AARoads:Shields/Requests/Archive 4

This page is an archive. Do not edit the contents of this page. Please direct any additional comments to the current main page.

__ARCHIVEDTALK__

South Dakota shields

I would like to request shields for South Dakota Highway 109 and South Dakota Highway 324. Dough 48 72 03:44, 11 May 2010 (UTC)

Done I went ahead and remade the whole lot. —Fredddie ™ 03:54, 12 May 2010 (UTC)

Thanks Dough 48 72 15:59, 12 May 2010 (UTC)

Route 66 shields

Could you make a shield for Route 66 shown here? Also, please make the same shield but for US84 and US54. They are signed on Interstate 40 in the Santa Rosa, New Mexico area and once near Tucumcari and I would like to place these in the article's exit list. Gfoley4 (talk) 00:37, 31 May 2010 (UTC)

Are these in use anywhere on independent signs, or just on those big brown signs? —Fredddie ™ 03:27, 31 May 2010 (UTC)

I'm not sure if they are used as shields on the highway itself but are sometimes used on the green guide signs in New Mexico. [1] [2] [3] Gfoley4 (talk) 17:06, 31 May 2010 (UTC)

Would you like the shield to use the actual 1948 specifications? —Fredddie ™ 23:17, 31 May 2010 (UTC)

That would be good. Gfoley4 (talk) 01:04, 1 June 2010 (UTC)

Done . However, before placing them in an article, you may wish to discuss the issue at WT:USRD, since some people may prefer the standard shields to be used. —Scott5114 ↗ [EXACT CHANGE ONLY] 05:08, 5 June 2010 (UTC)

Thanks a lot! Gfoley4 (talk) 15:15, 5 June 2010 (UTC)

Mississippi Highway 450

Need a circle shield #450 for the above highway article, plus #448 and 454 for the browse box. 25or6to4 (talk) 05:33, 23 June 2010 (UTC)

Done

Here you are. Brandonrush Woo pig sooie 17:54, 5 July 2010 (UTC)

Thanks much! 25or6to4 (talk) 15:17, 6 July 2010 (UTC)

Shields for three Puerto Rico highways

Hello. I need an urban highway shield for Highway 166, and three secondary shields (county-style) for Highway 102, Highway 114 and Highway 122. Thank you. Kimmykun (talk) 17:28, 2 July 2010 (UTC)

Done Let me know if you need any more. —Fredddie ™ 23:49, 2 July 2010 (UTC)

List of Minnesota state highways serving state institutions

Requesting a shield for MN 323 for the aforementioned list. 25or6to4 (talk) 15:19, 6 July 2010 (UTC)

Done by Imzadi1979 (talk · contribs) —Fredddie ™ 04:07, 13 July 2010 (UTC)

Circle signs

Can I please have circle sign shields for 370, 969, and 992 to be used in articles? Dough 48 72 03:32, 9 June 2010 (UTC)

Done

—Fredddie ™ 03:41, 14 July 2010 (UTC)

Thanks. Dough 48 72 03:09, 25 July 2010 (UTC)

Two Texas FM shields

I would like to request shields for Ranch to Market Road 1721 (File:Texas RM 1721.svg) and Farm to Market Road 1622 (File:Texas FM 1622.svg) for the infobox in Ranch to Market Road 1623. TheCatalyst31 ^{Reaction•Creation} 22:57, 25 July 2010 (UTC)

Done –Fredddie ™ 23:42, 25 July 2010 (UTC)

Capitol Loop

Ok, I got confirmation today from MDOT that: ""per federal law copyrights can not be placed on sign designs therefore the sign is in public domain. Although [I am] correct that it [Capitol Loop marker] does not appear in the MUTCD it is still consider a route marker." Additionally, "we make it a policy not to give out vector art for the simple reason it can be altered and we don't want altered versions distributed or used." Well, that's fine and dandy, but I could photoshop the current PNG to alter it. They can't prohibit the creation of SVGs though since the design is now stated to be in the public domain. I'm going to need some help to create an SVG to replace File:CapitolLoop.png because of the complexity of the detail in the Capitol Dome. any thoughts? Imzadi 1979 → 21:26, 9 August 2010 (UTC)

Done as a Collaboration with the Graphics Lab. Imzadi 1979 → 16:00, 22 August 2010 (UTC)

More FM shields

I would like to request two more shields for Farm to Market Road 752 (File:Texas FM 752.svg) and Farm to Market Road 753 (File:Texas FM 753.svg) to be used in the article on FM 752, which was recently kept at Afd but still has no shield. TheCatalyst31 ^{Reaction•Creation} 01:20, 18 August 2010 (UTC)

Done I assume you wanted FM 752 and just forgot to change the link? RM 1721 already exists. Brandonrush Woo pig sooie 18:50, 22 August 2010 (UTC)

Shields for 7 Puerto Rico roads

Hi, I need shields for these 7 Puerto Rico roads.

PR-139 (this is a secondary road intersecting primary PR-14, thus the "county-style" shield is needed)
PR-501 (this is a tertiary road intersecting secondary PR-123, thus the traditional black numbers on round or oval white background, on square black background, is needed)
PR-502 (this is a tertiary road intersecting secondary PR-132, thus the traditional black numbers on round or oval white background, on square black background, is needed)
PR-504 (this is a secondary road intersecting primary PR-10, thus the "county-style" shield is needed)
PR-511 (this is a secondary road intersecting primary PR-14, thus the "county-style" shield is needed)
PR-578 (this is a secondary road intersecting primary PR-1, thus the "county-style" shield is needed)
PR-591 (this is a tertiary road intersecting primary PR-2, thus the traditional black numbers on round or oval white background, on square black background, is needed)

Should any additional info be required, please let me know! Thanks. Mercy11 (talk) 15:50, 22 August 2010 (UTC)

Done. Due to glitches at Commons, they may not appear, but I assure you they have been created. –Fredddie ™ 22:50, 22 August 2010 (UTC)

Freddie, although they ARE showing up in the respective infoboxes (for example PR-511 and PR-139), they are still NOT showing up whenever the jct template is used. For example see the entries for PR-511 and PR-139 in the infobox at PR-14. Thanks. Mercy11 (talk) 06:04, 24 August 2010 (UTC)

It could be related to the problems Commons was having. The problems are occuring when thumbnails were made for large files, not unlike what {{Jct}} does. I'll try purging the files, perhaps that will help. –Fredddie ™ 22:00, 25 August 2010 (UTC)

Correct shields needed for Dakota County, MN

Per the county's signage manual, several of the shields on Commons are incorrect.

The following need to be replaced with the square county shield (à la this:

--Sable232 (talk) 18:16, 22 August 2010 (UTC)

Done. Due to glitches at Commons, they may not appear, but I assure you they have been created. –Fredddie ™ 22:50, 22 August 2010 (UTC)

New Louisiana shields

As seen in this picture, Louisiana has changed the color on their state route markers. Is it possible for the colors on our set of LA shields to be updated? Dough 48 72 18:13, 8 June 2010 (UTC)

I have been wondering about this too. What should we do about it? And why on earth would Louisiana change to begin with? Brandonrush Woo pig sooie 17:54, 5 July 2010 (UTC)

It is my understanding that the green ink used to produce the signs is expensive and fades faster than black ink. I also understand that unlike South Carolina or Oklahoma's recent design changes that Louisiana will replace the old green and whites with black and whites as the individual signs need replacement, to save money and because the basic design didn't change, just the colors. I don't see a rush to create a new full set of graphics, and we should probably wait until someone says that the black and white is more common than the green and white. P.S. My other half is from outside of Morgan City, LA, and his family still lives there. I'll have him periodically ask friends down there that if they start to notice that more of the new signs are in place over the old signs to let us know. Others can do the same, and then I'd say to switch the articles over. Imzadi 1979 → 18:40, 5 July 2010 (UTC)

If the green really does fade quickly, than there should be quick turnover to the black signs. Brandonrush Woo pig sooie 19:39, 5 July 2010 (UTC)

It fade faster than black, not quickly. That means the life span is reduced, but not cut short. It could be years before they change over the state. Imzadi 1979 → 20:08, 5 July 2010 (UTC)

Old New Jersey shields

I would like to request several historical shields for US and state routes in New Jersey to be used in articles of routes that were removed by 1953.

