Locale	Sydney, New South Wales, Australia
Characteristics
Design	Through arch bridge
Total length	1,149 m (3,770 ft)
Width	49 m (161 ft)
Height	134 m (440 ft)
Longest span	503 m (1,650 ft)
Clearance below	49 m (161 ft) at mid-span
History
Construction start	28 July 1923
Construction end	19 January 1932
Opened	19 March 1932

Using location map
Using location map
Coordinates	0°N 0°E / 0°N 0°E
	{{{extra}}}

{{{name}}}

{{{native_name}}}
{{{name}}}; {{{native_name}}}
	[[File:{{{image}}}\|{{{image_size}}}\|alt={{{alt}}}\|upright={{{image_upright}}}]] {{{caption}}}
Coordinates	0°N 0°E / 0°N 0°E
OS grid reference	{{{os_grid_reference}}}
Carries	{{{carries}}}
Crosses	{{{crosses}}}
Locale	{{{locale}}}
Begins	{{{starts}}}
Ends	{{{ends}}}
Official name	{{{official_name}}}
Other name(s)	{{{other_name}}}
Named for	{{{named_for}}}
Owner	{{{owner}}}
Maintained by	{{{maint}}}
Heritage status	{{{heritage}}}
{{{id_type}}}	{{{id}}}
Website	{{{website}}}
Preceded by	{{{preceded}}}
Followed by	{{{followed}}}
Characteristics
Design	{{{design}}}
Material	{{{material}}}
Trough construction	{{{material1}}}
Pier construction	{{{material2}}}
Total length	{{{length}}}
Width	{{{width}}}
Height	{{{height}}}
Water depth	{{{depth}}}
Traversable?	{{{traversable}}}
Towpaths	{{{towpath}}}
Longest span	{{{mainspan}}}
No. of spans	{{{number_spans}}}
Piers in water	{{{piers_in_water}}}
Load limit	{{{load}}}
Clearance above	{{{clearance_above}}}
Clearance below	{{{clearance_below}}}
No. of lanes	{{{lanes}}}
Design life	{{{life}}}
Diameter	{{{diameter}}}
First section length	{{{first_length}}}
First section diameter	{{{first_diameter}}}
Second section length	{{{second_length}}}
Second section diameter	{{{second_diameter}}}
Third section length	{{{third_length}}}
Third section diameter	{{{third_diameter}}}
Capacity	{{{capacity}}}
History
Architect	{{{architect}}}
Designer	{{{designer}}}
Contracted lead designer	{{{contracted_designer}}}
Successful competition design	{{{winner}}}
Engineering design by	{{{engineering}}}
Constructed by	{{{builder}}}
Fabrication by	{{{fabricator}}}
Built	{{{built}}}
Construction start	{{{begin}}}
Construction end	{{{complete}}}
Construction cost	{{{cost}}}
Opened	{{{opened}}}
Inaugurated	{{{inaugurated}}}
Rebuilt	{{{rebuilt}}}
Collapsed	{{{collapsed}}}
Destroyed	{{{destroyed}}}
Closed	{{{closed}}}
Demolished	{{{demolished}}}
Replaces	{{{replaces}}}
Replaced by	{{{replaced_by}}}
Statistics
Daily traffic	{{{traffic}}}
Toll	{{{toll}}}
	{{{extra}}}
References
	{{{references}}}

This is a documentation subpage for Template:Infobox bridge.
It may contain usage information, categories and other content that is not part of the original template page.

This template uses Lua:

This template is used on many pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them.

Usage

Copy and paste the template below:

