Template:Infobox bridge

Infobox bridge

Template documentation[view] [edit] [history] [purge]

Usage

{{{name}}}
[{{{native name}}}] Error: {{native name}}: unrecognized language tag: {{{native name lang}}} (help) (language?)
[[File:{{{image}}}|{{{image_size}}}|alt={{{alt}}}|upright={{{image_upright}}}]] {{{caption}}}
Coordinates	0°N 0°E
Carries	{{{carries}}}
Crosses	{{{crosses}}}
Locale	{{{locale}}}
Begins	{{{starts}}}
Ends	{{{ends}}}
Official name	{{{official_name}}}
Other name(s)	{{{other_name}}}
Named for	{{{named_for}}}
Owner	{{{owner}}}
Maintained by	{{{maint}}}
Heritage status	{{{heritage}}}
{{{id_type}}}	{{{id}}}
Website	{{{website}}}
Preceded by	{{{preceded}}}
Followed by	{{{followed}}}
Characteristics
Design	{{{design}}}
Material	{{{material}}}
Trough construction	{{{material1}}}
Pier construction	{{{material2}}}
Total length	{{{length}}}
Width	{{{width}}}
Height	{{{height}}}
Water depth	{{{depth}}}
Traversable?	{{{traversable}}}
Towpaths	{{{towpath}}}
Longest span	{{{mainspan}}}
No. of spans	{{{number_spans}}}
Piers in water	{{{piers_in_water}}}
Load limit	{{{load}}}
Clearance above	{{{clearance_above}}}
Clearance below	{{{clearance_below}}}
No. of lanes	{{{lanes}}}
Design life	{{{life}}}
Diameter	{{{diameter}}}
First section length	{{{first_length}}}
First section diameter	{{{first_diameter}}}
Second section length	{{{second_length}}}
Second section diameter	{{{second_diameter}}}
Third section length	{{{third_length}}}
Third section diameter	{{{third_diameter}}}
Capacity	{{{capacity}}}
History
Architect	{{{architect}}}
Designer	{{{designer}}}
Contracted lead designer	{{{contracted_designer}}}
Successful competition design	{{{winner}}}
Engineering design by	{{{engineering}}}
Constructed by	{{{builder}}}
Fabrication by	{{{fabricator}}}
Built	{{{built}}}
Construction start	{{{begin}}}
Construction end	{{{complete}}}
Construction cost	{{{cost}}}
Opened	{{{opened}}}
Inaugurated	{{{inaugurated}}}
Rebuilt	{{{rebuilt}}}
Collapsed	{{{collapsed}}}
Destroyed	{{{destroyed}}}
Closed	{{{closed}}}
Demolished	{{{demolished}}}
Replaces	{{{replaces}}}
Replaced by	{{{replaced_by}}}
Statistics
Daily traffic	{{{traffic}}}
Toll	{{{toll}}}
{{{extra}}}
References
{{{references}}}

Using location map
Coordinates	0°N 0°E
{{{extra}}}

Copy and paste the template below:

{{Infobox bridge
| name                = 
| native_name         = 
| native_name_lang    = 
| image               = 
| image_size          =
| image_upright       = 
| alt                 = 
| caption             = 
| coordinates         = <!-- {{Coord}} -->
| fetchwikidata       =
| onlysourced         =
| carries             = 
| crosses             = 
| locale              = 
| starts              = 
| ends                = 
| official_name       = 
| other_name          = 
| named_for           = 
| owner               = 
| maint               = 
| heritage            = 
| id                  = 
| id_type             = 
| website             = 
| preceded            = <!-- or |upstream= -->
| followed            = <!-- or |downstream= -->
| design              = 
| material            = 
| material1           = 
| material2           = 
| length              = 
| width               = 
| height              = 
| depth               = 
| traversable         = 
| towpath             = 
| mainspan            = 
| number_spans        = 
| piers_in_water      = 
| load                = 
| clearance_above     = 
| clearance_below     = 
| lanes               = 
| life                = 
| diameter            =
| first_length        = 
| first_diameter      = 
| second_length       = 
| second_diameter     = 
| third_length        = 
| third_diameter      = 
| capacity            = 
| num_track           = 
| track_gauge         = 
| structure_gauge     = 
| electrification     = 
| architect           = 
| designer            = 
| contracted_designer = 
| winner              = 
| engineering         = 
| builder             = 
| fabricator          = 
| built               =
| begin               = 
| complete            = 
| cost                = 
| opened              = <!-- or |opening= |open= -->
| inaugurated         = <!-- or |dedicated= -->
| rebuilt             = 
| collapsed           = 
| destroyed           =
| closed              = 
| demolished          =
| replaces            = 
| replaced_by         = 
| traffic             = 
| toll                = 
| extra               = <!-- extra = module = embed = -->
| references          =
}}