For the state routes, I would like to request the following to the same specifications as File:NJ X (cutout).svg: 3, 4, 5, 7, 10, 12, 17, 21, 23, 24, 26, 27, 28, 29, 33, 34, 35, 36, 37, 38, 41, 44, 45, 47, 48, 49, 50, 52, 54
For the U.S. routes, I would like to request the following to the same specifications as File:Old US Route template.svg: 1, 9, 9W, 9E, 22, 30, 40, 46, 122, 130, 202, 206, 322 Dough 48 72 01:55, 1 June 2010 (UTC)

Not done per G1. —Fredddie ™ 02:18, 1 June 2010 (UTC)

Can you fill the first 10 at least and save the rest for later? Dough 48 72 02:27, 1 June 2010 (UTC)

Typically, when users have a large request in mind, they pick the 10 most important ones in that group and request those. That's probably the best course of action here. – T M F 19:19, 1 June 2010 (UTC)

For now, I would only like to request the following shields to be used in the New Jersey Route 39 article:

State route cutouts: 29, 37, 38, 54
US route cutouts: 30, 130, 206 Dough 48 72 00:04, 2 June 2010 (UTC)

Does it matter so much? Just leave it there and let the STF slowly cross them off the list. --P C B 03:47, 3 June 2010 (UTC)

Yes it matters. We have guidelines. We have to abide by them.Mitch32^{(Growing up with Wikipedia: 1 edit at a time.)} 10:53, 3 June 2010 (UTC)

Be advised that both of those templates that were linked to are out of spec. —Scott5114 ↗ [EXACT CHANGE ONLY] 22:45, 3 June 2010 (UTC)

Partially done: the U.S. shields can be found here. I could not create the 9W or 9E shields without photographs, since I'm not sure how the suffixes were handled. —Scott5114 ↗ [EXACT CHANGE ONLY] 03:33, 4 June 2010 (UTC)

Thanks - If I can eventually find a photo for 9W, I'll request that one. Dough 48 72 03:48, 4 June 2010 (UTC)
- Here is a picture of an old US 9W shield from NY. In addition, this page shows a bunch of old Tennessee US highway shields that follow the same specifications as the US 9W shield from NY. Based on this, I assume that the NJ US 9E/US 9W shields should be modeled on the NY US 9W shield. Dough 48 72 00:15, 6 June 2010 (UTC)
  - Is it possible to get Highway Route Marker Bot to create all of the requested cutout state route markers? Dough 48 72 03:10, 17 October 2010 (UTC)

Mass creation

Texas FM/RM

Any objection to letting the Highway Route Marker Bot make the rest of the FM/RM shields? –Fredddie ™ 22:53, 13 October 2010 (UTC)

I think that would be great if it works well. Imzadi 1979 → 22:57, 13 October 2010 (UTC)

I would be willing to give it a try with the Bot. What images are needed?--Svgalbertian (talk) 21:27, 16 October 2010 (UTC)

Needed shields are at the state subproject's completion list. Fortguy (talk) 21:43, 17 October 2010 (UTC)

Ugggh, what a horrible list, I would need to write a parser to figure out which files are still needed. So instead I decided write a paraser for TxDOT.

For the Ranch to Market Roads, only 3 files are needed File:Texas_RM_2224.svg, File:Texas_RM_2355.svg, and File:Texas_RM_2630.svg (current file uses wrong font). Cause of the low number, I will let humans handle those.
For Farm to Market we need 143 three digit signs and 1135 four digits signs, and one two digit sign. I will let a human handle File:Texas_FM_79.svg as it would use a different font size than the rest. The full list of signs needed can be found with the request: Commons:User:Highway Route Marker Bot/Requests#Farm to Market Road, three digit.

Some Farm to Market roads are missing from the completion list, when I get some free time I will try to add those in. Fredddie pointed out a font issue with my current bot, so I will need to do some additional testing before I run these.--Svgalbertian (talk) 07:52, 18 October 2010 (UTC)

In addition, there is Category:Jct template transclusions with missing shields, which lists shields that missing and throwing errors at {{Jct}}. –Fredddie ™ 21:57, 18 October 2010 (UTC)

All three digit signs have been created. Give them a look, and if there are no issues I will start on the 4 digit signs Thursday.--Svgalbertian (talk) 04:16, 19 October 2010 (UTC)

Holy crap. Awesome. –Fredddie ™ 05:05, 19 October 2010 (UTC)

Done--Svgalbertian (talk) 23:20, 21 October 2010 (UTC)

Cutout New Jersey route markers

Is it possible for Highway Route Marker Bot to make the following NJ cutout state route markers, based on File:NJ X (cutout).svg and File:NJ 46 (cutout).svg: 3, 4, 5, 7, 10, 12, 17, 21, 23, 24, 26, 27, 28, 29, 33, 34, 35, 36, 37, 38, 41, 42, 44, 45, 47, 48, 49, 50, 52, 54 Dough 48 72 19:40, 18 October 2010 (UTC)

Done --Svgalbertian (talk) 00:34, 22 October 2010 (UTC)

Thanks very much. Dough 48 72 00:40, 22 October 2010 (UTC)

I would also like to request File:NJ 151 (cutout).svg. Dough 48 72 18:43, 22 October 2010 (UTC)

That images does not use the standard template, someone needs to adjust the font size, so I will let a human handle it. --Svgalbertian (talk) 20:57, 22 October 2010 (UTC)

Bay Parkway shield

I need Holderca1's help with this. There needs to be a Bay Parkway shield for that article, instead of the reference marker. The letters are BA. (This is per Steve Anderson's site.)HighwayMaster (talk) 21:22, 19 September 2010 (UTC)

Do any shields exist for the parkway in reality? – T M F 19:21, 7 October 2010 (UTC)

Not done and not likely to be done I just received word from a roadgeek that's very familiar with the area that there are none, thus there should not be a shield for it here. – T M F 23:44, 5 November 2010 (UTC)

Texas sign correction/request

Hey all, Am requesting an addendum be made for a Business Route sign in Texas. Business 101-B file:Texas Business 101.svg is a sign without the sublettering showing which business route it is, in this case, 101-B. Would like to request a Bus 101 route with the B underneath, similar to others. This does follow MUTCD, but I have no physical proof that the sign looks like this in real life (Google shows the way with the separate BUS sign above the regular state highway shield). Thanks. 25or6to4 (talk) 22:28, 24 October 2010 (UTC)

Done

Bus. SH 101 –Fredddie ™ 01:48, 25 October 2010 (UTC)

Texas Bus. signs, part 2

Thanks for the above request. I would like to request the rest of the uncompleted business shields, using the automated bot, but i do not understand what it wants for the 2 svg images. Would it be suitable to post the reqeust there and only put one image from the current business images so they can get completed? 25or6to4 (talk) 21:27, 25 October 2010 (UTC)

I assume you are referring to Wikipedia:WikiProject Texas State Highways/Completion list/Business Highways. Unfortunately the bot was only written to replace strings in one location, so each lettered route would have to be separate template. It also doesn't dynamically adjust font sizes, so 1-99 would be a different template than 100+. That means I would need 17 different templates to create 31 images. So at this point I am not interested, but that is not to say that I am not intrigued and I might re-write the bot in the future to accommodate this.--Svgalbertian (talk) 22:57, 26 October 2010 (UTC)
- Yeah, that definitely doesn't sound feasible at this juncture. No problem. We'll just need to build more business routes in Texas. Go ahead and mark this declined and archive for now. 25or6to4 (talk) 23:55, 26 October 2010 (UTC)

More Texas

User:25or6to4 said he knew of more FM/RM routes not on the completion list. I guess I beat him to it. I added RM 2462 to the list although it is a former rather than existing route.

Also, FM 390 has a spur that needs a shield for the article's junction list. Although FM spurs are not designated separately from their parent routes, they are shielded differently. They use shields identical to state spur shields rather than FM shields but using the same number of the parent. Fortguy (talk) 00:17, 26 October 2010 (UTC)

Like this

FM Spur 390? –Fredddie ™ 02:28, 27 October 2010 (UTC)

Exactly Fortguy (talk) 03:21, 27 October 2010 (UTC)

There was a discussion some time back about these roads on the state subproject's talk page here. Fortguy (talk) 18:30, 27 October 2010 (UTC)

1920s NJ shields

I would like to request the 1920s style shields for the New Jersey routes on this page to the specs shown. ---Dough 48 72 02:56, 2 December 2009 (UTC)

Not done We need something more concrete than a small pencil drawing to create these. —Fredddie ™ 02:20, 1 June 2010 (UTC)

This link has some pictures of old shields. Dough 48 72 02:25, 1 June 2010 (UTC)

Any photographs? —Fredddie ™ 02:41, 1 June 2010 (UTC)

There are a few photos on the page [4] [5] [6]. Dough 48 72 14:19, 1 June 2010 (UTC)

The first two are drawings and you know that. The third picture is too pixelated to tell if it's a drawing or not. —Fredddie ™ 04:56, 3 June 2010 (UTC)

Ye olde NY USH cutouts

For use in a revamped List of U.S. Routes in New York:

1926 spec US 6N, US 7, US 9E, US 109, ~~US 122~~
~~1961 spec US 309~~

TIA. – T M F 07:42, 30 August 2010 (UTC)

Scratch 122; I can't find any reliable sources that state that US 122 ever entered New York. – T M F 08:10, 30 August 2010 (UTC)

1961 shield made as part of another request. – T M F 00:34, 14 December 2010 (UTC)

Done

—Scott5114 ↗ [EXACT CHANGE ONLY] 15:57, 14 December 2010 (UTC)

Awesome, thanks! – T M F 16:09, 14 December 2010 (UTC)

List of U.S. Routes in Washington

~~Was wondering if I could get the following shields for my list completion:~~

WA
95

101

830

OR
99

ID
10

95

195

~~all ala File:WA-US195.svg? Thansk! --Admrboltz (talk) 16:36, 17 November 2010 (UTC)~~

Request withdrawn --Admrboltz (talk) 00:33, 27 November 2010 (UTC)

List of New Mexico State Roads shorter than one mile

Just one missing shield, NM 576. Can I possibly get a shield for this list? --Admrboltz (talk) 00:33, 27 November 2010 (UTC)

Done –Fredddie ™ 07:29, 27 November 2010 (UTC)

Full suite of 1961 USH markers

Are there any objections to placing a request with User-multi error: package.lua:80: module 'Module:InterwikiTable' not found. to make a full suite of US Highway markers in the 1961 style? I have created a template based off of File:US shield evolution.svg for this purpose. –Fredddie ™ 04:56, 28 November 2010 (UTC)