{{Infobox bridge
| name                = 
| native_name         = 
| native_name_lang    = 
| image               = 
| image_size          =
| image_upright       = 
| alt                 = 
| caption             = 
| coordinates         = <!-- {{Coord}} -->
| os_grid_reference   = 
| fetchwikidata       =
| onlysourced         =
| carries             = 
| crosses             = 
| locale              = 
| starts              = 
| ends                = 
| official_name       = 
| other_name          = 
| named_for           = 
| owner               = 
| maint               = 
| heritage            = 
| id                  = 
| id_type             = 
| website             = 
| preceded            = <!-- or |upstream= -->
| followed            = <!-- or |downstream= -->
| design              = 
| material            = 
| material1           = 
| material2           = 
| length              = 
| width               = 
| height              = 
| depth               = 
| traversable         = 
| towpath             = 
| mainspan            = 
| number_spans        = 
| piers_in_water      = 
| load                = 
| clearance_above     = 
| clearance_below     = 
| lanes               = 
| life                = 
| diameter            =
| first_length        = 
| first_diameter      = 
| second_length       = 
| second_diameter     = 
| third_length        = 
| third_diameter      = 
| capacity            = 
| num_track           = 
| track_gauge         = 
| structure_gauge     = 
| electrification     = 
| architect           = 
| designer            = 
| contracted_designer = 
| winner              = 
| engineering         = 
| builder             = 
| fabricator          = 
| built               =
| begin               = 
| complete            = 
| cost                = 
| opened              = <!-- or |opening= |open= -->
| inaugurated         = <!-- or |dedicated= -->
| rebuilt             = 
| collapsed           = 
| destroyed           =
| closed              = 
| demolished          =
| replaces            = 
| replaced_by         = 
| traffic             = 
| toll                = 
| extra               = <!-- extra = module = embed = -->
| references          =
}}

Parameters

name: Name of bridge
native_name: Name of the bridge in the local language, if different
native_name_lang: ISO code for the local language (e.g. "fr" for French). If more than one, enter the native names using {{Lang}} instead.
image: Filename of image of the bridge
image_upright: Scaling value, where the default size is 1
alt: Alt text for bridge image (see WP:ALT)
caption: Text for caption beneath image
coordinates: Latitude and longitude. Use {{Coord}}. A typical four-lane bridge (25 m or 82.02 ft wide) requires 0.1 second or 0.0001° of precision.
os_grid_reference: OS grid reference
carries: Type of vehicles bridge carries
crosses: Body of water or geographic feature that is being crossed
locale: General area where located (e.g. San Francisco, Indiana-Kentucky State Line)
starts: Where the aqueduct starts
ends: Where the aqueduct ends
official_name: Official name
other_name: Also known as name
named_for: namesake
owner: Persons or body that owns the bridge
maint: Maintaining entity (e.g. California Department of Transportation)
heritage: Heritage status (e.g. UK listed building)
id: ID number, if available
id_type: Label for the ID field. The default, if this parameter is not specified, is ID number (for the United States National Bridge Inventory)
website: URL to the bridge's website; enclose within {{URL}}
preceded: Name of bridge upstream
followed: Name of bridge downstream
design: Type of bridge (cantilever, truss, suspension)
material: Construction material (concrete, steel, iron, stone, brick, wood)
material1: Construction material for trough
material2: Construction material for piers
length: Length of bridge, w/ conversions
width: Width of bridge, w/ conversions
height: Height of bridge, w/ conversions
depth: Depth of aqueduct channel, w/ conversions
diameter: (if it's pipe)
first_length: length of first section, if segmented
first_diameter: diameter of first section, if segmented
second_length: length of second section, if segmented
second_diameter: diameter of second section, if segmented
third_length: length of third section, if segmented
third_diameter: diameter of third section, if segmented
capacity: rate-of-flow
traversable: Can standard craft (for that navigation) pass on the aqueduct? Yes/No
towpath: Side of towpath (None, N, S, E, W, NE, NW, SE, SW, Both)
mainspan: Length of main span, w/ conversions
number_spans: Number of spans or arches
piers_in_water: Number of piers standing in a river or other water in normal conditions
load: Load limit of the bridge, w/ conversions
clearance_above: Clearance from the bridge deck to any part of the structure across the deck, if low enough to be problematic. Some bridges are clear above the deck.
clearance_below: Clearance beneath the bridge
life: Design life of the bridge in years
architect: Those responsible for the conceptual design of the bridge – to be used when engineering/construction design was done by another party
designer: Bridge designer/architect (e.g. Isambard Kingdom Brunel)
contracted_designer: The lead designer at the contract/post competition phase
winner: The winner/s of the design competition phase
engineering: The person or organization that did the engineering/construction design, where that differs from 'designer' above
builder: Construction company or bridge builder
fabricator: Steel fabricator
begin: Construction start date
complete: Construction end date
cost: Total project cost
open: Opening date, use {{Start date}}; If the bridge has yet not opened, use |opening=
inaugurated: the date the bridge is ceremonially opened
rebuilt: Date of major rebuild
collapsed: If collapsed, then date of collapse, don't use closed – closure is assumed
closed: Closing date
replaces: The bridge or ferry services that this bridge made redundant
replaced_by: The bridge or structure that replaced this bridge
traffic: Average Daily Traffic value
toll: Price of the toll (if a toll bridge)
extra: Spare field for modules, e.g. {{Infobox designation list}}