Parameters

name

Name of bridge

native_name

Name of the bridge in the local language, if different

native_name_lang

ISO code for the local language (e.g. "fr" for French). If more than one, enter the native names using {{Lang}} instead.

image

Filename of image of the bridge

image_upright

Scaling value, where the default size is 1

alt

Alt text for bridge image (see WP:ALT)

caption

Text for caption beneath image

coordinates

Latitude and longitude. Use {{Coord}}. A typical four-lane bridge (25 m or 82.02 ft wide) requires 0.1 second or 0.0001° of precision.

os_grid_reference

OS grid reference

carries

Type of vehicles bridge carries

crosses

Body of water or geographic feature that is being crossed

locale

General area where located (e.g. San Francisco, Indiana-Kentucky State Line)

starts

Where the aqueduct starts

ends

Where the aqueduct ends

official_name

Official name

other_name

Also known as name

named_for

namesake

owner

Persons or body that owns the bridge

maint

Maintaining entity (e.g. California Department of Transportation)

heritage

Heritage status (e.g. UK listed building)

id

ID number, if available

id_type

Label for the ID field. The default, if this parameter is not specified, is ID number (for the United States National Bridge Inventory)

website

URL to the bridge's website; enclose within {{URL}}

preceded

Name of bridge upstream

followed

Name of bridge downstream

design

Type of bridge (cantilever, truss, suspension)

material

Construction material (concrete, steel, iron, stone, brick, wood)

material1

Construction material for trough

material2

Construction material for piers

length

Length of bridge, w/ conversions

width

Width of bridge, w/ conversions

height

Height of bridge, w/ conversions

depth

Depth of aqueduct channel, w/ conversions

diameter

(if it's pipe)

first_length

length of first section, if segmented

first_diameter

diameter of first section, if segmented

second_length

length of second section, if segmented

second_diameter

diameter of second section, if segmented

third_length

length of third section, if segmented

third_diameter

diameter of third section, if segmented

capacity

rate-of-flow

traversable

Can standard craft (for that navigation) pass on the aqueduct? Yes/No

towpath

Side of towpath (None, N, S, E, W, NE, NW, SE, SW, Both)

mainspan

Length of main span, w/ conversions

number_spans

Number of spans or arches

piers_in_water

Number of piers standing in a river or other water in normal conditions

load

Load limit of the bridge, w/ conversions

clearance_above

Clearance from the bridge deck to any part of the structure across the deck, if low enough to be problematic. Some bridges are clear above the deck.

clearance_below

Clearance beneath the bridge

life

Design life of the bridge in years

architect

Those responsible for the conceptual design of the bridge – to be used when engineering/construction design was done by another party

designer

Bridge designer/architect (e.g. Isambard Kingdom Brunel)

contracted_designer

The lead designer at the contract/post competition phase

winner

The winner/s of the design competition phase

engineering

The person or organization that did the engineering/construction design, where that differs from 'designer' above

builder

Construction company or bridge builder

fabricator

Steel fabricator

begin

Construction start date

complete

Construction end date

cost

Total project cost

open

Opening date, use {{Start date}}; If the bridge has yet not opened, use |opening=

inaugurated

the date the bridge is ceremonially opened

rebuilt

Date of major rebuild

collapsed

If collapsed, then date of collapse, don't use closed – closure is assumed

closed

Closing date

replaces

The bridge or ferry services that this bridge made redundant

replaced_by

The bridge or structure that replaced this bridge

traffic

Average Daily Traffic value

toll

Price of the toll (if a toll bridge)

extra

Spare field for modules, e.g. {{Infobox designation list}}

Use the coordinates= parameter with {{Coord}} to specify latitude and longitude. See the documentation for the Coord template for details on usage.