I would support this. Are you planning on just doing 1 through 99, or do you intend on doing 3-digit routes too (which would probably require a copy of Series A to be dug up)? I suppose these shields would be useful in those states that still use '61 spec shields, like Arkansas, Mississippi (?) and Iowa (??). —Scott5114 ↗ [EXACT CHANGE ONLY] 06:27, 28 November 2010 (UTC)

If we somehow find a Series A fontface, I'm still waiting on a 1961-style US 309 marker for the NY USH list. – T M F 06:47, 28 November 2010 (UTC)

I was just planning on having it use Series B over 100, but Series A would probably be more period accurate. –Fredddie ™ 23:18, 28 November 2010 (UTC)

I'll support this as well. Just skip US 102 in doing the 3dUSs. It was decommissioned in 1928. US 112 can be skipped as could US 131. (MSHD didn't use the 1961 specs and stuck with the 1948 specs until the early 1970s when they switched. US 131 didn't exist in IN during that time frame.) Imzadi 1979 → 23:49, 28 November 2010 (UTC)

I suppose the $1,000,000 question is how do we get a copy of Series A? –Fredddie ™ 05:02, 29 November 2010 (UTC)

I found Series A, unfortunately you will have to pay for it. I found it here--Ltljltlj (talk) 17:20, 3 December 2010 (UTC)

In running User-multi error: package.lua:80: module 'Module:InterwikiTable' not found. I am not against using commercial fonts, I just want to make sure I am using them legally. I already paid $5.00 to use USHighwaysOldStyleBCBA. For this font $20.00 is not unreasonable and if someone gifts me the font I would use it.--Svgalbertian (talk) 19:18, 3 December 2010 (UTC)

My understanding of US copyright law is that the physical shapes of the letters in a typeface can't be copyright-protected. Font files for a computer are computer software, so they can carry a copyright. Having said that, and knowing that I'm not a laywer, once the letterforms are converted to a path, the job of the software is done, just as the job of a commercial image program is done once the image is created. I can't see that there would be any problem with using the series A typeface in this context. I can pitch in for the typeface. Anyone willing to chip in a few bucks as well? Imzadi 1979 → 00:08, 4 December 2010 (UTC)

$ I'll chip in only if I get a copy. :D –Fredddie ™ 00:39, 4 December 2010 (UTC)

Imzadi1979 you are correct only the font file is copyrighted, the typeface is not. As for sharing the font, according to the website it allows 1-5 users, so think we could share with anyone who puts in $5.00 or more.--Svgalbertian (talk) 05:38, 4 December 2010 (UTC)

Having acquired the font, I made a request on Commons. I requested 1-999 just so we wouldn't have to go back and make some more later. If anyone feels that's too many, please go to User-multi error: package.lua:80: module 'Module:InterwikiTable' not found.'s request page and correct it. –Fredddie ™ 14:55, 8 December 2010 (UTC)

Done, see Commons:Category:1961 U.S. Highway shields --Svgalbertian (talk) 00:40, 14 December 2010 (UTC)

U.S. Route 66 in New Mexico

Can I get an updated version of File:US 66 (historic).svg for NM like File:NM124US66WBnearBudville.jpg? (See page 118 of NMDOT Sign manual) --Admrboltz (talk) 17:40, 29 November 2010 (UTC)

Done.

. Imzadi 1979 → 19:21, 29 November 2010 (UTC)

New shields for I-95 in SC, VA, and other locations

Two state-specific I-95 articles have had new shields added to their exit lists which aren't showing up. They consist of;

Done Interstate 73(South Carolina) shield for Interstate 95 in South Carolina.
Virginia State Route 8900 (Stafford County) and Virginia State Route 3000 (Prince William County) for Interstate 95 in Virginia. The already exists, but it won't show up on the I-95 in Virginia page for some reason.

I'd like to see them added. ----DanTD (talk) 01:49, 2 May 2010 (UTC)

Dan, don't use Iowa shields in VA. Seriously, someone didn't use the right shield for VA-3000, using the name for a non-existent shield for Iowa. (Iowa's shields are technically different than other circles.) Using the {{jct}} with the type "sec" for secondaries and county#=<county name> in VA makes things simpler. Imzadi 1979 → 01:54, 2 May 2010 (UTC)

I didn't put the Iowa shields in. I think it just turned up that way when the anonymous IP who added them worked on the templates. And believe it or not, those junction templates already has "sec" for secondaries and the county names. ----DanTD (talk) 02:09, 2 May 2010 (UTC)

Done

I changed how {{Jct}} handles VA sec markers. Jct will now look for the file 'Circle sign #.svg' first before it will look for an 'Iowa #.svg' marker. That being said, you may see some wide elliptical markers where there should be a circle. I am working on a plan to correct this.

I am creating a set of wide markers in the naming scheme 'Ellipse sign #.svg' These will take the place of most files currently under the name 'Circle sign #.svg' I will then create a set of circular markers, now somewhat residing at 'Iowa #.svg'. Confused? Here's a table:

Image	Old name	New name
	Circle sign 700.svg	Ellipse sign 700.svg
	Circle sign 700 (Virginia).svg	Circle sign 700.svg

Any files that are leftover in the 'Iowa #.svg' naming convention that aren't in the Iowa spec will be purged from Commons. This will allow all of the VA sec markers to be under the 'Circle sign #.svg' convention.

I would appreciate some help in creating these new files. I'm making them when I have time and as such, I am only in the mid-400s of the Ellipse signs. I haven't started any of the 100-999 Circle signs. —Fredddie ™ 04:06, 14 July 2010 (UTC)

Thanks a lot, and good luck with all the new versions of VA Secondary Route shields. ----DanTD (talk) 04:31, 14 July 2010 (UTC)

Ellipse signs 1-999 done, see Commons:Category:Elliptical route shields.--Svgalbertian (talk) 05:06, 23 October 2010 (UTC)

Old MT Shields

Can I get a old US Route (like File:US 10 Cutout (MI).svg), and state specific Interstate shield (like File:I-90 (WA).svg) for Montana U.S. Route 10 and Interstate 90 for Interstate 90 in Montana? --Admrboltz (talk) 21:43, 9 November 2010 (UTC)

You don't want when you can have

. I can't help you with that one since there's a top secret way to make them.

Regardless, the interstate shield is

Done.

–Fredddie ™ 01:42, 10 November 2010 (UTC)

Thanks, and the '26 version will do just fine :) --Admrboltz (talk) 02:37, 10 November 2010 (UTC)

Done —Scott5114 ↗ [EXACT CHANGE ONLY] 07:40, 16 December 2010 (UTC)

Arkansas suite

I was wondering if the Highway Route Marker Bot could manage to complete my list at User:Brandonrush/AR state highways. I would type the list of routes needing shields, but there are quite a few and it would be quite a task. This would complete the shield needs for the State of Arkansas. Brandonrush Woo pig sooie 18:56, 6 December 2010 (UTC)

It can, but that request is made over on the HRMB page on Commons. Make sure that you provide a template and the full list so Svgalbertian can input them into the bot. See commons:User:Highway Route Marker Bot/Requests for more details. Imzadi 1979 → 19:56, 6 December 2010 (UTC)

Old US shields

I would like to request the following 1926-style US Route shields:

Delaware: 122
New Jersey: 9E, 9W (suffix style should appear similar to this)

Not done yet. I don't know how Scott makes them :( –Fredddie ™

Done

—Scott5114 ↗ [EXACT CHANGE ONLY] 08:20, 16 December 2010 (UTC)

- Thanks. Dough 48 72 17:30, 16 December 2010 (UTC)

In addition, I would like to request the following 1948-style US Route shield:

Delaware: 13 Dough 48 72 01:57, 12 December 2010 (UTC)

Done. I went ahead and made the full suite. –Fredddie ™ 00:27, 14 December 2010 (UTC)

MI US 1948s

The follow US Highways could use their 1948 variants created. (Posting here per a discussion with Fredddie on IRC.)

2, 8, 10, 12, 23, 24, 25, 27, 31, 33, 41, 45, 112, 127, 131, 141, 223. (US 102 was decommissioned in 1928 and US 112S was gone before the 1940s.) Imzadi 1979 → 00:24, 14 December 2010 (UTC)

Done. I did not do any sorting and had to upload them PD-self. –Fredddie ™ 19:37, 16 December 2010 (UTC)

NJ 151 cutout

Resolved

– Admrboltz (talk) 01:30, 11 January 2011 (UTC)

I would like to request File:NJ 151 (cutout).svg to the same specs as File:NJ X (cutout).svg and File:NJ 18N (cutout).svg. Dough 48 72 00:41, 29 October 2010 (UTC)

In addition, can I please have File:NJ 84 (cutout).svg? Dough 48 72 02:47, 10 January 2011 (UTC)

Route 84 is ~~Done~~. Route 151 is

Not done --Admrboltz (talk) 05:07, 10 January 2011 (UTC)

84 is uploaded, but aparently I dont have the old school font... So its there just not the right font... Sorry... --Admrboltz (talk) 05:11, 10 January 2011 (UTC)

That's okay, the shield can be fixed later. Dough 48 72 16:59, 10 January 2011 (UTC)

Done on the 84 and created the 151 Imzadi 1979 → 17:17, 10 January 2011 (UTC)

Thanks. Dough 48 72 01:27, 11 January 2011 (UTC)

I-84 "big" shield

Could someone take the time to fix the spacing of the I-84 shield with enlarged numerals? I'm talking about what was done to the I-80 shield (look at the original file and compare it with the current one). Thanks 70.143.80.193 (talk) 03:10, 1 January 2011 (UTC)

