AARoads:Shields/Requests/Archive 3

From the AARoads Wiki: Read about the road before you go
Jump to navigation Jump to search

__ARCHIVEDTALK__

Great Lakes Circle Tour

There are 6 shields in all I'd like to request. There's one for the Great Lakes Circle Tour, plus the five individual tours. [1] TIA --Imzadi1979 (talk) 05:26, 21 February 2008 (UTC)

Accept. I think that they are fair use and will need to be PNG. Carpetmaster101 15:33, 24 March 2008 (UTC)

The Lake Ontario tour doesn't appear to have its own sign per [2], probably because of the Seaway Trail in New York (which occupies half of the tour's route). (For the record, a sign for the Seaway Trail is already available on Wikipedia.) --TMF Let's Go Mets - Stats 18:58, 7 April 2008 (UTC)

Hare are some

 Done (only 2 were me, the rest were all ready uploaded)--Carpetmaster101 16:10, 21 December 2008 (UTC)

Interstate Future 49, Interstate Future 14, Business Spur 75, Business Spur 85, Business Loop 485, Downtown Spur 485, US 90 Old, US 90 Alternate

Interstate 49 with "Future" Interstate 49 Interstate 14 with "Future" Interstate 14 Business Spur 75 Interstate 75 Business Spur 85 Interstate 85 Business Loop 485 Interstate 485 Downtown Spur 485 Interstate 485 United States Route 90 with "Old" U.S. 90 United States Route 90 with "Alternate" U.S. 90 68.217.5.50 (talk) 12:14, 10 August 2008 (UTC)Aws06828

Come again? --NE2 12:59, 10 August 2008 (UTC)

The "Future" dictates proposed or planned future routes , like I-49 South from Lafayette to New Orleans and I-14 if that's what's confusing... 68.217.5.50 (talk) 15:02, 10 August 2008 (UTC)Aws06828

These are the shields I am looking for/requesting Aws06828 (talk) 15:04, 10 August 2008 (UTC)Aws06828

I-14 (Future).svg and Business Spur 75.svg already existed.
Alt plate.svg
US 90.svg Use this instead. I'd have to see an example of Old US 90 to know to make an old plate or a Georgia-style shield with Old in it.
I-49 (Future).svg Business Loop 485.svg Business Spur 85.svg Downtown Spur 485.svg--Fredddie (talk) 18:43, 10 August 2008 (UTC)

It would appear that this request was fulfilled? -- Carpetmaster101 00:21, 19 December 2008 (UTC)

 Done You are correct. My apologies for not doing this 4 months ago. --Fredddie 00:37, 19 December 2008 (UTC)

Image:Wayne County Route 101 NY.svg

I need a shield for this using the example as Image:Wayne County Route 254 NY.svg. Thanks!Mitch32(Go Syracuse) 01:13, 10 December 2008 (UTC)

Does it say "Lake Bluff" or something else? -- Carpetmaster101 22:39, 13 December 2008 (UTC)
Lake Road (sorry for not clarifying). In this case just "Lake". Mitch32(Go Syracuse) 22:49, 13 December 2008 (UTC)
 Done -- Carpetmaster101 00:48, 18 December 2008 (UTC)

List of county roads in Hamilton County, Florida

Requesting all or as many Hamilton County, Florida CR shields as possible. I'll work on the other two CR lists(Clay & Putnam), once I get those straightened out. ----DanTD (talk) 20:49, 10 December 2008 (UTC)

Accept -- Carpetmaster101 22:15, 13 December 2008 (UTC)

 Done -- Carpetmaster101 23:18, 17 December 2008 (UTC)

Thanks. Now I just have to categorize them, and use them where appropriate... oh, and try to sort out the Clay & Putnam County roads. ----DanTD (talk) 05:54, 18 December 2008 (UTC)
 Done Putnam + Clay CR shields are done -- Carpetmaster101 00:11, 19 December 2008 (UTC)
Wow. I wanted to do more work on the lists before I requested any shields, but thanks anyway. ----DanTD (talk) 17:01, 21 December 2008 (UTC)

Interstate 40 with Tennessee on it

The I-40 sign with Tennessee on, just like the OK one for example.

Original I-40 sign - http://commons.wikimedia.org/wiki/Image:I-40.svg

I-40 sign with Oklahoma written on - http://commons.wikimedia.org/wiki/Image:I-40_(OK).svg

Thankyou! = )

Melissa M —Preceding unsigned comment added by 72.174.157.164 (talk) 18:55, 13 December 2008 (UTC)

I don't think that TN interstates shields have the name on them. -- Carpetmaster101 22:38, 13 December 2008 (UTC)

Yeah they do - http://www.gribblenation.com/tnpics/gallery/i40tn-carter.jpg

Melisma0501 —Preceding unsigned comment added by Melisma0501 (talkcontribs) 19:08, 14 December 2008 (UTC)

Hey so you think you can make it for me? Kind of need it by 12/19/08 tho. Im sorry if I seem pushy! —Preceding unsigned comment added by Melisma0501 (talkcontribs) 22:07, 16 December 2008 (UTC)

There are 20 shields that have to be made and it seems like I am the only one here. So I can't promise anything. -- Carpetmaster101 22:39, 16 December 2008 (UTC)
Um, no. You can wait just like everybody else. --Rschen7754 (T C) 23:15, 17 December 2008 (UTC)
 Done Image:I-40 (TN).svg -- Carpetmaster101 23:37, 17 December 2008 (UTC)


Hey now Rschen7754 no need to be rude.

But thankyou carpetmaster101 - appreciate that so much! If i could repay you I would! —Preceding unsigned comment added by Melisma0501 (talkcontribs) 17:46, 18 December 2008 (UTC)

Somerset County shields

I would like to request two missing shields for List of county routes in Somerset County, New Jersey:

 DoneI messed up the description, but they should be ok -- Carpetmaster101 23:12, 17 December 2008 (UTC)
Thanks Dough4872 (talk) 01:54, 19 December 2008 (UTC)

Cape May County shield

I would like to request the following missing shield:

 Done -- Carpetmaster101 23:13, 17 December 2008 (UTC)
Thanks Dough4872 (talk) 01:54, 19 December 2008 (UTC)

Onondaga County shields

Two GAs, County Route 41 (Onondaga County, New York) and County Route 236 (Onondaga County, New York), don't have shields yet. Their shields are most likely the default county route template. Merry Christmas, from ComputerGuy talk 18:03, 21 December 2008 (UTC)

ComputerGuy, they are shield-less on purpose. Onondaga County signs 1 county route in the entire county. That is #57, which is actually CR 91, along old alignment of New York State Route 57.Mitch32(Go Syracuse) 23:26, 21 December 2008 (UTC)

Perry County, Illinois route shields

I'm requesting shields for a few routes to use in the intersection list on Illinois Route 152. The links are:

  • Perry County 4.svg
  • Perry County 7.svg
  • Perry County 25.svg

TheCatalyst31 ReactionCreation 22:27, 11 January 2009 (UTC)  Done --Fredddie 23:36, 11 January 2009 (UTC)

Monroe County, Florida route shields

Can you please upload a shield to:

These are part of the US 1 junction list I'm building, which can be seen in my sandbox. Thanks! --Mgillfr (talk) 21:32, 18 January 2009 (UTC)

Do you know what else those shields would be good for? A future List of county roads in Monroe County, Florida, if one is ever made. I'm not planning one right now, but I have considered lists for other counties in Florida, and I'm working on one for Orange County, New York. ----DanTD (talk) 06:07, 19 January 2009 (UTC)
Yes, but I only recently joined Florida roads. I'm still new to it, so I'm not likely going to be creating that list anytime soon either. But that is anoter very good reason to create those shields. Mgillfr (talk) 07:14, 19 January 2009 (UTC)
 Done --Fredddie 07:33, 19 January 2009 (UTC)
Actually, it's not done. This person uploaded under the wrong title. It's "county road" not "county route".