Map

• Basic parameters:
  • mapframe – Specify yes or no to show or hide the map, overriding the default. Default: no
  • mapframe-caption – Caption for the map. Default: blank (or if |mapframe-geomask= is set, "Location in geomask's label")
  • mapframe-custom – Use a custom map instead of the automatic mapframe. Specify either a {{maplink}} template, or another template that generates a mapframe map, or an image name. If used, the subsequent mapframe parameters will be ignored. Default: not specified
  • mapframe-id or id or qid – Id (Q-number) of Wikidata item to use. Default: item for current page
  • mapframe-coordinates or mapframe-coord or coordinates or coord – Coordinates to use, instead of any on Wikidata. Use the {{Coord}} template, e.g. |coord={{Coord|12.34|N|56.78|E}}. Default: coordinates from Wikidata
  • mapframe-wikidata – Set to yes to show shape/line features from the wikidata item, if any, when |coord= is set. Default: not specified
• Customise which features are displayed:
  • mapframe-shape – Turn off display of shape feature by setting to none. Use an inverse shape (geomask) instead of a regular shape by setting to inverse. Default: not specified
  • mapframe-point – Turn off display of point feature by setting to none. Force point marker to be displayed by setting to on. Default: not specified
  • mapframe-line – Turn off display of line feature by setting to none. Default: not specified
  • mapframe-switcher – set to auto or geomasks or zooms to enable Template:Switcher-style switching between multiple mapframes. Default: not specified
    • geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter
    • zooms – switch between "zoomed in"/"zoomed midway"/"zoomed out", where "zoomed in" is the default zoom (with a minimum of 3), "zoomed out" is 1, and "zoomed midway" is the average
• Other optional parameters:
  • mapframe-frame-width or mapframe-width – Frame width. Default: 270
  • mapframe-frame-height or mapframe-height – Frame height. Default: 200
  • mapframe-shape-fill – Color used to fill shape features. Default: #606060
  • mapframe-shape-fill-opacity – Opacity level of shape fill, a number between 0 and 1. Default: 0.5
  • mapframe-stroke-color or mapframe-stroke-colour – Color of line features, and outlines of shape features. Default: #ff0000
  • mapframe-stroke-width – Width of line features, and outlines of shape features; default is "5". Default: 5
  • mapframe-marker – Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options. Default: not specified (i.e. blank)
    • Can also be set to blank to override any default marker symbol
  • mapframe-marker-color or mapframe-marker-colour – Background color for the marker. Default: #5E74F3
  • mapframe-geomask-stroke-color or mapframe-geomask-stroke-colour – Color of outline of geomask shape. Default: #555555
  • mapframe-geomask-stroke-width – Width of outline of geomask shape. Default: 2
  • mapframe-geomask-fill – Color used to fill outside geomask features. Default: #606060
  • mapframe-geomask-fill-opacity – Opacity level of fill outside geomask features, a number between 0 and 1. Default: 0.5
  • mapframe-zoom – Set the zoom level, from "1" (map of earth) to "18" (maximum zoom in), to be used if the zoom level cannot be determined automatically from object length or area. Default: 10
  • mapframe-length_km or mapframe-length_mi or mapframe-area_km2 or mapframe-area_mi2 – Determine zoom level by passing in object's length (in kilometres or miles) or area (in square kilometres or square miles). Default: not specified
  • mapframe-frame-coordinates or mapframe-frame-coord – Alternate latitude and longitude coordinates for initial placement of map, using {{coord}}. Default: derived from item coordinates