Not done. The large-numeral I-84 shield looks fine to me. –Fredddie ™ 04:14, 6 January 2011 (UTC)

Circle sign for Mississippi Highway 492

Resolved

Can File:Circle sign 492.svg be made for use next to Mississippi Highway 492 on List of highways numbered 492? --TheCatalyst31 ^{Reaction•Creation} 05:33, 5 January 2011 (UTC)

Try

Ellipse sign 492.svg instead. –Fredddie ™ 20:39, 5 January 2011 (UTC)

In fact, Mississippi and New Jersey have been migrated over to the ellipse sign nomenclature. There are files from 1-999, so there shouldn't be any issues unless there are some special cases that I haven't seen. –Fredddie ™ 21:17, 5 January 2011 (UTC)

Orange County shields

Resolved

May I have File:Orange County Route 26 NY.svg for County Route 517 (New Jersey) and File:Orange County Route 55 NY.svg for County Route 519 (New Jersey)? Dough 48 72 15:11, 5 January 2011 (UTC)

Also File:Orange County Route 16 NY.svg for County Route 521 (New Jersey). Dough 48 72 15:19, 5 January 2011 (UTC)

This would also be good for my proposed List of county routes in Orange County, New York, if I can ever finish it, or pass it along to somebody else who wants to. ----DanTD (talk) 17:12, 5 January 2011 (UTC)

Done --Admrboltz (talk) 05:36, 7 January 2011 (UTC)

Thanks. Dough 48 72 05:51, 7 January 2011 (UTC)

Question regarding use of US 1948 shields

So we're slowly building a selection of 1948-style US Highway shields. Since the MUTCD of the period said to post white square "oversize" markers at intersections, would it be a good idea to create a set of white square USHs for {{Jct}}? The cutout shields would still be used for infoboxes. I would send this request to HRMB. –Fredddie ™ 02:12, 23 December 2010 (UTC)

Probably should for legibility reasons if nothing else. Note that the 1948 oversize markers are identical to the 1961 markers other than having a white square in back instead of white. —Scott5114 ↗ [EXACT CHANGE ONLY] 10:20, 23 December 2010 (UTC)

Kinda like this? I made a few for Nova Scotia since that's what they use for trunk highways. –Fredddie ™ 13:28, 23 December 2010 (UTC)

Yeah, looks about right. There are most likely some photos on http://shields.aaroads.com/ if you want to poke around for them. —Scott5114 ↗ [EXACT CHANGE ONLY] 04:28, 25 December 2010 (UTC)

Done commons:Category:1948 U.S. Highway shields --Svgalbertian (talk) 23:59, 7 January 2011 (UTC)

US 30 Works! –Fredddie ™ 02:20, 8 January 2011 (UTC)

Arkansas business shield

May I please have File:US 49B.svg to the same specifications as File:US 62B.svg? Dough 48 72 03:53, 23 January 2011 (UTC)

Done. 64B was needed for the Jct error category, so that's done as well. –Fredddie ™ 04:22, 23 January 2011 (UTC)

Thanks. Dough 48 72 04:58, 23 January 2011 (UTC)

Fixes to US 49W/US 49E shields

Is it possible to have File:US 49W.svg and File:US 49E.svg modified to be 2-digit width and with a small suffix as seen in File:Highway49TutwilerMS.jpg? This appears to be the standard way of signing the route in MS and can also be seen here. Dough 48 72 21:12, 23 January 2011 (UTC)

Done –Fredddie ™ 01:32, 24 January 2011 (UTC)

Thanks. Dough 48 72 01:55, 24 January 2011 (UTC)

Missing PA 1926 shield

Is it possible to have File:PA-22 (1926).svg? Dough 48 72 03:18, 4 February 2011 (UTC)

Done--Svgalbertian (talk) 04:04, 4 February 2011 (UTC)

Thanks. Dough 48 72 04:07, 4 February 2011 (UTC)

Long Mountain Parkway shield

Stale

– Admrboltz (talk) 03:54, 6 January 2011 (UTC)

I'm requesting a Long Mountain Parkway shield(like this one) for U.S. Route 6 in New York, New York State Thruway, New York State Route 17, New York State Route 32, New York State Route 293, Palisades Interstate Parkway, and Seven Lakes Drive. ----DanTD (talk) 13:54, 6 June 2010 (UTC)

I just found another article this shield would be good for; Parkways in New York State. ----DanTD (talk) 11:18, 21 October 2010 (UTC)

Puerto Rico "Autopista" shield

Stale

– Admrboltz (talk) 03:54, 6 January 2011 (UTC)

I have a request for a shield: The Puerto Rico Autopista shield used on PR-22, PR-52, PR-53, and PR-66. Here is what it looks like: [7].

To incorporate them into the infoboxes, perhaps we can put the Autopista shield to the left of the route number shield rather than above it. ANDROS¹³³⁷ 16:45, 19 October 2010 (UTC)

Not done. This was cross-posted onto my talk page. –Fredddie ™ 21:44, 19 October 2010 (UTC)

I can't find the documents that I thought showed this route marker. –Fredddie ™ 07:31, 27 November 2010 (UTC)

Nebraska Loop, Spur, and Recreation road shields

Unresolved

– Admrboltz (talk) 03:54, 6 January 2011 (UTC)

Is it possible to get Highway Route Marker Bot to make shields for the Loop, Spur, and Recreation roads in Nebraska. The list of routes needing shields for each is at List of Nebraska Connecting Link, Spur, and Recreation Highways and the shield templates are as follows: File:N LINK Blank.svg for the link routes, File:N SPUR Blank.svg for the spur routes, and File:NF Blank.svg for the recreation roads. An example of how the numbers and letter suffixes appear on the shields is at File:N LINK 28B.svg. Dough 48 72 04:15, 17 November 2010 (UTC)

Blanks are not templates. Plus, the suffixes are a different size as the numbers, so I don't think the HRMB will be able to make them. –Fredddie ™ 04:39, 17 November 2010 (UTC)

Fredddie is right, HRMB would not be able to handle those. I am looking to make modification to the bot that will allow mulitple replacements, but cannot commit to when I will do it.--Svgalbertian (talk) 21:24, 23 November 2010 (UTC)

I-81 in WV

I may be blind or something, but File:I-81 (WV).svg seems a bit off centered... --Admr Boltz 05:00, 5 February 2011 (UTC)

Nominally, it's centered. If you look at any route marker ending in 1, they all look off center. –Fredddie ™ 05:21, 5 February 2011 (UTC)

On second glance, it was originally correct (kudos to TMF), but it was "updated" and the numbers centered. I reverted. –Fredddie ™ 05:40, 5 February 2011 (UTC)

Idaho State Highway 167

I'm requesting a shield, File:ID-167.svg, for List of Idaho State Highways; ID-167 is currently the only state highway without a shield. TheCatalyst31 ^{Reaction•Creation} 04:06, 27 February 2011 (UTC)

Done. –Fredddie ™ 00:26, 28 February 2011 (UTC)

Texas State Highway 550 toll...

Hey. I thought I had requested this earlier, but can't find a listing, or a shield. The new toll section of TX 550 has recently opened, and I am requesting an updated sign for it. The shield is actually the inverse of the TX toll sign colors: white lettering on blue background. There's a picture of an example on the Texas State Highway 255 page. I can also confirm that the state toll signs that I have experienced (Loop 1, TX 45, TX 130, TX 255, TX 550). Loop 49, on the other hand, uses the proper blue text on white background. Would like the blue background sign, but will also accept a proper standards TX Toll route sign for 550. 25or6to4 (talk) 01:31, 13 March 2011 (UTC)

Done

and

Imzadi 1979 → 01:14, 14 March 2011 (UTC)

Thanks! 25or6to4 (talk) 23:34, 15 March 2011 (UTC)

New Mexico bike route shields

I would like to request shields for List of New Mexico State Bike Routes based on these two images [8] [9] for the following routes: 1, 2, 5, 7, 9, 9A, 12, 14, 15, 18, 20, 53, 66, 547. Dough 48 72 03:44, 13 March 2011 (UTC)

I can't make any of these for you, but they're nice. ----DanTD (talk) 14:15, 13 March 2011 (UTC)

Working Imzadi 1979 → 16:08, 13 March 2011 (UTC)

I'm working on tweaking the border, and then I'll create and upload the rest. My software was being a pain earlier, but I have it working now. Imzadi 1979 → 19:09, 13 March 2011 (UTC)

Done

Plus File:NM bike template.svg all uploaded to Commons. Category:New Mexico Bike Route markers Imzadi 1979 → 20:03, 13 March 2011 (UTC)

Thanks. Dough 48 72 00:27, 14 March 2011 (UTC)

I know its Canada but...