-- M*gill*FR (blab to me) 21:55, 19 January 2009 (UTC)

I inserted a rename request for the above shields. --Fredddie 01:40, 20 January 2009 (UTC)

Warren County NY shields needed again

As used with File:Warren County Route 79 NY.svg, I need this style of shield for CRs 80, 81 and 82. I need File:Warren County Route 21A NY.svg converted to a 2 row shield, with 21 atop and A at the bottom. As for that type of shield, File:Warren County Route 21A NY.svg, I need County Routes 32B and 11B made as well. If you could do those, thanks!Mitch32(Go Syracuse) 11:00, 19 January 2009 (UTC)

 Done Warren County Route 11B NY.svgWarren County Route 21A NY.svgWarren County Route 32B NY.svgWarren County Route 80 NY.svgWarren County Route 81 NY.svgWarren County Route 82 NY.svgScott5114 [EXACT CHANGE ONLY] 10:08, 31 January 2009 (UTC)

Arkansas Shields

Thank you very much for your help with these. Brandonrush Woo pig sooie! 15:39, 1 March 2009 (UTC)

Accepted. --Fredddie 01:16, 2 March 2009 (UTC)
 Done --Fredddie 03:50, 2 March 2009 (UTC)
Sorry to bother you again, Fredddie, but could you also make AR 70 when you get the time? (Arkansas 70.svg) The first three look great, thanks a bunch! Brandonrush Woo pig sooie! 23:25, 2 March 2009 (UTC)

Interstate 205 Business Loop shield California style

Please make a California-style I-205 Bus. loop loop shield that looks somewhat like this: [9] and upload it under the title File:Business Loop 205 (CA).svg. Basically use Image:I-205 (CA).svg shield, turn background green, replace "Interstate" with "Business" as well as "California" with "Loop". Oh and if you're at it, also please do this similar process for File:Business Loop 205 (CA).svg please. -- M*gill*FR (blab to me) 02:54, 7 March 2009 (UTC)

 Done Business Loop 205 (CA).svg --Fredddie 05:30, 7 March 2009 (UTC)

Lee County 719

Cound someone please make a shield for Lee County Road 719 (File:Lee County 719.svg)? It looks like these. It will be used on Arkansas Highway 131. Thanks! Brandonrush Woo pig sooie! 00:20, 10 March 2009 (UTC)

 Done Lee County 719 AR.svg --Fredddie 02:36, 10 March 2009 (UTC)

List of fixed crossings of the Hudson River

There are County Road shields missing from List of fixed crossings of the Hudson River. So far, they consist of;

  • Rensselaer County Route 120 NY.svg Rensselaer County Road 120
  • Washington County Route 113 NY.svg Washignton County Road 113
  • Saratoga County Route 42 NY.svg Saratoga County Road 42
  • Washington County Route 70 NY.svg Washignton County Road 70
  • Saratoga County Route 27 NY.svg Saratoga County Road 27
  • Saratoga County Route 9 NY.svg Saratoga County Road 9
  • Warren County Road 16
  • Warren County Road 4.

The shields can also be used for Schuylerville Bridge, and any future bridge article. ----DanTD (talk) 17:26, 29 December 2008 (UTC)

Actually, that's not true anymore. I need Warren County Routes 11B, 32B, 80, 81, and 82. Found them on my map of Warren County.Mitch32(Go Syracuse) 18:40, 6 January 2009 (UTC)
Okay, since there doesn't seem to be much happening with this, maybe I should've thrown up the redlinks for these. Here they are'

Now there should be something to work with. ----DanTD (talk) 00:36, 9 March 2009 (UTC)

Hold off on Washington 113 and 70, I need to get the format for you.Mitch32(Go Syracuse) 20:46, 12 March 2009 (UTC)
 Done --Fredddie 03:00, 23 March 2009 (UTC)
Note: The example of a Washington County, NY, shield I found here shows a standard pentagon. --Fredddie
I would leave it for now, but WC is in the middle of 3 different shield types.Mitch32(Go Syracuse) 09:52, 23 March 2009 (UTC)
Thanks, although the Rensselaer County Road 120 shield is currently tagged for speedy deletion, all of the sudden. Hope my other requests are fulfilled soon. ----DanTD (talk) 15:51, 23 March 2009 (UTC)
That's because I spelled it wrong. --Fredddie 22:01, 23 March 2009 (UTC)
Fixed. --Fredddie 01:24, 24 March 2009 (UTC)
Thanks again, as belated as it is. As you can see, I'm using them. ----DanTD (talk) 16:43, 3 April 2009 (UTC)


Florida State Road 24A

Believe it or not, I'm doing something I never thought I'd do again; Request a Florida State Road shield, in this case Florida State Road 24A which can be proven to exist at this link of an image made from Google Earth(http://img528.imageshack.us/my.php?image=fl24a226331ct0.jpg) at the eastern terminus of Florida State Road 226 & Florida State Road 331. This will be for a proposed chapter on Florida State Road 24, but it could also be added to future articles on FL 226, 331, and 329 as well. ----DanTD (talk) 16:39, 4 January 2009 (UTC)

Here's the blank: (Florida 24A.svg). ----DanTD (talk) 04:54, 9 March 2009 (UTC)
UPDATE: I've already created an article for Florida State Road 331, and I'm working on those for SR 226 and 329, and these also have the redlink for the FL 24A shield. ----DanTD (talk) 14:56, 3 April 2009 (UTC)
ANOTHER UPDATE: Well, now the articles on Florida State Road 226 and Florida State Road 329 were also made, and they include the redlink to the SR 24A shield as well. I hope somebody is working on this. ----DanTD (talk) 16:08, 15 April 2009 (UTC)
I didn't create it, but I fixed it. --Fredddie 00:09, 16 April 2009 (UTC)
Hey, thanks a lot. ----DanTD (talk) 01:26, 16 April 2009 (UTC)

County Roads 42 & 17, Minnesota

I would highly appreciate if someone made a shield for County Road 42, and for County Road 17, using this as an example. --A.z888?z.a (talk) 01:17, 15 February 2009 (UTC)

To clarify things, I need 2 shields for County Road 42, one for Scott County and the other for Dakota County. County Road 17 would be for Scott County only.--A.z888?z.a (talk) 15:10, 15 February 2009 (UTC)
Accepted --Fredddie 16:28, 5 April 2009 (UTC)
Scott County Route 17 MN.svgScott County Route 42 MN.svg  Done --Fredddie 20:51, 6 April 2009 (UTC)


Cape May County shield

I would like to request the following missing Cape May County shield:

 Done --Fredddie 02:48, 23 March 2009 (UTC)
Thanks Dough4872 (talk) 16:39, 3 April 2009 (UTC)


Arkansas Highway Spurs and Business loops

I would like to request a missing shield for Arkansas Highway 14 Spur (Arkansas 14S.svg) be created.

I also need AR 230 (Arkansas 230.svg),

AR 69 Business (Arkansas 69B.svg),

AR 1 Business (Arkansas 1B.svg),

AR 1 Spur (Arkansas 1S.svg) and

AR 60 Spur (Arkansas 60S.svg)

Thanks! Brandonrush Woo pig sooie! 17:29, 21 March 2009 (UTC)

 Done --Fredddie 21:15, 6 April 2009 (UTC)
Thanks, and can I ask how to get the Spur S and Business B on the shields? I have made a few standard number ones (Arkansas 230.svg) in inkscape but was unsure about how to make the S and B according to conventions. If you could inform me of this, I could probably make any Arkansas shield required and could stop asking. Brandonrush Woo pig sooie! 17:29, 21 March 2009 (UTC)
I typed in the route number and moved it a little off-center. Then I just created a new text object and made it about the right size. I guessed it to be about 150pt and it looked pretty good. Then I just saved it to path like normal. --Fredddie 23:24, 6 April 2009 (UTC)
Thanks Fredddie, this helps a lot! Brandonrush Woo pig sooie! 00:19, 7 April 2009 (UTC)

I like the Arkansas highway shields look like "Roadgeek 2005 Series D" for routes Raquel350 06:05, 8 May 2010 (UTC)