Example

Sydney Harbour Bridge
Coordinates	33°51′8″S 151°12′38″E
Carries	Trains, Motor vehicles, pedestrians and bicycles
Crosses	Port Jackson
Locale	Sydney, New South Wales, Australia
Characteristics
Design	Through arch bridge
Total length	1,149 m (3,770 ft)
Width	49 m (161 ft)
Height	134 m (440 ft)
Longest span	503 m (1,650 ft)
Clearance below	49 m (161 ft) at mid-span
History
Construction start	28 July 1923
Construction end	19 January 1932
Opened	19 March 1932 (1932-03-19)

{{Infobox bridge
| name        = Sydney Harbour Bridge
| image       = Sydney Harbour Bridge from Circular Quay.jpg
| carries     = Trains, Motor vehicles, pedestrians and bicycles
| crosses     = [[w:Port Jackson|Port Jackson]]
| locale      = [[w:Sydney|Sydney]], [[w:New South Wales|New South Wales]], Australia
| design      = [[w:Through arch bridge|Through arch bridge]]
| length      = {{Convert|1149|m|ft|0|abbr=on}}
| width       = {{Convert|49|m|ft|0|abbr=on}}
| height      = {{Convert|134|m|ft|0|abbr=on}}
| mainspan    = {{Convert|503|m|ft|0|abbr=on}}
| above       = (?)
| below       = {{Convert|49|m|ft|0|abbr=on}} at mid-span
| begin       = 28 July 1923
| complete    = 19 January 1932
| open        = {{Start-date|19 March 1932}}
| coordinates = {{coord|33|51|8|S|151|12|38|E|region:AU-NSW_type:landmark|display = inline}}
}}

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• uid
• url
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter. A typical four-lane bridge (25 m or 82.02 ft wide) requires 0.1 second or 0.0001° of precision.

Tracking categories

• Category:Pages using infobox bridge with clearance (0)
• Category:Pages using infobox bridge with empty coordinates parameter (0)
• Category:Pages using infobox bridge with extra (0)
• Category:Pages using infobox bridge with extra embedded div (0)
• Category:Pages using infobox bridge with extra embedded table (0)
• Category:Pages using infobox bridge with id (2)
• Category:Pages using infobox bridge with unknown parameters (1)