Coordinates

Use the coordinates= parameter with {{Coord}} to specify latitude and longitude. See the documentation for the Coord template for details on usage.

Map

Basic parameters:
- mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
- mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
- mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
- mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
- mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
- mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
Customise which features are displayed:
- mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
- mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
- mapframe-line – Turn off display of line feature by setting to none. Default: not specified
- mapframe-geomask – Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P17), P131 for Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P131)). Default: not specified
- mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
  - auto – switch geomasks found in Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P276) and Lua error in Module:Wd at line 621: attempt to index field 'wikibase' (a nil value). (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country.
  - geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
  - zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
Other optional parameters:
- mapframe-frame-width or mapframe-width – Frame width. Default: 270
- mapframe-frame-height or mapframe-height – Frame height. Default: 200
- mapframe-shape-fill – Color used to fill shape features. Default: #606060
- mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
- mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
- mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
- mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: not specified (i.e. blank)
  - Can also be set to blank to override any default marker symbol
- mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
- mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
- mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
- mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
- mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
- mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
- mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
- mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Example

{{Infobox bridge
| name        = Sydney Harbour Bridge
| image       = Sydney Harbour Bridge from Circular Quay.jpg
| carries     = Trains, Motor vehicles, pedestrians and bicycles
| crosses     = [[w:Port Jackson|Port Jackson]]
| locale      = [[w:Sydney|Sydney]], [[w:New South Wales|New South Wales]], Australia
| design      = [[w:Through arch bridge|Through arch bridge]]
| length      = {{Convert|1149|m|ft|0|abbr=on}}
| width       = {{Convert|49|m|ft|0|abbr=on}}
| height      = {{Convert|134|m|ft|0|abbr=on}}
| mainspan    = {{Convert|503|m|ft|0|abbr=on}}
| above       = (?)
| below       = {{Convert|49|m|ft|0|abbr=on}} at mid-span
| begin       = 28 July 1923
| complete    = 19 January 1932
| open        = {{Start-date|19 March 1932}}
| coordinates = {{coord|33|51|8|S|151|12|38|E|region:AU-NSW_type:landmark|display = inline}}
}}

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter. A typical four-lane bridge (25 m or 82.02 ft wide) requires 0.1 second or 0.0001° of precision.

Tracking categories

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox bridge in articles based on its TemplateData.