Missouri Interstate shields

Do the numbers look off-center to anybody else? --Fredddie 01:29, 18 April 2009 (UTC)
I-29 (MO).svgI-35 (MO).svgI-44 (MO).svgI-55 (MO).svgI-64 (MO).svgI-70 (MO).svgI-72 (MO).svg

Yes, especially noticeable on the I-72 shield.Mitchazenia :  Chat  Trained for the pen 02:30, 18 April 2009 (UTC)
Yes, I-72 is definitely off. I flipped the numbers to rule out any illusion caused by the shapes of the numbers, and the 2 is closer to the edge than the 7:
I-72 (MO).svgFile:I-72 (MO) temporary.svg
--NE2 03:28, 18 April 2009 (UTC)
New versions uploaded. --Fredddie 17:44, 19 April 2009 (UTC)


South Carolina 154

File:South Carolina 154.svg for List of numbered highways in South Carolina. While I realize the current trend seems to be away from needlessly putting all the shield images on list articles, this seems to be the only current highway without a shield, so I figured I'd go ahead and request it. -- Kacie Jane (talk) 01:24, 4 May 2009 (UTC)

On a related topic, would someone be willing to make blue auxiliary plates for SC highways? I haven't scoured the resources to see what types exist, but there's at least one business route I need a plate for to include in an infobox. Thanks! -- Kacie Jane (talk) 07:13, 5 May 2009 (UTC)

Accepted and Complete South Carolina 154.svg Business plate South Carolina.svg Alt plate South Carolina.svg East plate South Carolina.svg West plate South Carolina.svg North plate South Carolina.svg South plate South Carolina.svg Jct plate South Carolina.svg To plate South Carolina.svg End plate South Carolina.svg --Ltljltlj (talk) 18:46, 5 May 2009 (UTC)

missing shields for County roads in St. Louis County, Minnesota

Hello !

I am requesting missing shield images for the article "County roads in St. Louis County, Minnesota", there are eight routes in the article that are missing the county shield images.

The routes with the missing shields are County Roads 5, 8, 25, 49, 52, 92, 93, and 100.

St. Louis County uses the "black-on-white" shields for these routes.

I appreciate your help. Thank you.

Damon207 (talk) 00:02, 10 May 2009 (UTC)

Accepted and  Done --Fredddie 20:10, 10 May 2009 (UTC)
St Louis County Route 5 MN.svg St Louis County Route 8 MN.svg St Louis County Route 25 MN.svg St Louis County Route 49 MN.svg St Louis County Route 52 MN.svg St Louis County Route 92 MN.svg St Louis County Route 93 MN.svg St Louis County Route 100 MN.svg

Thanks Fredddie! It is appreciated. Damon207 (talk) 21:29, 11 May 2009 (UTC)

Image:NY-917A.svg

Could I have this made as a provisional?Mitch32(Go Syracuse) 00:50, 29 January 2009 (UTC)

I can do it, but I need to know what numbers are needed on the reference shield. --Fredddie 22:12, 9 February 2009 (UTC)
File:NY-912C.svg is an example.Mitch32(Go Syracuse) 22:17, 9 February 2009 (UTC)
Well, I have the image done, it's just a matter of Commons letting me upload it. --Fredddie 09:09, 10 February 2009 (UTC)
It will now; see the bottom of WT:USRD. – TMF 20:34, 4 June 2009 (UTC)
Still doesn't work. This is the error I get at Commons: "The file you uploaded seems to be empty. This might be due to a typo in the file name. Please check whether you really want to upload this file." --Fredddie 23:39, 4 June 2009 (UTC)
Hm...the file name should work, as I successfully migrated a shield for NY 383B to commons earlier today. Maybe it's an error in the file? – TMF 02:03, 5 June 2009 (UTC)
Follow-up: it's definitely an error in the file as I was able to upload File:NY-952Q.svg, and I see no reason why "NY-917A.svg" wouldn't be accepted. – TMF 04:53, 5 June 2009 (UTC)
You're right. I remade the file and got it to work. --Fredddie 20:53, 5 June 2009 (UTC)

 Done NY-917A.svg

Hundreds of Kentucky (circle) shields

Apologies for such a large request, but List of State Highways in Kentucky (1-1000) has hundreds of missing shields, and ImageRemovalBot has been steadily messing with the page, removing each shield one by one (for a total for 996 edits by the bot). As these are generic shields (the elongated circle shields) which can be used in other states, we should really have these shields. I'm guessing there are probably also some four-digit shields which need to be done too. I am rolling back its edits so you can see all the shields we need, but we should work quickly to fix the redlinks ASAP, as they look unprofessional. Probably the best idea here would be to split the shields up between several shield makers. It is advised to use some sort of auto-upload tool like Commonist to upload them upon completion. I will try to chip in when I can. —Scott5114 [EXACT CHANGE ONLY] 21:45, 18 November 2008 (UTC)

Why are the shields on the list in the first place? --NE2 02:20, 19 November 2008 (UTC)
I haven't a clue. It looks like they've always been there. I'm guessing that all of these were OK when we used the Circle sign x.svg images for Kentucky, but when we introduced the elongated circle x.svg set, they were AWBed over, and then forgotten about. —Scott5114 [EXACT CHANGE ONLY] 05:47, 19 November 2008 (UTC)
I guess that I will start working on some of them. -- Carpetmaster101 00:58, 18 December 2008 (UTC)
I'd like to put in a request for Kentucky Route 770. I'd like to start working on some Kentucky articles in the near future, but noticed that there are several missing, and I don't have the means to make them at this time. I may have a request for more shields as we go, too. Thank you very much! DanTheMan474 (talk) 22:16, 22 January 2009 (UTC)

Accept request for KY 770 shield. Since all of the images have been removed from the SH list, there isn't a need to fulfill that part of the request at the moment. – TMF 00:32, 13 June 2009 (UTC)

 Done Elongated circle 770.svgTMF 00:55, 13 June 2009 (UTC)

Atlantic City-Brigantine Connector

May I have a shield for the Atlantic City-Brigantine Connector like the one in File:AC Connector sign.jpg? Dough4872 (talk) 17:15, 9 February 2009 (UTC)

File:Atlantic City Expy Connector.svg - the "connector" font isn't the exact font, but it was the closest thing I have. If nothing else, it's a start. – TMF 03:23, 13 June 2009 (UTC)
It will do, thanks. Dough4872 (talk) 00:27, 14 June 2009 (UTC)

More shields for Alachua County, Florida

I know my other requests haven't been fulfilled yet, but I'm looking for yet more shields for the List of county roads in Alachua County, Florida, and any completion lists where they'd show up. ----DanTD (talk) 13:04, 19 February 2009 (UTC)

Accepted and  Done hesitantly with the knowledge that these boys are in Alachua County. Brandonrush Woo pig sooie! 14:32, 3 June 2009 (UTC)
Alachua County Road 26A FL.svgAlachua County Road 214 FL.svgAlachua County Road 219 FL.svgAlachua County Road 222 FL.svgAlachua County Road 325 FL.svgAlachua County 200A.svgAlachua County 2034.svgAlachua County Road 2041 FL.svgAlachua County Road 2045 FL.svgAlachua County Road 2085 FL.svgAlachua County Road 3298 FL.svg

Hawaii State Routes...