Any one care to create a template for the bot to whip up some PEI route markers? suffixed route, non suffixed, more --Admrboltz (talk) 00:29, 20 December 2010 (UTC)

Part of the problem with Canadian route markers is that they can still carry crown copyright. But after looking at the current shield, if you ask 10 people to draw a bushy tree most would draw something extremely similar, so I am willing to go out on a limb and say the design falls below the threshold of originality. You can find a vector version of the sign on page 73 of the Drivers's Handbook that could be extracted (the black border should be green, but the rest looks right). My next project is is Saskatchewan (see dicussion), but once that is done I can take on PEI.--Svgalbertian (talk) 21:50, 22 December 2010 (UTC)

I am working with the Communications coordinator to see if its covered or not. Apparently the stupid trees are part of the PEI word mark. A SVG template for the three NB versions would be nice, as the ones we have are png. --Admrboltz (talk) 21:55, 22 December 2010 (UTC)

The trees in the wordmark are far more detailed than the ones in the road signs. I am willing to go ahead and tag it {{pd-ineligible}}, but if you do get premission be sure to log it with ORTS. As for NB, I won't take them at this time, but might in the future.--Svgalbertian (talk) 22:23, 22 December 2010 (UTC)

Thats what I was thinking too, but the sign shop people said it would be under Wordmark and Coat of Arms protection, and have sent me up the ladder. And OK, the NB ones should be good, they are just a shape and font. --Admrboltz (talk) 22:32, 22 December 2010 (UTC)

The basic design of the trees comes from the coat of arms, and since those were granted in in 1905 they are no longer covered by any copyright. Additionally, while the coat of arms have may have additional protection from the Coat of Arms Act, Wikimedia Commons is only concerned with copyright. But to be safe they can also be tagged {{insignia}} to warn of other protections. At this point I am still willing to go ahead at make these signs.--Svgalbertian (talk) 23:00, 22 December 2010 (UTC)

Sweet :) once the template is created, I will fill in the HWMB request. --Admrboltz (talk) 23:02, 22 December 2010 (UTC)

Great. I can't wait to see all the Canadian Route Shields here. I've made my share of route dab pages, and too many Canadian ones don't have shields. It's sad. ----DanTD (talk) 03:48, 6 January 2011 (UTC)

Here you go. Sorry for the delay, I was away from my computer on the holidays. The trees in the drivers handbook were different than seen on the sign, so I had to draw them by hand based on signs on Flickr. I might still tweek it in the next couple days, so feel free to let me know your thoughts. Don't worry about the HWMB request as that is my bot, and as soon as I finish making the actual template I will create the signs. Cheers. --Svgalbertian (talk) 00:11, 7 January 2011 (UTC)

Looks good :). Thanks for this --Admrboltz (talk) 00:18, 7 January 2011 (UTC)

Were you going to finish the run listed on the request page? --Admrboltz (talk) 03:59, 21 January 2011 (UTC)

Eventually, but I need to figure out the proper font spacings and size for the 100+ signs. It will take some time as I will try to reference some actual photos.--Svgalbertian (talk) 04:46, 21 January 2011 (UTC)

No worries, I just noticed you stopped. Makes sense :) --Admrboltz (talk) 04:49, 21 January 2011 (UTC)

Done --Svgalbertian (talk) 16:51, 19 April 2011 (UTC)

Bike route shields

Is it possible to have bike route markers for 2, 3, 4, 5, 6, 7, and 8 to the same specs as File:DE Bike 1.svg for List of bicycle routes in North Carolina? Dough 48 72 04:42, 2 February 2011 (UTC)

Can I also have two more for List of New York State Bicycle Routes, 9 and 17? Dough 48 72 17:16, 2 February 2011 (UTC)

While we're at it, I'd like to add a request a New York Bicycle Route 25. ----DanTD (talk) 17:38, 2 February 2011 (UTC)

And as I posted here, that list is missing about a dozen routes. – T M F 17:50, 2 February 2011 (UTC)

I didn't see that. I apologize. ----DanTD (talk) 18:02, 2 February 2011 (UTC)

OK, why are we using markers named "DE Bike foo" for other states? Clearly that's a naming convention problem. – T M F 17:50, 2 February 2011 (UTC)

Two other concerns: File:US Bike 13 Alternate.svg and File:DE Bike 1.svg are using identical styles (which will eventually lead to two redundant sets of markers over two NCs), and both are using a stretched-out version of the bicycle icon. Compare the bike on those to the bike on File:US Bike blank.svg. – T M F 17:58, 2 February 2011 (UTC)

I think you just answered your own question; Some bike route shields from other states and those in Delaware are identical to each other. ----DanTD (talk) 18:02, 2 February 2011 (UTC)

If so, then DE should be using a national set. Having two sets of identical shields is silly. – T M F 18:04, 2 February 2011 (UTC)

And a further comment to underscore why we shouldn't be using DE Bike foo as the naming convention: that design is a national design; specifically MUTCD sign M1-8. – T M F 18:04, 2 February 2011 (UTC)

Sounds like a rename request, and have the HWMB create say 1-99 of the M1-8 signs? --Admr Boltz 18:06, 2 February 2011 (UTC)

Sounds good to me. The bike needs to be fixed before the marker is sent to HRMB, though. – T M F 18:08, 2 February 2011 (UTC)

I agree we need a national set of shields based off File:US Bike 13 Alternate.svg along with a template for HRMB to make them. Dough 48 72 20:05, 2 February 2011 (UTC)

Since no one else has suggested new names for the markers, I'll present a proposal: rename the M1-8-style markers (like File:DE Bike 1.svg) to "US Bike # M1-8.svg" and the black-on-white (MUTCD M1-9, like File:US Bike blank.svg) to "US Bike # M1-9.svg". – T M F 21:51, 2 February 2011 (UTC)

As a disclaimer, the M1-8 shields are technically not for U.S. numbered bike routes, they are meant to be used for generic numbered bike routes. So, "US Bike x" is probably fine for the M1-9 U.S. numbered bike routes whereas something like "Bike x M1-8" could be used for the M1-8 generic bike routes. Dough 48 72 22:31, 2 February 2011 (UTC)

I see your point, but that name seems a bit ambiguous to me. – T M F 22:41, 2 February 2011 (UTC)

How about Oval Bike Route x.svg and US Bike Route x.svg? --Admr Boltz 23:14, 2 February 2011 (UTC)

That really doesn't do anything to resolve my ambiguity concern re the M1-8 signs. – T M F 23:47, 2 February 2011 (UTC)

I like your original idea, but the "M1-8" and "M1-9" sections should be in parentheses. ----DanTD (talk) 23:22, 2 February 2011 (UTC)

Agreed. –Fredddie ™ 23:29, 2 February 2011 (UTC)

If that's what most people want, I'm OK with that. Personally, I'm indifferent as to whether or not parentheses are used. – T M F 23:47, 2 February 2011 (UTC)

For reference, the MUTCD refers to the white and green oval marker as "the Bicycle Route (M1-8) sign" whereas the white and black acorn-looking marker is referred to as "The U.S. Bicycle Route (M1-9) sign". Perhaps a naming convention such as "bike route xx US.svg" and "U.S. Bicycle Route xx.svg", respectively, would be slightly more clear? The layman editor won't make any distinction based on MUTCD sign codes. -- LJ ↗ 08:14, 3 February 2011 (UTC)

Another comment: The U.S. Bicycle Route sign is fairly new, and is a program where route numbers are approved by AASHTO similar to the U.S numbered highways. To the best of my knowledge, there are few (if any) bicycle routes that have been officially approved such that many of these images would need creation at this point. — Preceding unsigned comment added by Ljthefro (talk • contribs)

Now that I could get behind. My biggest problem with the conventions proposed above was that they didn't clarify what country the M1-8 signs belonged to. I'd probably drop the dots in U.S. in the second NC though since we don't use them in any of the other marker NCs. – T M F 17:53, 3 February 2011 (UTC)

Renames have been requested to US Bike NN (M1-8).svg and US Bike NN (M1-9).svg. --Admr Boltz 00:15, 6 February 2011 (UTC)

I'm all for renaming them, but you tagged File:DE Bike 1.svg to be renamed " "File:US Bike 1 (M1-8).svg." ---DanTD (talk) 06:28, 6 February 2011 (UTC)

That is the M1-8 style, Dan. Imzadi 1979 → 07:33, 6 February 2011 (UTC)

I know, but he previously tagged this as "File:US Bike 13 (M1-8).svg," along with another one that was Bike Route 13. ----DanTD (talk) 13:29, 6 February 2011 (UTC)

Thank you Dan, I was copy and pasting. --Admr Boltz 15:37, 6 February 2011 (UTC)

The shields have now been renamed. The next step is to now set up a template for HRMB to make the M1-8 shields. Dough 48 72 17:24, 7 February 2011 (UTC)

Wait, so the naming convention is the same for both except for using the sign designator codes? What happened to using "US Bicycle Route XX" (full with capitalization) as a convention for the designated U.S. bicycle routes? This would help with ambiguity between the two, as the layman won't know the difference based on sign codes. -- LJ ↗ 19:49, 7 February 2011 (UTC)

Someone still needs to redraw the M1-8 shields using a non-stretched bike icon first. – T M F 21:35, 7 February 2011 (UTC)

Since no one else has done so, I've made the template (and fixed the bike icon) myself. See US Bike template (M1-8).svg. – T M F 00:52, 9 February 2011 (UTC)

Request for 1-99 submitted to HRMB. Dough 48 72 03:34, 9 February 2011 (UTC)

Done--Svgalbertian (talk) 19:40, 10 March 2011 (UTC)

Historic MN shields

I need a sample/template for the bot to create a set of 1920 and 1934 route markers for Minnesota. The two are identical save for the color, the 1920 is gold and the 1934 is white.

This is an example of an actual 1920 marker. (Another here.) Another is on the legend of this map and there's a good artist's representation on the back of this one.

I did make a few PNGs in the 1934 style but they're not particularly good and I'm pretty sure they're not shaped right.

--Sable232 (talk) 20:10, 6 February 2011 (UTC)

Done Finally. Like the Arkansas version below, opening the files in Inkscape will reveal the block numbers.