TemplateData for Infobox bridge

<templatedata> { "params": { "child": {}, "embed": {}, "name": {}, "bridge_name": {}, "aqueduct_name": {}, "native_name": {}, "native_name_lang": {}, "image": { "type": "wiki-file-name" }, "image_size": {}, "image_upright": {}, "alt": {}, "caption": {}, "image_caption": {}, "coordinates": {}, "os_grid_reference": {}, "carries": {}, "crosses": {}, "locale": {}, "location": {}, "official_name": {}, "other_name": {}, "also_known_as": {}, "named_for": {}, "owner": {}, "maint": {}, "maintained": {}, "heritage": {}, "id_type": {}, "id": {}, "website": {}, "preceded": {}, "upstream": {}, "followed": {}, "downstream": {}, "design": {}, "material": {}, "material1": {}, "material2": {}, "length": {}, "width": {}, "height": {}, "depth": {}, "traversable": {}, "passable": {}, "towpath": {}, "mainspan": {}, "number_spans": {}, "spans": {}, "piers_in_water": {}, "pierswater": {}, "load": {}, "clearance_above": {}, "clearance": {}, "clearance_below": {}, "below": {}, "lanes": {}, "life": {}, "num_track": {}, "notrack": {}, "track_gauge": {}, "gauge": {}, "structure_gauge": {}, "electrification": {}, "architect": {}, "designer": {}, "winner": {}, "contracted_designer": {}, "engineering": {}, "builder": {}, "fabricator": {}, "begin": {}, "complete": {}, "cost": {}, "open": {}, "inaugurated": {}, "rebuilt": {}, "collapsed": {}, "closed": {}, "replaces": {}, "replaced_by": {}, "dedicated": {}, "opening": {}, "opened": {}, "traffic": {}, "toll": {}, "extra": {}, "references": {}, "refs": {}, "built": {}, "destroyed": {}, "mapframe": { "label": "Show mapframe map", "description": "Specify yes or no to show or hide the map, overriding the default", "example": "yes", "type": "string", "default": "no", "suggested": true }, "mapframe-caption": { "label": "Mapframe caption", "description": "Caption for the map. If mapframe-geomask is set, then the default is \"Location in <<geomask's label>>\"", "type": "string" }, "mapframe-custom": { "label": "Custom mapframe",

"description": "Use a custom map instead of the automatic mapframe. Specify either a