I was going to work on the Hawaii backlog, when I realized that only a few of them had badges... whenever someone gets a chance, please create (at least) the ones on the backlog... It doesn't seem that there are that many at all, comparing this to this... there's a blank in the commons category... - Adolphus79 (talk) 18:31, 16 March 2009 (UTC)

Accepted, though Wiki Commons won't let me upload files with the "HI-xx.svg" format since it's too non-descriptive. However, i just uploaded a Hawaii 15 shield with the format "Hawaii_xx.svg" so we'll probably have to rename all the image links on the pages the new shield images will be linked to. Luokou (talk) 09:01, 24 April 2009 (UTC)
The issue has been resolved, and the "HI-xx.svg" works once again. – TMF 20:33, 4 June 2009 (UTC)
Accepting the ones linked to on the redirect page, will do very soon. – TMF 07:13, 8 June 2009 (UTC)

 DoneTMF 00:16, 13 June 2009 (UTC)

North Dakota Highway 200A

Could someone please create North Dakota 200A.svg for the junction list on North Dakota Highway 200? It looks like it's just the ND 200 shield with an ALT sign on top[10], but this would do something about the redlinks. TheCatalyst31 ReactionCreation 22:27, 15 June 2009 (UTC)

Changing {{Jct}} to {{Jct|state=ND|ND-Alt|200}} creates the Alt shield above the ND 200 shield.--Fredddie 23:29, 15 June 2009 (UTC)
That should work for the junction list, but there's still an automatic red link in the "Next route" part of the infobox. TheCatalyst31 ReactionCreation 00:21, 16 June 2009 (UTC)
Never mind, I see that's been fixed too. TheCatalyst31 ReactionCreation 00:22, 16 June 2009 (UTC)

Old Oklahoma turnpike shields

Requesting shields for all turnpikes listed on {{Oklahoma Turnpikes}}. Current shield is available, but is fair use; I'd like to see what's out there in terms of the older shields (had an OK outline) which would probably be PD due to simplicity. Not sure if the same design was used for all turnpikes or not. —Scott5114 16:18, 8 November 2007 (UTC)

Examples:
I've seen the Muskogee Tpk state-outline shield in the field last week, so perhaps this is indeed the best course of action. —Scott5114 22:16, 20 November 2007 (UTC)
I'll look into the design. It doesn't seem too difficult to make, but I may be missing something. Accept nonetheless. --TMF Let's Go Mets - Stats 20:49, 19 February 2008 (UTC)
I'm revoking my acceptance; I'm not going to get to this for a while if at all. --TMF Let's Go Mets - Stats 02:56, 2 April 2008 (UTC)

Well, my internet has been flaky as of late so I decided to use my time to make some shields on this page, including this request. I've made and uploaded a rendering of the Muskogee Turnpike shield to File:Muskogee Turnpike shield (old).svg. If that looks good, I can upload a shield for the Indian Nation Turnpike as well. – TMF 02:27, 13 June 2009 (UTC)

Essex County NY roads

As per comments on Wikipedia:Featured list candidates/List of highways in Essex County, New York/archive1 - I need a complete set of county route shields (standard pentagon) for the chart. Also, I need reference markers for NY 915K, 915F, 910M, 910K, 912T and 913Q. If these could be hurried before my top 2 requests, thanks.Mitch/HC32 18:46, 17 June 2009 (UTC)

I'm on my way with the Essex CRs. —Mr. Matté (Talk/Contrib) 01:56, 18 June 2009 (UTC) The CR shields are loaded and already on the list! —Mr. Matté (Talk/Contrib) 02:37, 18 June 2009 (UTC)

 Done Now have the requested reference markers up, although since I'm new at those, I'm not sure if the numbers are correct: (NY-910K.svg, NY-910M.svg, NY-912T.svg, NY-913Q.svg, NY-915F.svg, NY-915K.svg) —Mr. Matté (Talk/Contrib) 02:59, 18 June 2009 (UTC)

Wow, thanks :) - unless i find a document listing an example, you should be fine :) - Mitch/HC32 09:47, 18 June 2009 (UTC)

Sullivan County Roads

Can someone create the set of shields for [http://www.empirestateroads.com/cr/crsullivan.html Sullivan County, New York using this source. If it would be possible, thanks!Mitch32(Go Syracuse) 23:41, 26 January 2009 (UTC)

Accept --Carpetmaster101 22:55, 30 January 2009 (UTC)
How long is it going to take? (I know the site I linked is down).Mitch32(Go Syracuse) 22:27, 20 February 2009 (UTC)
Since the site is working now, I will finish. --Carpetmaster101 04:30, 26 June 2009 (UTC)
 DoneI believe --Carpetmaster101 06:00, 26 June 2009 (UTC)

Goodhue County, Minnesota

Sorry, I also created a section of this on the "archive" page. I did not see the link to the new page.

Anyway, I recently created the page List of County Roads in Goodhue County, Minnesota. I have temporary signs that will not do in the long run, so I need signs specifically for Goodhue County.

I need county route signs for routes 1-9 now. I will create sections for 10-14, 16-18, 21-25 ASAP.

These routes are all signed with the standard blue pentagon.

Additionally, in the article U.S. Route 52 in Minnesota, there needs to be a sign for Dakota County route 47, and several Olmsted County routes. Dakota 47 and Olmsted 12 are the only routes in this group that use the standard pentagon. The others use the black-on-white square.

Thanks, --Moland freak (talk) 12:51, 24 June 2009 (UTC)

Accept --Carpetmaster101 23:43, 26 June 2009 (U
 Done if and when you need shields made just come here --Carpetmaster101 02:02, 27 June 2009 (UTC)

Commons blacklist?

I tried uploading Iowa US Route shields that followed Iowa's MUTCD, but Commons seems to be blacklisting again. I tried uploading as File:US XX (IA).svg. I'll re-save them to make sure it's not a corrupt file. --Fredddie 21:31, 27 June 2009 (UTC)

From my low-level regex experience, it looks like the "(IA)" is causing the file name to fall outside the whitelist regex. If you post to Commons:MediaWiki talk:Titleblacklist about this issue, they'll fix the whitelist regex to allow it. – TMF 21:47, 27 June 2009 (UTC)
Looks like this is resolved, so I'm going to mark this as  Done. – TMF 00:51, 30 June 2009 (UTC)
You are correct. --Fredddie 03:43, 30 June 2009 (UTC)

Cattaugarus County Route 45

Can I have a shield for this so I can place it in Pennsylvania Route 546?Mitch/HC32 20:31, 1 July 2009 (UTC)

Accept --Carpetmaster101 21:34, 1 July 2009 (UTC)
 Done Cattaraugus County Route 45 NY.svg --Carpetmaster101 21:45, 1 July 2009 (UTC)
Thanks!Mitch/HC32 21:49, 1 July 2009 (UTC)

Toll Road Georgia 400

I'm looking for a shield that looks like this Toll Florida 91.svg but for Georgia State Route 400. -Aws06828

There is already a sheild posted in the infobox for the article: Georgia 400 Toll.svg. –CG 00:08, 3 July 2009 (UTC)
I'd like to see a picture of that in use in Georgia.--Fredddie 06:31, 3 July 2009 (UTC)

I was looking for something like this : File:Tollga400.png but I just made it instead. Figured out a way. Thanks though. -Aws06828

I believe the reason that no one here made one is that the sign doesn't exist in reality. – TMF 21:09, 13 July 2009 (UTC)

Fictional Interstate

I'd like a blank interstate shield with the number 21 . —Preceding unsigned comment added by Walkerflee22 (talkcontribs) 06:57, 5 July 2009 (UTC)

I don't know what you mean by "blank Interstate shield," but there's already an I-21 shield made. —Mr. Matté (Talk/Contrib) 13:47, 5 July 2009 (UTC)
Unless I'm missing something, like Mr. Matté said, the requested shield already exists so I'm marking this as  Done. – TMF 21:16, 13 July 2009 —Preceding unsigned comment added by 70.127.161.59 (talk) 03:40, 20 July 2009 (UTC)
And I'd like the Prince symbol in a beehive. --NE2 05:41, 20 July 2009 (UTC)

And I want a triangle shield with the number A22

Circle sign 493.svg

Is this the right place to post this? I was looking for someone to create File:Circle sign 493.svg for use in the Meridian, Mississippi article. I would create it myself if the image was in another format, but I'm not familiar with creating svg's. If this is not the right place, please direct me to where I should ask, but the file should be similar to File:Circle sign 495.svg. If it's not too much trouble, 494 and 496 would also be useful, though they're not as important since they're not in the city's limits. Thanks in advance! --Dudemanfellabra (talk) 05:18, 16 July 2009 (UTC)