–Fredddie ™ 03:27, 17 March 2011 (UTC)

Historic Arkansas shields

Hey, could someone please make a template for the original Arkansas shields? They looked like this (also here) starting with the establishment of a state highway system in 1926. Brandonrush Woo pig sooie 01:13, 10 March 2011 (UTC)

It's another case of not having a copy of the block font. I think there are enough of the old-style shields around where I, or someone else, could create a file with all the characters available. I'll work on organizing the block letters and reply here. –Fredddie ™ 01:59, 10 March 2011 (UTC)

Doing... I have a working alphabet and a set of the wider numbers. If skinnier numbers are needed, I can use the font that's available. Now the issue is creating the cutout. There's a way to do it so it's not a lot of work, but I have yet to find it. If you have a cutout shape that you'd like me to use, please share it! –Fredddie ™ 01:50, 16 March 2011 (UTC)

Does the cutout need to be svg format?? Brandonrush Woo pig sooie 02:10, 16 March 2011 (UTC)

Not necessarily because shapes can be traced. However, to make the final product look good, the image should be fairly large. Making a large image smaller looks better than making a small image larger. –Fredddie ™ 11:58, 16 March 2011 (UTC)

This or this is the best I cound find for the "STATE ROAD" shields. For the later "ARKANSAS" ones, this if the overlap can be removed or this one if not are the best I can find. Is that appropriate size? Brandonrush Woo pig sooie 19:40, 16 March 2011 (UTC)

Any of those should work, thanks. –Fredddie ™ 21:50, 16 March 2011 (UTC)

Done.

–Fredddie ™ 02:20, 17 March 2011 (UTC)

Great job, thanks. This really does look good, and is highly valuable to the Arkansas road articles. Brandonrush Woo pig sooie 05:29, 17 March 2011 (UTC)

Texas FM business route

Shields are needed for Business Farm to Market Road 1431-J. This road is less than a year old and is one of only three such roads in the state. Kinu discovered it while destubbing the parent route. It needs lettered shields for the infobox such as:

The parent route's junction table also calls up more generic, unlettered shields such as:

Note that the road is designated as a Business FM Road even though the parent route is an RM Road. Fortguy (talk) 20:03, 18 April 2011 (UTC)

Done

–Fredddie ™ 04:14, 21 April 2011 (UTC)

Ohio State Route shields

A Shield is needed for Ohio State route 4s. This road does not have a shield, page or section of a page about it. Route11 (talk) 00:43, 9 May 2011 (UTC)

There is probably a good reason why it's not there, so here are a few questions for you. Where is/was 4S? What time period? Cutout or square? Block or rounded font? Can you prove it is/was there? –Fredddie ™ 03:05, 9 May 2011 (UTC)

Ohio State Route 4s is located in Dayton, Ohio. I do not know when it was put in but, it still exist today. The shield should be square and have rounded font. The only prove I have of it existing is this list of SR 4s junctions from ODOT (Ohio Department of Transportation):[10]. My link will not work to the PDF so click on the link, Click select route by number, Click 002-039, then find 0004S and click on MOT for proof.

Not done I am going to pass. Checking Street View, it's clear that SR 4S is signed simply as SR 4. However, SR 4B, in Butler County, is signed as SR 4 Bypass, so it simply needs a banner. –Fredddie ™ 20:21, 9 May 2011 (UTC)

Is there any chance of making a SR 4B shield? Route11 (talk) 21:06, 9 May 2011 (UTC)

No. If you read what I typed, all we need is a bypass banner. We have templates and infoboxes which handle this for us. –Fredddie ™ 02:11, 10 May 2011 (UTC)

1926 PA 81 shield?

May I please have File:PA-81 (1926).svg to the same specs as the other 1926 PA shields? Dough 48 72 02:17, 30 May 2011 (UTC)

Just curious to why? That route was never signed (ref: [11]). If you need a marker, I would suggest

--Svgalbertian (talk) 13:40, 11 June 2011 (UTC)

In that case, I will withdraw my request. Dough 48 72 05:02, 20 June 2011 (UTC)

AZ 24 & 30

Arizona State Route 24 is the new designation for Arizona State Route 802. (ref: here) By chance can a shield be made? Thanks.Mitch32^{(Can someone turn on the damn air conditioning?)} 01:27, 17 June 2011 (UTC)

Also add AZ 30 to this, as its the new designation for Arizona State Route 801. (Ref: [12])Mitch32^{(Can someone turn on the damn air conditioning?)} 01:29, 17 June 2011 (UTC)

Done.

–Fredddie ™ 05:11, 18 June 2011 (UTC)

Great River Road in Arkansas

Could someone make the Arkansas version of the Great River Road shield? I am going to begin using it on the appropriate articles junction lists. Brandonrush...Woo pig sooie 22:28, 20 June 2011 (UTC)

We have a generic

which I've used many times in articles. –Fredddie ™ 23:52, 20 June 2011 (UTC)

Is there any way to make the generic appear when using template:jct? Like Iowa Highway 22? Brandonrush Woo pig sooie 00:46, 21 June 2011 (UTC)

Done.

Great River Road –Fredddie ™ 00:56, 21 June 2011 (UTC)

Wow, thanks a lot! Brandonrush Woo pig sooie 00:59, 21 June 2011 (UTC)

1926 U.S. shields for Minnesota

File:US 10N (MN).svg and File:US 10S (MN).svg need to be replaced with the 1926-style shield. Both of these routes were removed in 1934, so the existing images are incorrect.

I would also like to request an example of a 1926 U.S. shield for Minnesota for the bot to use as a sample to create the state's full set. I'm not familiar with that process or what it entails though. --Sable232 (talk) 20:52, 15 December 2010 (UTC)

The current scheme of things isn't to replace shields made in the current, 1971 specs directly with previous versions. We have started to set up types of US 1926, US 1948 and US 1961 in both the infobox and {{jct}}. Combine that with the creation of older spec state markers, and an article can have the right vintage markers for the end year of an old highway. (As an example, look at U.S. Route 112. Even the Michigan state trunklines have cutout versions of the diamonds. Imzadi 1979 → 23:43, 15 December 2010 (UTC)

I know, but considering that these existing ones aren't used and never will be since AASHTO doesn't do letter suffixes anymore, I figured it'd be more prudent to just overwrite them. --Sable232 (talk) 00:45, 16 December 2010 (UTC)

I know what you mean. US 102 hasn't existed since 1928, yet we have 1961 and 1971 spec versions of it. I think the full sets are being made more for consistency (everything is there in case we want it later). Imzadi 1979 → 01:26, 16 December 2010 (UTC)

Do you want the suffix to be off-center like this photograph of a 10N shield shows, or were you wanting something more conventional? —Scott5114 ↗ [EXACT CHANGE ONLY] 08:33, 16 December 2010 (UTC)

If possible, yes, I think it should be as the actual shield is. Besides, 10S would probably look too much like like 105 if the letter was the same size. --Sable232 (talk) 03:15, 17 December 2010 (UTC)

Well, it's not the size I'm asking about so much as the off-centered-ness. —Scott5114 ↗ [EXACT CHANGE ONLY] 15:10, 21 December 2010 (UTC)

Yes, keep it off-center if it's feasible. --Sable232 (talk) 03:23, 24 December 2010 (UTC)

I would still like these... I'm going to start working on a 1920s route list soon and I expect to need them. --Sable232 (talk) 19:44, 6 February 2011 (UTC)

Done. Category:1926 Minnesota U.S. Highway shields. –Fredddie ™ 00:58, 24 July 2011 (UTC)

List of county roads in Alachua County, Florida

More county road shields requested for the List of county roads in Alachua County, Florida. I had redlinks there, but somebody did a clean-up that removed them, so I'm going to have to reverse that edit. ----DanTD (talk) 03:58, 22 May 2011 (UTC)

Done –Fredddie ™ 02:12, 24 July 2011 (UTC)

Thanks. ----DanTD (talk) 01:44, 31 July 2011 (UTC)

County road shield

Can I get a shield for Jefferson County, Colorado Road 70? For use in Colorado State Highway 46. Thanks. —GFOLEY FOUR!— 22:14, 30 July 2011 (UTC)

Done

–Fredddie ™ 00:58, 4 August 2011 (UTC)

Great River Road spur shield

Is there any chance I can get a "Great River Road Spur" shield? See here. Thanks. —GFOLEY FOUR!— 07:28, 3 August 2011 (UTC)

Also a pic here if it helps. It's basically a brown GRR sign with a 'SPUR' banner. —GFOLEY FOUR!— 07:30, 3 August 2011 (UTC)

Done –Fredddie ™ 01:29, 4 August 2011 (UTC)

Great River Road Spur now works in {{Jct}} –Fredddie ™ 22:50, 4 August 2011 (UTC)

Polk County and other Florida CR shields

More shields are needed for the List of county roads in Polk County, Florida, two of which would also turn up on U.S. Route 17 in Florida if they're added(Thanks for settling the issues of the description in Eagle Lake, Florida, Freddie). Also, there's one missing for Lake County Road 46, which is a county extension of Florida State Road 46. There are probably others that should be added, but I can't think of them right now. ----DanTD (talk) 15:33, 21 August 2011 (UTC)

UPDATE; Osceola County Roads need some shields too. If this is too many I'll wait. ----DanTD (talk) 16:25, 27 August 2011 (UTC)