TemplateData

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:Infobox bridge in articles based on its TemplateData. TemplateData for Infobox bridge <templatedata> { "params": { "child": {}, "embed": {}, "name": {}, "bridge_name": {}, "aqueduct_name": {}, "native_name": {}, "native_name_lang": {}, "image": { "type": "wiki-file-name" }, "image_size": {}, "image_upright": {}, "alt": {}, "caption": {}, "image_caption": {}, "coordinates": {}, "os_grid_reference": {}, "carries": {}, "crosses": {}, "locale": {}, "location": {}, "official_name": {}, "other_name": {}, "also_known_as": {}, "named_for": {}, "owner": {}, "maint": {}, "maintained": {}, "heritage": {}, "id_type": {}, "id": {}, "website": {}, "preceded": {}, "upstream": {}, "followed": {}, "downstream": {}, "design": {}, "material": {}, "material1": {}, "material2": {}, "length": {}, "width": {}, "height": {}, "depth": {}, "traversable": {}, "passable": {}, "towpath": {}, "mainspan": {}, "number_spans": {}, "spans": {}, "piers_in_water": {}, "pierswater": {}, "load": {}, "clearance_above": {}, "clearance": {}, "clearance_below": {}, "below": {}, "lanes": {}, "life": {}, "num_track": {}, "notrack": {}, "track_gauge": {}, "gauge": {}, "structure_gauge": {}, "electrification": {}, "architect": {}, "designer": {}, "winner": {}, "contracted_designer": {}, "engineering": {}, "builder": {}, "fabricator": {}, "begin": {}, "complete": {}, "cost": {}, "open": {}, "inaugurated": {}, "rebuilt": {}, "collapsed": {}, "closed": {}, "replaces": {}, "replaced_by": {}, "dedicated": {}, "opening": {}, "opened": {}, "traffic": {}, "toll": {}, "extra": {}, "references": {}, "refs": {}, "built": {}, "destroyed": {}, "mapframe": { "label": "Show mapframe map", "description": "Specify yes or no to show or hide the map, overriding the default", "example": "yes", "type": "string", "default": "no", "suggested": true }, "mapframe-caption": { "label": "Mapframe caption", "description": "Caption for the map. If mapframe-geomask is set, then the default is \"Location in <<geomask's label>>\"", "type": "string" }, "mapframe-custom": { "label": "Custom mapframe", "description": "Use a custom map instead of the automatic mapframe. Specify either a Map template, or another template that generates a mapframe map, or an image name. If used, other mapframe parameters will be ignored.", "type": "wiki-template-name" }, "mapframe-point": { "label": "Mapframe point feature", "description": "Override display of mapframe point feature. Turn off display of point feature by setting to \"none\". Force point marker to be displayed by setting to \"on\"", "type": "string" }, "mapframe-shape": { "label": "Mapframe shape feature", "description": "Override display of mapframe shape feature. Turn off by setting to \"none\". Use an inverse shape (geomask) instead of a regular shape by setting to \"inverse\"", "type": "string" }, "mapframe-frame-width": { "aliases": [ "mapframe-width" ], "label": "Mapframe width", "description": "Frame width in pixels", "type": "number", "default": "270" }, "mapframe-frame-height": { "aliases": [ "mapframe-height" ], "label": "Mapframe height", "description": "Frame height in pixels", "type": "number", "default": "200" }, "mapframe-shape-fill": { "label": "Mapframe shape fill", "description": "Color used to fill shape features", "type": "string", "default": "#606060" }, "mapframe-shape-fill-opacity": { "label": "Mapframe shape fill opacity", "description": "Opacity level of shape fill, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-stroke-color": { "aliases": [ "mapframe-stroke-colour" ], "label": "Mapframe stroke color", "description": "Color of line features, and outlines of shape features", "type": "string", "default": "#ff0000" }, "mapframe-stroke-width": { "label": "Mapframe stroke width", "description": "Width of line features, and outlines of shape features", "type": "number", "default": "5" }, "mapframe-marker": { "label": "Mapframe marker", "description": "Marker symbol to use for coordinates; see mw:Help:Extension:Kartographer/Icons for options", "example": "museum", "type": "string" }, "mapframe-marker-color": { "aliases": [ "mapframe-marker-colour" ], "label": "Mapframe marker color", "description": "Background color for the marker", "type": "string", "default": "#5E74F3" }, "mapframe-geomask": { "label": "Mapframe geomask", "description": "Wikidata item to use as a geomask (everything outside the boundary is shaded darker). Can either be a specific Wikidata item (Q-number), or a property that specifies the item to use (e.g. P17 for country, or P131 for located in the administrative territorial entity)", "example": "Q100", "type": "wiki-page-name" }, "mapframe-geomask-stroke-color": { "aliases": [ "mapframe-geomask-stroke-colour" ], "label": "Mapframe geomask stroke color", "description": "Color of outline of geomask shape", "type": "string", "default": "#555555" }, "mapframe-geomask-stroke-width": { "label": "Mapframe geomask stroke width", "description": "Width of outline of geomask shape", "type": "number", "default": "2" }, "mapframe-geomask-fill": { "label": "Mapframe geomask