 Done and copied from WP:USRD/S --Fredddie 06:04, 16 July 2009 (UTC)
Wow, that was fast! Thanks! --Dudemanfellabra (talk) 06:08, 16 July 2009 (UTC)
494 and 496 done as well. --Fredddie 06:11, 16 July 2009 (UTC)

State route

I want a square shield with the number 22A --Walkerflee22 (talk) 02:15, 21 July 2009 (UTC)

MA Route 22.svg Like this which was already available? --Fredddie 02:50, 21 July 2009 (UTC)
Is this shield intended for use in articles? If not, it's highly unlikely that anyone will be willing to make it and you'd be better off downloading Inkscape and making it yourself instead. – TMF 17:12, 21 July 2009 (UTC)

Forest Route 44

For the Washington State Route 123 article, I need a Forest Route 44 sheild at File:Forest Route 44.svg. Thanks! –CG 22:13, 24 July 2009 (UTC)

Accepted — give me a few to make it and it shall be done. Imzadi1979 (talk) 03:16, 25 July 2009 (UTC)
Done Forest Route 44.svg Imzadi1979 (talk) 03:30, 25 July 2009 (UTC)
Thanks! –CG 20:28, 25 July 2009 (UTC)

US-23A

The US-23A section of Bannered routes of U.S. Route 23 needs a US-23A shield. Ten Pound Hammer, his otters and a clue-bat • (Many ottersOne batOne hammer) 22:18, 4 September 2009 (UTC)

 Done The commons blacklist is preventing me from uploading this shield at this time. --Fredddie 21:47, 20 November 2009 (UTC)
Blacklist issue was fixed. --Fredddie 17:15, 21 November 2009 (UTC)

Idaho scenic highways

I'm on vacation, otherwise I'd do this myself. While driving through Idaho, recently, I discovered that scenic highways are signed with a brown shield instead of black. ID-3 and ID-97 were the two I saw, but there may be more. --Fredddie 14:01, 12 September 2009 (UTC)

I also noticed US 30 in Idaho is signed in places with a brown-on-white shield. Basically, what's normally black is white and what's normally white and brown. --Fredddie 02:40, 17 September 2009 (UTC)
Like these? ID-Scenic-3.svgID-Scenic-21.svgID-Scenic-97.svgUS 30 (ID-Scenic).svg Brandonrush Woo pig sooie! 21:07, 17 September 2009 (UTC)
I would consider adding a 1px black border to the US 30 shield so that the shield doesn't look like a cutout. – TMF 23:54, 17 September 2009 (UTC)
Those are great, thanks; but I would heed TMF's advice and put a 1px black border around the brown US 30. Like I said, I would have done them myself, but I just got back today from my honeymoon. --Fredddie 03:47, 19 September 2009 (UTC)

Business Interstate Loop 376

I am requesting a Business Interstate Loop 376 shield because of the extension of Interstate 376. BL I-376 will replace BUS PA-60 in Moon Township. That way, I can be ahead of the game and edit both the I-376 and BUS PA-60 articles before the route is changed. Thanks, Joeeesch (talk) 23:37, 3 October 2009 (UTC)Joeeesch

Do you have any reliable sources for the renaming of PA 60 Business? --NE2 01:46, 4 October 2009 (UTC)

The renaming has since been confirmed; see the I-376 article for a source. – TMF 21:53, 20 November 2009 (UTC)

Business Loop 376.svg  Done --Fredddie 22:04, 20 November 2009 (UTC)

FR 70

For Washington State Route 410, I need a shield for Forest Route 70 (at File:Forest Route 70.svg), based on any other Forest Highway shield. Thanks, –CG 20:46, 24 October 2009 (UTC)  Done --Fredddie 21:38, 20 November 2009 (UTC)

Farm to Market Road 855

Can I get a shield for Farm to Market Road 855 (Texas FM 855.svg) for the infobox on Farm to Market Road 346? Thanks, TheCatalyst31 ReactionCreation 00:09, 19 November 2009 (UTC)

 Done --Fredddie 21:50, 20 November 2009 (UTC)

State Route 2005 (Delaware County, Pennsylvania)

Could someone please fix the quadrant route shields in the Major intersections section? I want them to look more like File:PA QR 2005.svg. Thanks ~EDDY (talk/contribs/editor review)~ 19:48, 18 August 2009 (UTC)

Accepted Brandonrush Woo pig sooie! 20:08, 18 August 2009 (UTC)
 Done PA QR 3023.svg PA QR 2024.svg Just some text-to-path issues. Brandonrush Woo pig sooie! 20:27, 18 August 2009 (UTC)

Just realized that the names these shields under which they were uploaded are wrong (these are "File:Quadrant Route xxxx.svg" while the standard is "File:PA QR xxxx.svg"). I know renaming images on Commons is a pain in the neck but something has to be done otherwise the now-corrected shields won't show up in template-heavy article. —Mr. Matté (Talk/Contrib) 21:06, 18 August 2009 (UTC)

I'm working on changing the names. I'm doing it manually, since I have no idea how to redirect files at commons. There should be some easier way. ~EDDY (talk/contribs/editor review)~ 17:02, 20 August 2009 (UTC)

Nassau County shields

Can someone make shields for Nassau County NY? Some are already up. Here is a reference: [11] - Mitch32(Go Syracuse) 21:22, 13 February 2009 (UTC)

Do you want the historic orange and blue shields or the standard color? Brandonrush Woo pig sooie! 14:36, 17 June 2009 (UTC)
Probably the orange; Nassau County never used the MUTCD-standard blue signs (in fact, it was the MUTCD's stipulation that the signs be blue that led the county to junk the orange signs). – TMF 15:06, 17 June 2009 (UTC)
I was under the impression that if signs were to be posted, they would have to be standard blue. I can do orange, however. You can take this if you want TMF, I can't do this for a few days anyway. If you don't want to, I can take this as well, but there will be a short delay. Brandonrush Woo pig sooie! 18:36, 17 June 2009 (UTC)
Yeah, I believe it was the 1972 MUTCD that first specified that county route shields had to be blue. Nassau's CR signage predated that time, which was why they were allowed to be orange. They could have remained orange past 1972; however, Nassau County wouldn't receive external funding to maintain the signs since they weren't MUTCD-compliant. As a result, the county elected to remove all of the signage rather than spend the money to replace them all.
As for the request, I might have time to do this. Got a couple other things going on at the moment, so I dunno. – TMF 18:45, 17 June 2009 (UTC)
I added some of the two-digit shields (some were already there), but do not have a template for the three-digit ones. I also added the links to every shield (available or not) to List of county routes in Nassau County, New York. Brandonrush Woo pig sooie! 18:22, 20 June 2009 (UTC)
Nassau County Route 2 NY.svgNassau County Route 2A NY.svgNassau County Route 5A NY.svgNassau County Route 5B NY.svgNassau County Route 7A NY.svgNassau County Route 12 NY.svgNassau County Route 15 NY.svgNassau County Route 22 NY.svgNassau County Route 25 NY.svgNassau County Route 27 NY.svgNassau County Route 75 NY.svgNassau County Route 85 NY.svg
It looks like the 2A shield still has text for the number instead of a converted path that was text. As for the three-digit routes, they use the same format as the two-digit ones; the route number is small enough that placing a three-digit number on the shield will work. – TMF 19:56, 20 June 2009 (UTC)

 Done Nassau County Route 11A NY.svgNassau County Route 101 NY.svgNassau County Route 107 NY.svgNassau County Route 110 NY.svgNassau County Route 177 NY.svgNassau County Route 189 NY.svgNassau County Route 231 NY.svgNassau County Route 257 NY.svgNassau County Route 260 NY.svg Thank you TMF, you saved me much time by pointing out that three digits fit on the two digit shield. Good catch on File:Nassau County Route 2A NY.svg. Brandonrush Woo pig sooie! 21:28, 20 June 2009 (UTC)