Dan, use the Highway Route Marker Bot on Commons for lengthy requests. Imzadi 1979 → 23:11, 27 August 2011 (UTC)

Thanks for the tip. ----DanTD (talk) 00:33, 28 August 2011 (UTC)

1957 Interstate Highway shields

I would like to request the following 1957-style Interstate highway shields:

DE: 95, 295, 495
MD: 70, 70N, 70S, 170, 81, 83, 95, 295, 395, 495, 695, 895
NJ: 76, 78, 80, 95, 195, 278, 280, 287, 295, 676, 680, 695, 895
PA: 70, 70S, 76, 78, 79, 80, 80N, 80S, 81, 81E, 81S, 82, 83, 84, 90, 95, 176, 178, 179, 180, 276, 280, 283, 378, 479, 480, 495, 676, 680, 695, 876, 895 Dough 48 72 00:41, 11 September 2011 (UTC)
- I'm going to decline per the first guideline. –Fredddie™ 02:17, 11 September 2011 (UTC)
  - Is it possible to set up a template so the bot can make it? Dough 48 72 02:42, 11 September 2011 (UTC)

Additional shields for county roads in various counties in Minnesota

Please create the following county road shields:

County roads in Isanti County, Minnesota: CR 30 (replace current B/W square to B/Y pentagon with the current shield's name), CR 30 (a re-named version of the current B/W square), CR 36A (B/W square), CR 71 (B/W square), CR 72 (B/W square).
County roads in Pine County, Minnesota (all B/W square): CR 34, CR 35, CR 56, CR 60, CR 62 ~ CR 66.
County roads in Kanabec County, Minnesota (all B/W square): CR 1 ~ CR 8, CR 10 ~ CR 22, CR 24 ~ CR 30.

CJLippert (talk) 15:16, 5 July 2011 (UTC)

Done, finally. –Fredddie ™ 02:27, 23 January 2012 (UTC)

U.S. Bicycle route shields

Is it possible to have shields made for U.S. Bicycle Routes 1A, 8, 87, 95, 97, 108, and 208 following the format of File:US Bike blank (M1-9).svg? It would also be helpful for a template to be set up for future requests to be sent to HRMB. Dough 48 72 18:32, 22 October 2011 (UTC)

Yes it is possible. –Fredddie ™ 21:56, 22 October 2011 (UTC)

Done. –Fredddie ™ 02:04, 23 January 2012 (UTC)

Two Lake County, Florida road sheilds

I'm still having trouble with the Highway Route Marker Bot, so for now I'll request two county road shields in Florida;

Lake County Road 46: For List of county roads in Lake County, Florida, Florida State Road 46, Wikipedia:WikiProject Florida State Roads/Completion list/County, and an intersection list for a future article on U.S. Route 441 in Florida.
Old Lake County Road 50(See here) for List of county roads in Lake County, Florida, Wikipedia:WikiProject Florida State Roads/Completion list/County, and a small infobox on a chapter of Florida State Road 50.

For those County Road lists, I'll try to find a way to deal with them on the bot, but I have no idea how I'm going to work around the formatting. ----DanTD (talk) 14:57, 17 November 2011 (UTC)

UPDATE - I found a substitute for Lake County Road 46 a while back, and just made a cheap *png version of the Old Lake County Road 50 shield today. Since I can't make svg files to save my life, I'm still hoping for a replacement. ----DanTD (talk) 17:12, 17 January 2012 (UTC)

Do you want the CR 50 sign as it appears in the image or as it should appear according to the MUTCD? Brandonrush Woo pig sooie 17:47, 17 January 2012 (UTC)

I think I'll take it according to MUTCD, unless I can't add the "Old" banner to the List of Lake County Roads. Either way, I'd like to get this done before the blackout. ----DanTD (talk) 17:57, 17 January 2012 (UTC)

Done

Brandonrush Woo pig sooie 18:15, 17 January 2012 (UTC)

Thanks. Now can you replace the generic CR 46 shield with something Lake County-specific? ----DanTD (talk) 18:21, 17 January 2012 (UTC)

Done

I already updated the list, too. Merry blackout. Brandonrush Woo pig sooie 18:34, 17 January 2012 (UTC)

And thank again. Now I've got to think of another round of county road shields to request after the blackout. ----DanTD (talk) 19:00, 17 January 2012 (UTC)

Broome County 117

May I please have File:Broome County Route 117 NY.svg for the junction list in Pennsylvania Route 167? Dough 48 72 02:48, 7 December 2011 (UTC)

Done –Fredddie ™ 02:40, 12 December 2011 (UTC)

Thanks. Dough 48 72 17:55, 15 December 2011 (UTC)

1926 shields for US 66

I'd like to request shields like the one in Commons for Arizona (sorry, I tried linking it, but I'm not sure how to shrink it. It's at http://commons.wikimedia.org/wiki/File:US_66_Arizona_1926.svg), but for the other seven states (Illinois, Missouri, Kansas, Oklahoma, Texas, New Mexico, and California). Also, where can I get the 1926 fonts? PaulGS (talk) 19:41, 15 May 2012 (UTC)

You link it this way: [[:File:US 66 Arizona 1926.svg]] (File:US 66 Arizona 1926.svg). Making the 1926 versions are not easy, but I'll see what I can do. Also, there is no "1926 font" as far as fonts are concerned. I have cobbled together something that is useable, but it's hardly convenient. –Fredddie ™ 23:55, 15 May 2012 (UTC)

These were the easy ones. –Fredddie ™ 02:35, 16 May 2012 (UTC)

I am not sure what to do about California since the period signage usually contained an Automobile Club of Southern California logo. Should it be included? Reduced to a symbolic rendering, like just a blue ring? Ignored? —Scott5114 ↗ [EXACT CHANGE ONLY] 14:30, 16 May 2012 (UTC)

Since we'd need a FUR every time we used a California shield, I would forget it. Maybe include a note in the image description that it should be there but it's a non-free image. –Fredddie ™ 17:39, 16 May 2012 (UTC)

What about the thought of rendering where the logo is supposed to be as a blue ring (no AUTO. CLUB SO. CAL., no pine tree)? Or would we prefer to just leave it off entirely? —Scott5114 ↗ [EXACT CHANGE ONLY] 18:09, 16 May 2012 (UTC)

I guess we could do that, but it should be a black ring and a bell. My personal first choice would be to leave it off entirely, though. –Fredddie ™ 18:37, 16 May 2012 (UTC)

Done

—Scott5114 ↗ [EXACT CHANGE ONLY] 04:37, 18 May 2012 (UTC)

Thanks for these. Are we sure we can't use the logo, though? Anything created before 1923 is public domain, so the older logo may be old enough to be usable. PaulGS (talk) 20:42, 22 May 2012 (UTC)

We could, but without knowing the exact date the logo was created, it's not a good idea. –Fredddie ™ 22:35, 22 May 2012 (UTC)

Texas State Highway Spur 1966

Spur 1966 needs a shield. This proposed route is expected to be constructed within the next two and a half years, and now has an article. This will be the only state highway spur with a 4-digit number. Fortguy (talk) 22:55, 15 May 2012 (UTC)

Done. Thankfully, TXDOT's sign book gave instructions on how to handle 4-digit Spur shields. –Fredddie ™ 23:19, 15 May 2012 (UTC)

Interstate shields

At Commons:Category:Interstate_Highway_shields_with_name_of_state, I-55, I-94, and I-290 are missing for Illinois; I'd like to request these.

I'd also like to request some historical shields for use at Interstate#Interstate_shield. The article mentions four revisions to the design - 1957, 1861, 1971, and 1978 - I'd like to add a diagram of each to show the changes (if the 1978 design is still used, obviously, we have that). PaulGS (talk) 22:06, 6 June 2012 (UTC)

Were you thinking something along the lines of Media:US shield evolution.svg? I think that would be useful in the article. Also, I fixed the interwiki link to Commons. –Fredddie ™ 04:56, 7 June 2012 (UTC)

Yes, although I was thinking individual shields so they'd be available elsewhere, too, if ever needed (or as templates for others). But combining them also works, and that wouldn't be hard to put together. PaulGS (talk) 01:26, 8 June 2012 (UTC)

The others will have to correct me if I'm wrong, but I'm pretty sure we have everything we need. It's just not nearly as obvious as it is with the USH shields. The MUTCDs themselves are a bit foggy as the depictions from 1971 edition look just like the 1961 edition. But there is a standard drawing from the 1979 edition; I have not ever seen a standard drawing from the 1957, 1961, or 1971 edition. –Fredddie ™ 02:59, 8 June 2012 (UTC)

1957 version
1961 (wide is new)
1971 (new design)
1971 wide
1978 (no state name?)

I-35W in Kansas

May I request that someone make a shield for I-35W in Kansas (now known as I-135? There is an I-35W shield on the page, but it very small. I would like to see a larger-sized version of the old I-35W shield on the page. --JoBrLa (talk) 04:01, 17 June 2012 (UTC)

Done Imzadi 1979 → 06:20, 17 June 2012 (UTC)

New England Thruway shield

Despite my failed efforts to get a shield for the Long Mountain Parkway, I was advised to request a shield for the New England Thruway for historic purposes, despite the fact that the article is tagged to be merged into Interstate 95 in New York. ----DanTD (talk) 23:49, 12 March 2011 (UTC)

These are both made. I am new to this project, so I do not know why they were not done before; they are both incredibly simple, they only took 5 minutes each to make. As I don't know their copyright status, please advise on that before I upload them, or should they be e-mailed while you research that? → Michael J Ⓣ Ⓒ Ⓜ 05:04, 27 August 2012 (UTC)

Okay, I can't wait to see them. I'm afraid I don't know the copyright status myself, but there is a list on this somewhere. ----DanTD 05:16, 27 August 2012 (UTC)

They have been uploaded to Wikipedia in case they are fair use and not PD (in which case they are not acceptable for Commons). → Michael J Ⓣ Ⓒ Ⓜ 05:45, 27 August 2012 (UTC)

Great Lakes Circle Tours

Ok, I've confirmed that the markers are PD. Can someone help me get them converted to SVGs and rendered in MTUCD green? Once created, can they be uploaded directly to Commons?