fill", "description": "Color used to fill outside geomask features", "type": "string", "default": "#606060" }, "mapframe-geomask-fill-opacity": { "label": "Mapframe geomask fill opacity", "description": "Opacity level of fill outside geomask features, a number between 0 and 1", "type": "number", "default": "0.5" }, "mapframe-zoom": { "label": "Mapframe zoom", "description": "Set the zoom level, from \"1\" to \"18\", used if the zoom level cannot be determined automatically from object length or area", "example": "12", "type": "number", "default": "10" }, "mapframe-length_km": { "label": "Mapframe length (km)", "description": "Object length in kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-length_mi": { "label": "Mapframe length (mi)", "description": "Object length in miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_km2": { "label": "Mapframe area (km^2)", "description": "Object arean square kilometres, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-area_mi2": { "label": "Mapframe area (mi^2)", "description": "Object area in square miles, for automatically determining zoom level. ONLY use ONE of the available parameters for length or area", "type": "number" }, "mapframe-frame-coordinates": { "aliases": [ "mapframe-frame-coord" ], "label": "Mapframe frame coordinates", "description": "Alternate latitude and longitude coordinates for initial placement of map, using ", "example": "12°21′N 56°43′E", "type": "wiki-template-name" }, "mapframe-switcher": { "label": "Mapframe switcher", "description": "Set to \"auto\" or \"geomasks\" or \"zooms\" to enable Template:Switcher-style switching between multiple mapframes. IF SET TO auto – switch geomasks found in location (P276) and located in the administrative territorial entity (P131) statements on the page's Wikidata item, searching recursively. E.g. an item's city, that city's state, and that state's country. IF SET TO geomasks – switch between the geomasks specified as a comma-separated list of Wikidata items (Q-numbers) in the mapframe-geomask parameter. IF SET TO zooms – switch between \"zoomed in\"/\"zoomed midway\"/\"zoomed out\", where \"zoomed in\" is the default zoom (with a minimum of 3), \"zoomed out\" is 1, and \"zoomed midway\" is the average.", "type": "string" }, "mapframe-coordinates": { "aliases": [ "mapframe-coord", "coordinates. coord" ], "label": "Mapframe coordinates ", "description": "Coordinates to use, instead of any on Wikidata. Use the template.", "example": "12°20′N 56°47′E", "type": "wiki-template-name", "default": "(coordinates from Wikidata)" }, "fetchwikidata": {}, "onlysourced": {}, "coord_format": {}, "starts": {}, "ends": {}, "diameter": {}, "first_length": {}, "first_diameter": {}, "second_length": {}, "second_diameter": {}, "third_length": {}, "third_diameter": {}, "capacity": {}, "demolished": {}, "embedded": {} }, "paramOrder": [ "child", "embed", "name", "bridge_name", "aqueduct_name", "native_name", "native_name_lang", "image", "image_size", "image_upright", "alt", "caption", "image_caption", "coordinates", "os_grid_reference", "carries", "crosses", "locale", "location", "official_name", "other_name", "also_known_as", "named_for", "owner", "maint", "maintained", "heritage", "id_type", "id", "website", "preceded", "upstream", "followed", "downstream", "design", "material", "material1", "material2", "length", "width", "height", "depth", "traversable", "passable", "towpath", "mainspan", "number_spans", "spans", "piers_in_water", "pierswater", "load", "clearance_above", "clearance", "clearance_below", "below", "lanes", "life", "num_track", "notrack", "track_gauge", "gauge", "structure_gauge", "electrification", "architect", "designer", "winner", "contracted_designer", "engineering", "builder", "fabricator", "built", "begin", "complete", "cost", "open", "inaugurated", "rebuilt", "collapsed", "destroyed", "closed", "replaces", "replaced_by", "dedicated", "opening", "opened", "traffic", "toll", "refs", "extra", "references", "mapframe", "mapframe-caption", "mapframe-custom", "mapframe-id", "mapframe-coordinates", "mapframe-wikidata", "mapframe-point", "mapframe-shape", "mapframe-frame-width", "mapframe-frame-height", "mapframe-shape-fill", "mapframe-shape-fill-opacity", "mapframe-stroke-color", "mapframe-stroke-width", "mapframe-marker", "mapframe-marker-color", "mapframe-geomask", "mapframe-geomask-stroke-color", "mapframe-geomask-stroke-width", "mapframe-geomask-fill", "mapframe-geomask-fill-opacity", "mapframe-zoom", "mapframe-length_km", "mapframe-length_mi", "mapframe-area_km2", "mapframe-area_mi2", "mapframe-frame-coordinates", "mapframe-switcher", "fetchwikidata", "onlysourced", "coord_format", "starts", "ends", "diameter", "first_length", "first_diameter", "second_length", "second_diameter", "third_length", "third_diameter", "capacity", "demolished", "embedded" ], "format": "block" } </templatedata>

The above documentation is transcluded from Template:Infobox bridge/doc. (edit | history)
Editors can experiment in this template's sandbox (create | mirror) and testcases (create) pages.
Add categories to the /doc subpage. Subpages of this template.