There are a lot more routes :| - see here: Steve Anderson's list - Mitch/HC32 22:52, 20 June 2009 (UTC)
I have started the rest of the routes. Nassau County Route 1A NY.svgNassau County Route 1B NY.svgNassau County Route 3 NY.svgNassau County Route 6 NY.svgNassau County Route 7B NY.svgNassau County Route 7C NY.svgNassau County Route 13 NY.svgNassau County Route 14 NY.svgNassau County Route 15A NY.svgNassau County Route 16 NY.svgNassau County Route 17 NY.svgNassau County Route 18 NY.svgNassau County Route 19 NY.svgNassau County Route 20 NY.svgNassau County Route 21 NY.svgNassau County Route 22A NY.svgNassau County Route 23 NY.svgNassau County Route 24 NY.svgNassau County Route 25A NY.svgNassau County Route 25B NY.svgNassau County Route 25C NY.svg 94% of the list is red links, so maybe whoever is requesting these should start with the 46 available shields that don't have articles before I spend hours making shields that won't have articles for a looooong time. Brandonrush Woo pig sooie! 21:10, 11 August 2009 (UTC)
Don't get articles. This is for an incomplete list, and maybe articles where necessary.Mitch32(Want help? See here!) 21:15, 11 August 2009 (UTC)

NY shields need changing

Completed portion of request

According to a contact from the New York State Department of Transportation and their MUTCD supplement, the shields we are using for NY touring routes is off. The shields we are looking for are like the ones used in Mark Sinsabaugh's NY routes site. This would apply for most routes (Note; Use Wiki listings please).

[12] has a higher-resolution image of the "correct" shields on page 83. – TMF 02:27, 25 June 2009 (UTC)
Eh, you know what, I'll take this. I have a couple of SVG mockups of the "new" 2-digit and 3-digit shields around here somewhere... – TMF 02:44, 25 June 2009 (UTC)
Found them. I cleaned them up slightly (node cleanup) and uploaded a couple of "pilot" shields for the blank (File:NY-blank.svg) and NY 88 (File:NY-88.svg). – TMF 02:57, 25 June 2009 (UTC)
Pardon my asking, what's so different? I looked at the examples and I don't see what's different. --Fredddie 03:04, 25 June 2009 (UTC)
To an average reader, there isn't really any difference. However, to the "hardcore" NY roadgeeks, our shields had become a bit of fodder for putting down this site because of how quirky it was, namely how wide the hump on top was, how little "black" space there was at the bottom of the shield, and how our numbers were 13" (I suppose) high instead of the MUTCD-specified 12". All of the current shields were made and uploaded prior to New York releasing a publicly available sign drawing for its shields; now that they have, it makes sense to update ours, even if in the long run there isn't much to gain from this. It's all about being accurate IMO. – TMF 13:17, 25 June 2009 (UTC)
I should point out that there is some precedent for this: when the new Oklahoma shields came out, our initial shields were an approximation of them. However, when users found the OK sign detail, they were redone and replaced. The first was probably passable to the casual reader, but clearly wrong, and I feel that's the case here with the New York shields as well. – TMF 13:21, 25 June 2009 (UTC)
Now that shields are being updated, I can see it's quite a difference. --Fredddie 20:38, 25 June 2009 (UTC)
All two-digit and one-digit suffixed routes have been updated. I'll work on the remaining routes later tonight. – TMF 16:13, 25 June 2009 (UTC)
OK, I plan on finishing off the remaining shields today. I'll admit, I've been contacting several "in-the-know" NY roadgeeks throughout this process; however, none of them have given me any indication of how good or bad my new three-digit shields are. To me, they look like they're done exactly per the NY MUTCD supplement specs, so I'm not going to wait for feedback any longer as I'd like to get this finished off ASAP. – TMF 15:38, 30 June 2009 (UTC)
This part of the request is virtually  Done; just waiting on Commons to change the whitelist to allow the two new NY shield type conventions. Once that is done, the 1960s NY 382 and NY 393 shields will be moved to the 1960s NC and they'll be replaced at NY-x.svg by the modern design. As of this moment, those are the only two shields that have not been updated. – TMF 01:54, 1 July 2009 (UTC)
Now completely  DoneTMF 16:09, 1 July 2009 (UTC)

Also, dunno if we can, but is it possible to have shields made for the following articles in this style? They would apply to:

Sure there are more, but that's all I can think of.Mitch/HC32 02:16, 25 June 2009 (UTC)

Wait...some of these routes existed past 1962, and some well past that date. You told me of a sign with the current NY design (with the "NY" in the hump but otherwise current design) that was put up in January 1962, so any routes that existed past that time don't really need these shields. NY 16A and NY 31D were both in existence in January 1962. Others may have been as well. – TMF 14:22, 25 June 2009 (UTC)
Well, I wasn't thinking with 16A and 31D because I thought both were canned before the 60s. Now for NY 382, I uploaded a new shield with the current/with NY atop.Mitch/HC32 14:26, 25 June 2009 (UTC)
But do you know when this shield style was changed? – TMF 14:27, 25 June 2009 (UTC)
By 1975 according to this pic: of NY 25 in comparison to this from 1972 of NY 17, 17M, 207 and US 6.Mitch/HC32 14:35, 25 June 2009 (UTC)
Aright...so that has at least set up two ground rules: nothing after 1962 gets a cutout, and nothing after 1975 gets the "NY" hump. Still need to narrow this down more though before this goes wide-scale. – TMF 14:39, 25 June 2009 (UTC)
For the cutouts - here is a real one of those (no replica): NY 31 - Mitch/HC32 14:45, 25 June 2009 (UTC)
So...we're going to need a naming convention for both of the proposed shield sets. I'd rather not upload anything from either set to the existing NY-x.svg convention, because if NYSDOT ever reuses one of the currently unused designations, we would have to move the image anyway. I believe the NY-x.svg convention should be restricted to the current (post-1975) NY shields only, while the cutouts should be at "NY-x (cutout).svg" and the "NY humps", for lack of a better term, should be at "NY-x (1960s).svg". I like the cutout NC very much, the other...not so much. Thoughts from others? – TMF 20:51, 25 June 2009 (UTC)
Support but, as I brought up on IRC, most of the aforementioned designations won't be used again.Mitch/HC32 21:16, 27 June 2009 (UTC)
Still, I'd prefer to be consistent. I'd rather have a type (like "type=cutout" or "type=old") devoted to the shields than have them spread across two or three conventions and guess which one will bring them up. – TMF 21:27, 27 June 2009 (UTC)

Aright, I tentatively plan on working on this tonight or sometime later in the week. I have a cutout SVG made and ready to go, and I'm sure you've seen the "twist" I put on the 1960s-era shield for NY 382. As I proposed above, that shield will be moved to "NY-382 (1960s).svg" and "NY-382.svg" will be replaced with a modern one. The necessary types for {{infobox road}} (probably "NY old" and "NY cutout") will be set up shortly afterward. – TMF 15:38, 30 June 2009 (UTC)

I can see the use for a New York State Route 161A shield. As you might know, I've been working on eliminating redlinks on Road articles with similar names, mostly in New York so far, and I found out about the former NY 161A. So when I'm done with that, it could go on the existing completion list, and on the New York State Route 161 page as well. ----DanTD (talk) 11:56, 14 July 2009 (UTC)

I uploaded a template for the cutouts to File:NY-x (cutout).svg. For now, I ask that only routes that did not make it out of the 1930s receive cutout shields. We can loosen the range up later on if/when we figure out when the changeovers happened. – TMF 06:30, 21 November 2009 (UTC)

We should also make cutouts for the 1920s routes and all of the routes assigned as part of the 1930 renumbering. The justification behind the first is that those routes meet the "did not make it out of the 1930s" guideline; the reason for the latter is that any articles for routes that did not make it out of the 1930s will likely need cutouts of other, possibly currently existing routes, for junctions. – TMF 00:31, 23 November 2009 (UTC)

 Done --Fredddie 00:40, 26 November 2009 (UTC)

Chenango County Routes 4, 10, 10A and 19

Can I have shields for Chenango County NY Routes 4, 10, 10A and 19 be created? They use the normal pentagons.Mitch32(The Password is... See here!) 23:35, 16 October 2009 (UTC)

 Done for CRs 4, 10, and 19. Since I can only think of one place where CR 10A's shield would be used - the article on NY 319 - and since there's already a pic of a CR 10A shield in the field in that article, I don't see the need for an SVG mockup of the CR 10A shield. – TMF 04:16, 8 January 2010 (UTC)

County shield needed

We need a county shield for Jefferson County 77 in Alabama. An interchange with this road is now the easter terminus for the future Interstate 22, and the shield is needed for the exit list. Thanks! - Realkyhick (Talk to me) 20:42, 10 December 2009 (UTC)

 Done by User:InterstatesToTheCities on 19 December 2009 --Fredddie 21:37, 8 January 2010 (UTC)

File:PA-760.svg

I will need this shield for the new Pennsylvania Route 760 article.