Thanks in advance. Imzadi 1979 → 02:07, 20 August 2011 (UTC)

We'll also need MUTCD brown versions of the LSCT and LMCT markers as well. Imzadi 1979 → 23:37, 21 August 2011 (UTC)

Once the green version is made, making it brown is as simple as find/replace. –Fredddie ™ 02:28, 22 August 2011 (UTC)

I've cross-posted a request at Wikipedia:Graphic Lab/Illustration workshop#Great Lakes Circle Tours as well. Imzadi 1979 → 01:13, 22 August 2011 (UTC)

Sorry I didn't see this sooner, but I just got here. I am working on these. It is a shame that the rings on each sign are angled so differently. They are not even smooth curves. But I will get them done. → Michael J Ⓣ Ⓒ Ⓜ 03:38, 25 August 2012 (UTC)

OK, these are done. I also included the Seaway Trail, which is mentioned in the GLCT article in lieu of a tour around Lake Ontario. I do not have a Commons account, so what should be done with them. (I need some guidance in getting a Commons account.) → Michael J Ⓣ Ⓒ Ⓜ 08:45, 25 August 2012 (UTC)

Wikipedia:Unified login should have some links to help you set up a Single, Unified Login (SUL) which would "port" your user name and password to other project pages. It will then also link your accounts on each server together, so that if you login on enwp, it will also log you in on Commons, etc. That's the best place I can think to start on your account issue.

If you're up for it, the Michigan Heritage Route markers are in GIF format here at the moment. There are three of them, but fortunately, the only difference between them is a colored bar with a word on the bottom. They are:

If those can be converted at some point, then Michigan's tourist routes will be covered. Thanks for your hard work so far! Imzadi 1979 → 15:53, 25 August 2012 (UTC)

The Circle Tour signs have been uploaded to Commons. There are 8 of them: the overall GLCT, 4 lake tours (plus 2 in brown), and the Seaway Trail. I would like someone to check the copyright notifications and modify them if needed, please. I don't want them deleted because I screwed up that information. Thank you.

I will see what I can do with the Michigan Heritage signs in a day or so. They all have the same image, making it easier. Anyone know what font that is? → Michael J Ⓣ Ⓒ Ⓜ 19:08, 25 August 2012 (UTC)

Green-and-white Louisiana shields

Hey guys! I'm requesting a shield like seen here, but with the numbers 1208-5, 1208-6, and 950-10 through -17. Also, I'm requesting another shield, with numbers 950-1 through -9, but with this layout. Thanks!! Mcdonaat 20:17, 21 June 2012 (UTC)

Not done under 10 shield maximum. --Rs chen 7754 07:32, 3 August 2012 (UTC)

CR template

I would like to request that a template be made for the generic CR jct shields (without the name or the word "County"), similar to File:MUTCD_M1-6_template_00.svg. I would like this in order to send a request for HRMB to make the remainder of the CR jct shields between 1-999. Dough 48 72 13:18, 18 August 2012 (UTC)

Why? Most of them already exist, and we've been making them as they show up in the Jct missing shield category. –Fredddie ™ 13:52, 18 August 2012 (UTC)

It would allow for a complete collection should someone expand articles in which one of the CR shields would be needed. Dough 48 72 14:36, 18 August 2012 (UTC)

Not done I will continue to make them as needed. –Fredddie ™ 14:40, 18 August 2012 (UTC)

Chicago-Kansas City Expressway

Can I have a banner for the Chicago-Kansas City Expressway like the one seen here? Dough 48 72 00:58, 6 September 2012 (UTC)

I can do this. It seems fairly simple. Tell me, is this logo copyrighted? So I know whether to put it on WP for fair use, or free at Commons. → Michael J Ⓣ Ⓒ Ⓜ 02:31, 6 September 2012 (UTC)

It's a fairly new logo, so I have a feeling it might be copyrighted. To be safe, the sign should be uploaded with a fair-use rationale. Dough 48 72 03:12, 6 September 2012 (UTC)

In the Chicago-Kansas City Expressway article. Dough 48 72 03:39, 6 September 2012 (UTC)

Done. It is uploaded as File:Chicago_kc_sign.svg. I leave you the honor of putting it on the article. → Michael J Ⓣ Ⓒ Ⓜ 04:09, 6 September 2012 (UTC)

Thanks. Dough 48 72 04:47, 6 September 2012 (UTC)

Alternate Pennsylvania Turnpike shield

Can I have a version of File:Pennsylvania Turnpike logo.svg that has black text on a white keystone, as it appears on BGSs? It would be useful for instances where the shield is placed onto a dark background, such as green. Dough 48 72 03:10, 12 October 2012 (UTC)

I can make it easily, but it does not need to be uploaded to Wikipedia or to Commons because neither uses it. If you want me to send it to you, go to my talk page and use the e-mail link. → Michael J Ⓣ Ⓒ Ⓜ 18:11, 17 October 2012 (UTC)

I was intending on using it for a userbox on Wikipedia because it shows up better on a green background than a green shield. Dough 48 72 18:36, 17 October 2012 (UTC)

It is now uploaded to Commons as File:Pennsylvania_Turnpike_logo_white.svg. → Michael J Ⓣ Ⓒ Ⓜ 22:45, 17 October 2012 (UTC)

Thanks for the shield. It may help to include a thin black border around the shield when it is viewed alone to increase visibility. Dough 48 72 01:32, 18 October 2012 (UTC)

Agreed. Typically, we add a 1px solid black stroke to images with a white border. –Fredddie ™ 02:33, 18 October 2012 (UTC)

Looks good. Dough 48 72 02:48, 18 October 2012 (UTC)

I like that userbox. You should make it available (with variable exit number) to the general Wikipedia population. → Michael J Ⓣ Ⓒ Ⓜ 07:20, 18 October 2012 (UTC)

The userbox is available at User:Mr. Matté/Userboxes/Exit number 2. I posted it and its counterpart at WP:UBX/LOCATION to make it more visible to users. Dough 48 72 18:59, 18 October 2012 (UTC)

Georgia State Route 82 Connector

Can a shield for Georgia State Route 82 Connector be made? 01:55, 18 October 2012 (UTC)

This is done. The lack of this shield flagged two categories, Category:Jct template transclusions with missing shields and Category:Infobox road transclusions without route marker. There's no real need to make a request when these categories are flagged. –Fredddie ™ 02:36, 18 October 2012 (UTC)

I apologize. I didn't know that this was unneeded. Thank you for bearing with me through my growth as an editor. Allen (Morriswa) (talk) 19:00, 18 October 2012 (UTC)

AARoads:Shields/Requests/Archive 4

South Dakota shields

Route 66 shields

Mississippi Highway 450

Shields for three Puerto Rico highways

List of Minnesota state highways serving state institutions

Circle signs

Two Texas FM shields

Capitol Loop

More FM shields

Shields for 7 Puerto Rico roads

Correct shields needed for Dakota County, MN

New Louisiana shields

Old New Jersey shields

Mass creation

Texas FM/RM

Cutout New Jersey route markers

Bay Parkway shield

Texas sign correction/request

Texas Bus. signs, part 2

More Texas

1920s NJ shields

Ye olde NY USH cutouts

List of U.S. Routes in Washington

List of New Mexico State Roads shorter than one mile

Full suite of 1961 USH markers

U.S. Route 66 in New Mexico

New shields for I-95 in SC, VA, and other locations

Old MT Shields

Arkansas suite

Old US shields

MI US 1948s

NJ 151 cutout

I-84 "big" shield

Circle sign for Mississippi Highway 492

Orange County shields

Question regarding use of US 1948 shields

Arkansas business shield

Fixes to US 49W/US 49E shields

Missing PA 1926 shield

Long Mountain Parkway shield

Puerto Rico "Autopista" shield

Nebraska Loop, Spur, and Recreation road shields

I-81 in WV

Idaho State Highway 167

Texas State Highway 550 toll...

New Mexico bike route shields

I know its Canada but...

Bike route shields

Historic MN shields

Historic Arkansas shields

Texas FM business route

Ohio State Route shields

1926 PA 81 shield?

AZ 24 & 30

Great River Road in Arkansas

1926 U.S. shields for Minnesota

List of county roads in Alachua County, Florida

County road shield

Great River Road spur shield

Polk County and other Florida CR shields

1957 Interstate Highway shields

Additional shields for county roads in various counties in Minnesota

U.S. Bicycle route shields

Two Lake County, Florida road sheilds

Broome County 117

1926 shields for US 66

Texas State Highway Spur 1966

Interstate shields

I-35W in Kansas

New England Thruway shield

Great Lakes Circle Tours

Green-and-white Louisiana shields

CR template

Chicago-Kansas City Expressway

Alternate Pennsylvania Turnpike shield

Georgia State Route 82 Connector

Navigation menu

Search