Map

template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored.",

"type": "wiki-template-name" }, "mapframe-point": { "label": "Mapframe point feature", "description": "Override display of mapframe point feature. Turn off display of point feature by setting to \"none\". Force point marker to be displayed by setting to \"on\"", "type": "string" }, "mapframe-shape": { "label": "Mapframe shape feature", "description": "Override display of mapframe shape feature. Turn off by setting to \"none\". Use an inverse shape (geomask) instead of a regular shape by setting to \"inverse\"", "type": "string" }, "mapframe-frame-width": { "aliases": [ "mapframe-width" ], "label": "Mapframe width", "description": "Frame width in pixels", "type": "number", "default": "270" }, "mapframe-frame-height": { "aliases": [ "mapframe-height" ], "label": "Mapframe height", "description": "Frame height in pixels", "type": "number", "default": "200" }, "mapframe-shape-fill": { "label": "Mapframe shape fill", "description": "Color used to fill shape features", "type": "string", "default": "#606060" }, "mapframe-shape-fill-opacity": { "label": "Mapframe shape fill opacity", "description": "Opacity level of shape fill, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-stroke-color": { "aliases": [ "mapframe-stroke-colour" ], "label": "Mapframe stroke color", "description": "Color of line features, and outlines of shape features", "type": "string", "default": "#ff0000" }, "mapframe-stroke-width": { "label": "Mapframe stroke width", "description": "Width of line features, and outlines of shape features", "type": "number", "default": "5" }, "mapframe-marker": { "label": "Mapframe marker", "description": "Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options", "example": "museum", "type": "string" }, "mapframe-marker-color": { "aliases": [ "mapframe-marker-colour" ], "label": "Mapframe marker color", "description": "Background color for the marker", "type": "string", "default": "#5E74F3" }, "mapframe-geomask": { "label": "Mapframe geomask", "description": "Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity)", "example": "Q100", "type": "wiki-page-name" }, "mapframe-geomask-stroke-color": { "aliases": [ "mapframe-geomask-stroke-colour" ], "label": "Mapframe geomask stroke color", "description": "Color of outline of geomask shape", "type": "string", "default": "#555555" }, "mapframe-geomask-stroke-width": { "label": "Mapframe geomask stroke width", "description": "Width of outline of geomask shape", "type": "number", "default": "2" }, "mapframe-geomask-fill": { "label": "Mapframe geomask fill", "description": "Color used to fill outside geomask features", "type": "string", "default": "#606060" }, "mapframe-geomask-fill-opacity": { "label": "Mapframe geomask fill opacity", "description": "Opacity level of fill outside geomask features, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-zoom": { "label": "Mapframe zoom", "description": "Set the zoom level, from \"1\" to \"18\", used if the zoom level cannot be determined automatically from object length or area", "example": "12", "type": "number", "default": "10" }, "mapframe-length_km": { "label": "Mapframe length (km)", "description": "Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-length_mi": { "label": "Mapframe length (mi)", "description": "Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_km2": { "label": "Mapframe area (km^2)", "description": "Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_mi2": { "label": "Mapframe area (mi^2)", "description": "Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-frame-coordinates": { "aliases": [ "mapframe-frame-coord" ], "label": "Mapframe frame coordinates", "description": "Alternate latitude and longitude coordinates for initial placement of map, using ", "example": "12°21′N 56°43′E / 12.35°N 56.71°E / 12.35; 56.71", "type": "wiki-template-name" }, "mapframe-switcher": { "label": "Mapframe switcher", "description": "Set to \"auto\" or \"geomasks\" or \"zooms\" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between \"zoomed in\"/\"zoomed midway\"/\"zoomed out\", where \"zoomed in\" is the default zoom (with a minimum of 3), \"zoomed out\" is 1, and \"zoomed midway\" is the average.", "type": "string" }, "mapframe-coordinates": { "aliases": [ "mapframe-coord", "coordinates. coord" ], "label": "Mapframe coordinates ", "description": "Coordinates to use, instead of any on Wikidata. Use the template.", "example": "12°20′N 56°47′E / 12.34°N 56.78°E / 12.34; 56.78", "type": "wiki-template-name", "default": "(coordinates from Wikidata)" }, "fetchwikidata": {}, "onlysourced": {}, "coord_format": {}, "starts": {}, "ends": {}, "diameter": {}, "first_length": {}, "first_diameter": {}, "second_length": {}, "second_diameter": {}, "third_length": {}, "third_diameter": {}, "capacity": {}, "demolished": {}, "embedded": {} }, "paramOrder": [ "child", "embed", "name", "bridge_name", "aqueduct_name", "native_name", "native_name_lang", "image", "image_size", "image_upright", "alt", "caption", "image_caption", "coordinates", "os_grid_reference", "carries", "crosses", "locale", "location", "official_name", "other_name", "also_known_as", "named_for", "owner", "maint", "maintained", "heritage", "id_type", "id", "website", "preceded", "upstream", "followed", "downstream", "design", "material", "material1", "material2", "length", "width", "height", "depth", "traversable", "passable", "towpath", "mainspan", "number_spans", "spans", "piers_in_water", "pierswater", "load", "clearance_above", "clearance", "clearance_below", "below", "lanes", "life", "num_track", "notrack", "track_gauge", "gauge", "structure_gauge", "electrification", "architect", "designer", "winner", "contracted_designer", "engineering", "builder", "fabricator", "built", "begin", "complete", "cost", "open", "inaugurated", "rebuilt", "collapsed", "destroyed", "closed", "replaces", "replaced_by", "dedicated", "opening", "opened", "traffic", "toll", "refs", "extra", "references", "mapframe", "mapframe-caption", "mapframe-custom", "mapframe-id", "mapframe-coordinates", "mapframe-wikidata", "mapframe-point", "mapframe-shape", "mapframe-frame-width", "mapframe-frame-height", "mapframe-shape-fill", "mapframe-shape-fill-opacity", "mapframe-stroke-color", "mapframe-stroke-width", "mapframe-marker", "mapframe-marker-color", "mapframe-geomask", "mapframe-geomask-stroke-color", "mapframe-geomask-stroke-width", "mapframe-geomask-fill", "mapframe-geomask-fill-opacity", "mapframe-zoom", "mapframe-length_km", "mapframe-length_mi", "mapframe-area_km2", "mapframe-area_mi2", "mapframe-frame-coordinates", "mapframe-switcher", "fetchwikidata", "onlysourced", "coord_format", "starts", "ends", "diameter", "first_length", "first_diameter", "second_length", "second_diameter", "third_length", "third_diameter", "capacity", "demolished", "embedded" ], "format": "block" } </templatedata>

Template:Infobox bridge/doc

Contents

Usage

Parameters

Coordinates

Map

Example

Microformat

Sub-templates

Classes

Precision

Tracking categories

Navigation menu

Template:Infobox bridge/doc

Usage

Parameters

Coordinates

Map

Example

Microformat

Sub-templates

Classes

Precision

Tracking categories

Navigation menu

Search