Thanks,

HighwayMaster (talk) 20:05, 10 February 2010 (UTC)

Do you have any reliable sources that state that old PA 60 north of Sharon has been redesignated as PA 760? – TMF 20:19, 10 February 2010 (UTC)
It's on the page now. HighwayMaster (talk) 23:21, 11 February 2010 (UTC)
That's not a reliable source; see WP:RS. – TMF 23:36, 11 February 2010 (UTC)


Texas SH 11 Business

Hey, have a request for a Texas Business Highway 11 for the main Texas State Highway 11 junction list. This one is out of the ordinary, as it doesn't have a letter suffix like other Texas business routes. Thanks. 25or6to4 (talk) 05:42, 5 February 2010 (UTC)

 Done --Fredddie 07:16, 5 February 2010 (UTC)


Texas Toll roads

Ok, after going through the Texas routes, I have found out that most of the Toll Texas routes have the wrong color scheme. The original version created by TXDoT had white signs with blue numbering. Now that a few years have passed and signs have gone up, it turns out that most are the inverse: blue background with white numbering. The bottom section with the Texas flag and the word "Toll" has not changed. After examining all the State Toll routes in Texas, the following signs need fixing: file:Toll Texas 1.svg, file:Toll Texas 45.svg, file:Toll Texas 99.svg, file:Toll Texas 121.svg, file:Toll Texas 130.svg, and file:Toll Texas 255.svg. We also need a new Toll Texas 161 sign. Strangely, Toll 49 does not need changing, as it uses the blue text on white background. Thanks! 25or6to4 (talk) 22:32, 11 February 2010 (UTC)

According to the sign specs what we have is correct. Do you have a picture or new spec? --Fredddie 23:04, 11 February 2010 (UTC)
There's a good example for TX 99 at its page. The rest I checked on Google street view. The TX 161 sign I've seen personally as well. 25or6to4 (talk) 23:52, 11 February 2010 (UTC)
Any updates here? No rush. 25or6to4 (talk) 04:04, 23 March 2010 (UTC)
I can't speak for anyone else, but I'm reluctant to fulfill this request because the specs show something different than what's posted and thus being requested. The different design may be the new standard, but until the specs are updated one could also assume that the different design is the result of contractor error. – TMF 04:37, 23 March 2010 (UTC)
Sure, I have no issues with this. We can wait for now and hopefully Texas will get this figured out. Consider this request withdrawn. 25or6to4 (talk) 03:34, 26 March 2010 (UTC)


U.S. Route 34 Business (Estes Park, Colorado)

Resolved
 – Articles merged and {{infobox road small}} used. Imzadi1979 (talk) 01:43, 28 March 2010 (UTC)

I need a shield for this route. If it already exists, please notify me and tell me the name. Thanks. Pzoxicuvybtnrm 03:56, 25 March 2010 (UTC)

Try entering |marker_image=[[Image:Business plate.svg|70px|alt=A rectangular highway plate bearing the word "BUSINESS"]]<br>[[Image:US 34.svg|70px|alt=A highway sign in the shape of the United States shield bearing the number "34"]] at the top of the infobox. You'll get something like:
A rectangular highway plate bearing the word "BUSINESS"
A highway sign in the shape of the United States shield bearing the number "34"
and you'll be good to go. Added benefit, the ALT text is written out for you. Imzadi1979 (talk) 04:04, 25 March 2010 (UTC)
P.S. You could merge that article into U.S. Route 34 in Colorado and use {{infobox road small}}, and that template will generate the shield correctly. If you do that, remember to turn the link above into a redirect to the right section of the article. Imzadi1979 (talk) 04:07, 25 March 2010 (UTC)

I'll do that later, if someone finds my article too insignificant. If you'll notice, Colorado has its own infobox, where you don't have to enter the code for the image. So how do I input it? Pzoxicuvybtnrm 02:12, 26 March 2010 (UTC) Oops. I tried it, and it worked. Pzoxicuvybtnrm 02:14, 26 March 2010 (UTC)

Well, the general consensus at WT:USRD is that business loops in general should not have a separate article unless it has a significant history on its own. I'd say this article doesn't qualify. Imzadi1979 (talk) 03:40, 26 March 2010 (UTC)
Okay. Thanks for merging it. Pzoxicuvybtnrm 03:35, 28 March 2010 (UTC)

Florida State Road shields, again

I'm requesting another round of Florida State Road shields for the completion list, and at least one road article. I'm still waiting for the others, though. ----DanTD (talk) 20:52, 27 November 2009 (UTC)

 DoneTMF 04:51, 5 April 2010 (UTC)
Thanks. I'll keep waiting for the other requests. ----DanTD (talk) 12:50, 5 April 2010 (UTC)

KY state highway shields for U.S. Route 25E (25 shields)

This is a mainline U.S. route article that has recently become B-class, but is missing many shields for KY state routes. Naming convention is File:Elongated circle x.svg.

Shields are needed for routes 188, 190, 223, 225, 229, 441, 830, 930, 1487, 1527, 1534, 1629, 2014, 2015, 2415, 2417, 2418, 2420, 3085, 3151, 3153, 3431, 3438, 3439, and 3486. —Scott5114 [EXACT CHANGE ONLY] 11:18, 21 January 2010 (UTC)

 Done Enjoy! Brandonrush Woo pig sooie! 16:52, 4 April 2010 (UTC) Elongated circle 188.svg Elongated circle 190.svg Elongated circle 223.svg Elongated circle 225.svg Elongated circle 229.svg Elongated circle 441.svg Elongated circle 830.svg Elongated circle 930.svg Elongated circle 1487.svg Elongated circle 1527.svg Elongated circle 1534.svg Elongated circle 1629.svg Elongated circle 2014.svg Elongated circle 2015.svg Elongated circle 2415.svg Elongated circle 2417.svg Elongated circle 2418.svg Elongated circle 2420.svg Elongated circle 3085.svg Elongated circle 3151.svg Elongated circle 3153.svg Elongated circle 3431.svg Elongated circle 3438.svg Elongated circle 3439.svg Elongated circle 3486.svg

Texas FM/RM roads

Requesting shields for Farm to Market Roads 2419-2423 and 2425 (example). I plan to create these articles in the near future and need the shield for them. Thanks, Griffinofwales (talk) 01:40, 2 April 2010 (UTC)

Converse County Route 19 (Wyoming) and others

Would it be possible to create a county route shield for

  • Converse County Route 19
  • Converse County Route 30
  • Converse County Route 24
  • Converse County Route 32
  • Converse County Route 5
  • Converse County Route 17
  • Converse County Route 18

for an article I am creating that needs the shield? Thanks, Ngs61 (talk) 16:23, 27 February 2010 (UTC)

Are these on the standard blue pentagons? Imzadi1979 (talk) 07:56, 25 March 2010 (UTC)
Yes, thanks. Ngs61 (talk) 02:44, 26 March 2010 (UTC)
 Done
Thanks! Ngs61 (talk) 14:22, 8 April 2010 (UTC)

Could two more please be made for Converse County?

  • CR 11
  • CR 33

Thanks, Ngs61 (talk) 01:57, 9 April 2010 (UTC)  DoneFredddie 02:31, 9 April 2010 (UTC)

Once again, thanks! Ngs61 (talk) 19:21, 9 April 2010 (UTC)


Colorado 129

I need a shield for Colorado State Highway 129. No such article exists, but one is needed in State Highways in Colorado in the "Former" section. --PCB 03:50, 8 April 2010 (UTC)

Would it be the current style or the old COLO style? —Fredddie 04:18, 8 April 2010 (UTC)
Even older. It says "Colorado" on the top.--PCB 17:03, 8 April 2010 (UTC)
 Done Colorado 129 (1946).svgFredddie 21:29, 8 April 2010 (UTC)

Clear Creek CR 60

I need a shield for Clear Creek CR 60. It's a standard blue pentagon. --PCB 17:05, 8 April 2010 (UTC)

I'm guessing Colorado, but you really should let us know what state this is for. —Fredddie 21:31, 8 April 2010 (UTC)
Oh! I'm sorry. That was totally unintentional. Yes, it is Colorado. --PCB 19:20, 9 April 2010 (UTC)
 Done Clear Creek County Route 60 CO.svgFredddie 20:54, 9 April 2010 (UTC)

More Colorado CR shields

I need two more shields for Montrose CR 59 and 90. (Both are in Colorado.) --PCB 23:22, 11 April 2010 (UTC)

 Done Montrose County Route 59 CO.svgMontrose County Route 90 CO.svgFredddie 01:41, 12 April 2010 (UTC)

Another round of Florida CR shields

Once again, I'm requesting another random series of shields of the following County Roads in Florida:

Are these too many? ----DanTD (talk) 21:43, 1 September 2009 (UTC)

  • Yes. Please don't overwhelm the shields department. --Rschen7754 22:36, 8 January 2010 (UTC)
    • My apologies, then. I'll hold off any further requests until these are taken care of. ----DanTD (talk) 02:25, 10 January 2010 (UTC)
      • Somebody made three of the images, but two of them aren't showing up. They're the Orange County Road 535 & 545 shields for Florida State Road 50. ----DanTD (talk) 01:34, 4 April 2010 (UTC)
They show up for me. – TMF 01:36, 4 April 2010 (UTC)
I still don't see them. What's that trick that you're supposed to do with the page when simply pushing the refresh button doesn't work? ----DanTD (talk) 01:39, 4 April 2010 (UTC)
Try purging the cache. If you don't have the gadget installed, click the edit tab. When the edit screen comes up, change the action=edit to action=purge and hit return. That will purge the cache for the page. Imzadi1979 (talk) 01:46, 4 April 2010 (UTC)
That's it; Purge. ----DanTD (talk) 02:25, 4 April 2010 (UTC)
Yup. That worked. -----DanTD (talk) 02:27, 4 April 2010 (UTC)
There's also a setting in your user preferences, under gadgets, that puts a clock in the top right corner. The clock doubles as a link to purge the current page's cache. --Fredddie 03:16, 4 April 2010 (UTC)

Suffolk County Route 38A

Requesting Suffolk CR 38A shield for a future Rockland County-style list for Suffolk County Roads. Proof that the road existed can be found here(http://www.nycroads.com/roads/suffolk_026-050/ ).----DanTD (talk) 15:17, 23 September 2009 (UTC)

 Done, finally. —Fredddie 00:57, 15 April 2010 (UTC)
Thanks. There might be another Suffolk County Route shield I need, but I forgot what it was. ----DanTD (talk) 01:07, 15 April 2010 (UTC)

historic texas state highways

In this section, there are two redlinked images. I have no clue what they look like, but I assume that they look like the others. Please create. Thanks, Griffinofwales (talk) 22:06, 7 April 2010 (UTC)

 DoneFredddie 16:23, 23 April 2010 (UTC)

Saratoga-Rensselaer County(NY) Roads 125

If it's not going to overwhelm the shields department, and the shields aren't available(and so far, I don't think they are), I could use two new County Road shields for Saratoga CR 125 and Rensselaer CR 125 for the List of fixed crossings of the Hudson River, a potential article on Stillwater Bridge (Hudson River, New York), and the existing article on the Schuylerville Bridge. The existing shields for the Stillwater Bridge are incorrect, but I'm going to find a way to write them into the article(or maybe some other article), so that they won't be deleted. ----DanTD (talk) 22:58, 16 April 2010 (UTC)

It probably wouldn't be that urgent, but Saratoga and Rennselaer Counties make 3di shields different. Saratoga does the normal pentagon while Rennselaer signage is mostly wide.Mitch32(Growing up with Wikipedia: 1 edit at a time.) 16:34, 23 April 2010 (UTC)
 Done Interestingly enough, I made a shield for Rensselaer CR 120 a while back, so I knew its three-digit shields are wide. —Fredddie 16:43, 23 April 2010 (UTC)

Ocean CR 680 NJ

Can this be made? I know it wasn't ever signed, but it was proposed as the replacement to NJ 180 and I need the shield.Mitch32(The Password is... See here!) 18:09, 14 September 2009 (UTC)

Add a svg version of this.Mitch32(The Password is... See here!) 21:23, 16 September 2009 (UTC)
For the Dowd Avenue sign, it may be better to use the actual street sign design used by the city of Elizabeth. Dough4872 (talk) 22:17, 17 September 2009 (UTC)
Why? The state made the sign?Mitch32(The Password is... See here!) 22:23, 19 September 2009 (UTC)
I'm talking about the city-installed street signs on the ground, not the NJDOT-installed overhead signs. Dough4872 (talk) 13:55, 20 September 2009 (UTC)
Then make both, but those overheads are unique because the state are idiots.Mitch32(The Password is... See here!) 13:57, 20 September 2009 (UTC)
I know the overheads erroneously show the road as NJ 81. Dough4872 (talk) 14:02, 20 September 2009 (UTC)

New Jersey cutout shield

I would like to request a cutout New Jersey shield for Route S25. ---Dough4872 14:30, 27 November 2009 (UTC)

 Done --Fredddie 20:37, 27 November 2009 (UTC)
Thanks. ---Dough4872 01:31, 28 November 2009 (UTC)
I would like to request three more for 200, 201, and 203. ---Dough4872 01:57, 28 November 2009 (UTC)

Need Shield: AR 917

Info box for Arkansas Highway 917 ( http://en.wikipedia.org/wiki/Arkansas_Highway_917 ) needs a custom shield.

See http://www.flickr.com/photos/us_71/2282294573/ US 71 (talk) 06:07, 19 January 2010 (UTC)

 Done The only thing that's holding me back is the picture of the person fishing. If anyone finds this, let me know. —Fredddie 01:19, 6 April 2010 (UTC)
Arkansas 917-1.svgFredddie 23:22, 30 April 2010 (UTC)

A few more Florida CR shields

The last round of Florida County Road sheilds are much appreciated, as well as the ones from New York. That doesn't mean there aren't others that are needed.

Recently, I've been finding a lot of County Road shields in Sumter County, that I never knew existed. I thought they were mostly street name signs(well, most of them are anyhow). So, I'm sure I'm going to have to keep my eyes peeled for them. ----DanTD (talk) 17:00, 23 April 2010 (UTC)

Sorry about archiving CR 441; all those done templates made it look like everything was done. Double checking, I see it wasn't done. —Fredddie 17:06, 23 April 2010 (UTC)
 Done These are all done now. —Fredddie 17:24, 23 April 2010 (UTC)
Thanks a lot. I'll keep looking for others. ----DanTD (talk) 17:59, 23 April 2010 (UTC)

UPDATE

Big mistake on my part. I need one for Sumter County Road 567, not 576. I'll fix the list now. ----DanTD (talk) 18:03, 23 April 2010 (UTC)

Here's proof of my mistake. ----DanTD (talk) 18:13, 23 April 2010 (UTC)

 Done as well —Fredddie 05:32, 24 April 2010 (UTC)

Thanks again, and now I wish there were evidence of a Sumter CR 576. ----DanTD (talk) 05:36, 24 April 2010 (UTC)